1321.11 Assembling and Heating Brazed Joints — 2025 California Plumbing Code

California Plumbing Code (Title 24, Part 5) · 2025 edition · updated 2026-09-25 · California

CBSC: official editions, supplements and errata

Italicized text is a California amendment to the model code, as printed in the official publication.

Cite as: 2025 California Plumbing Code (Title 24, Part 5) § 1321.11 · Effective January 1, 2026 · Official source: Building Standards Commission

Tube ends shall be inserted into the socket, either fully or to a mechanically limited depth that is not less than the minimum cup depth (overlap) specified by ASME B16.50. [NFPA 99:5.1.10.4.6.1]

1321.11.1 Heating of Joint. Where flux is permitted, the joint shall be heated slowly until the flux has liquefied. After flux is liquefied, or where flux is not permitted to be used, the joint shall be heated quickly to the brazing temperature, taking care not to overheat the joint.

[NFPA 99:5.1.10.4.6.2, 5.1.10.4.6.3]

Get a plain-English answer with a citation back to this text.

Ask AI about this code

Export this section

▸Contents — California Plumbing Code (Title 24, Part 5)

California Plumbing Code (Title 24, Part 5)

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.