Ripon Municipal Code Ch. 12.20 Curb and Gutter Grades

A. The official curb and gutter grades in the city are established and determined for all purposes hereafter as set forth in that certain map entitled "Profile of Streets and Gutter Flow Lines, Ripon and Environs" filed with the city clerk on October 26, 1948, which map is made a part of this chapter by reference the same as if fully set out herein. The existing curbs, sewers, gutters and sidewalks and proposed flow lines of gutters as set out on the map are established and determined for all purposes as the official sewers, curb, gutter, sidewalk and flow lines of the city. B. The figures shown on the map at the corners of the block lines represent the official elevation of the flow line of the existing or proposed gutters of the city. C. The location of bench marks and their numbers are shown upon the map and the elevations of these bench marks are filed in the office of the city clerk. All bench marks are filed in the office of the city clerk. All bench marks, as designated upon the map, are referred to the United States Geological Survey data. (Ord. 48 §§ 1-3, 1950)

The provisions of this chapter shall not be construed as applying to any improvements for which resolutions of intention have already been passed. (Ord. 48 § 4, 1950)

and sidewalks required. All curbs, gutters and sidewalks installed within the corporate limits of the city must conform with the requirements as shown on the improved plans on file with the city clerk. (Ord. 48 § 5, 1950)

All construction and materials used in the construction of sewers, curbs, gutters and sidewalks must meet with the approval of the city engineer and must conform with the basic requirements as to construction and materials as designated by the city engineer. (Ord. 48 § 6, 1950)

Advertising Displays Adjacent to Freeways (2/61) 198