1502.3 Cross-Connection Inspection and Testing. An

initial inspection and test shall be performed on both the potable and alternate water source systems. The potable and alternate water source system shall be isolated from each other and independently inspected and tested to ensure there is no cross-connection in accordance with Section 1502.3.1 through Section 1502.3.3 .

(3) The drain on the alternate water source system shall

be checked for flow during the test and fixtures, potable and alternate water source, shall be tested and inspected for flow. Flow from an alternate water source system outlet indicates a cross-connection. No flow from a potable water outlet shall indicate that it is connected to the alternate water source system. (4) The potable water system shall then be depressur ized and drained.

(4) The potable water system shall then be depressur ized and drained. (5) The alternate water source system shall then be acti vated and pressurized. When an alternate water

(5) The alternate water source system shall then be acti vated and pressurized. When an alternate water source is not available for the initial test, a tempo- rary connection to a potable water supply shall be required. At the conclusion of the test, the temporary connection to the potable water supply shall be dis- connected. (6) The alternate water source system shall remain pres surized for a minimum period specified by the

1502.3.1 Visual System Inspection. Before commencing the cross-connection testing, a dual system inspection shall be conducted by the Authority Having Jurisdiction and other authorities having jurisdiction as follows: (1) Meter locations of the alternate water source and

potable water lines shall be checked to verify that

(6) The alternate water source system shall remain pres surized for a minimum period specified by the Authority Having Jurisdiction while the potable water system is empty. The minimum period the potable water system is to remain depressurized shall be determined on a case-by-case basis, but in no case shall that period be less than 1 hour. (7) Fixtures, potable, and alternate water source shall be

tested and inspected for flow. Flow from a potable

(1) Meter locations of the alternate water source and

potable water lines shall be checked to verify that no modifications were made and that no cross-connections are visible. (2) Pumps and equipment, equipment room signs and

exposed piping in equipment room shall be checked.

(7) Fixtures, potable, and alternate water source shall be

tested and inspected for flow. Flow from a potable water system outlet indicates a cross-connection. No flow from an alternate water source outlet will indicate that it is connected to the potable water system. (8) The drain on the potable water system shall be

checked for flow during the test and at the end of the

(8) The drain on the potable water system shall be

checked for flow during the test and at the end of the test. (9) Where there is no flow detected in the fixtures which

would indicate a cross-connection, the potable water

« «

(2) Pumps and equipment, equipment room signs and

exposed piping in equipment room shall be checked. (3) Valves shall be checked to ensure that the valve lock

seals are still in place and intact. Valve control door

Valves shall be checked to ensure that the valve lock

seals are still in place and intact. Valve control door signs shall be checked to verify that no signs have been removed.

(9) Where there is no flow detected in the fixtures which

would indicate a cross-connection, the potable water system shall be repressurized. 1502.3.3 Discovery of Cross-Connection. If a cross-connection is discovered, the following procedure shall be activated immediately: (1) Notify the Authority Having Jurisdiction of the cross

connection.

connection.

2019 CALIFORNIA PLUMBING CODE 311

ALTERNATE WATER SOURCES FOR NONPOTABLE APPLICATIONS any other purpose or distributed to any other persons or parties.

ALTERNATE WATER SOURCES FOR NONPOTABLE APPLICATIONS any other purpose or distributed to any other persons or

( 2 ) The alternate water source piping to the building and

its premises shall be shutdown at the meter, and the

«

( 2 ) The alternate water source piping to the building and

its premises shall be shutdown at the meter, and the alternate water source riser shall be drained. ( 3 ) Potable water piping to the building and its prem-

ises shall be shutdown at the meter.

( 3 ) Potable water piping to the building and its prem-

ises shall be shutdown at the meter. ( 4 ) The cross-connection shall be uncovered and dis connected.

( 4 ) The cross-connection shall be uncovered and dis connected. (5) The building and its premises shall be retested in

accordance with Section 1502.3.1 and Section

«

(5) The building and its premises shall be retested in

accordance with Section 1502.3.1 and Section 1502.3.2. ( 6 ) The potable water system shall be chlorinated with

50 parts-per-million (ppm) chlorine for 24 hours.

«

( 6 ) The potable water system shall be chlorinated with

50 parts-per-million (ppm) chlorine for 24 hours. ( 7 ) The potable water system shall be flushed after 24

hours, and a standard bacteriological test shall be