Article 16 — SP Zone Requirements And Standards For Specific Plan No. 288
18.5 of Ordinance No.
Riverside County Municipal Code · 2026-09 edition · updated 2026-09-27 · Riverside County
348 except that the standards set forth in Section 18.5.b, c., e., and j. shall be
deleted and replaced, respectively, with each of the following:
A.
Height limitation. The height of buildings shall not exceed forty-five (45) feet.
B.
Setbacks.
The distance between buildings shall be no less than six feet.
The minimum building setbacks from a project's exterior streets and boundary lines shall be two and one- half (2.5) feet.
The minimum building setback from interior drives shall be three feet, except that second floor living space and balconies located in the rear yard shall be permitted within one foot of the rear property line.
C.
Residential structures. The number of dwelling units in one building shall not exceed eighteen (18) units.
D.
Walkways. Pedestrian walkways within a minimum width of four feet shall be installed between the dwelling units and the recreational areas of the project.
In addition, the following development standards shall also apply:
AA.
No dwelling shall be constructed unless it has a minimum floor living area of not less than 750 square feet. Porches, garages, patios, and similar features, whether attached or detached to a dwelling, shall not be included when calculating the floor living area.
BB.
Tandem garages are permitted.
(4)
The development standards for non-residential uses in Planning Areas 1, 6, 7 and 11 of Specific Plan No. 288 shall be the same as those standards identified in Article VI, Section 6.2 of Ordinance No. 348.
(5)
Except as provided above, all other zoning requirements shall be the same as those requirements identified in Article VI and in Article XVIII, Section 18.5 of Ordinance No. 348.
(Ord. No. 348.4772, § 2a, 12-17-2013; Ord. No. 348.4881, § 1a, 2-27-2018)
Get a plain-English answer with a citation back to this text.
Ask AI about this code