Chapter 10 — BOILERS AND PRESSURE VESSELS
1001.0 General.1001.1 Applicability. The requirements of this chapter shall
California Mechanical Code (Title 24, Part 4) · 2019 edition · updated 2026-09-10 · California
Italicized text is a California amendment to the model code, as printed in the official publication.
apply to the construction, installation, operation, repair, and alteration of boilers and pressure vessels. Low-pressure boilers shall comply with this chapter and Section 904.0. Exceptions: (1) Listed and approved potable water heaters with a nomi nal capacity not exceeding 120 gallons (454 L) and hav
(1) Listed and approved potable water heaters with a nomi nal capacity not exceeding 120 gallons (454 L) and having a heat input not exceeding 200 000 British thermal units per hour (Btu/h) (58.6 kW) used for hot water supply at a pressure not exceeding 160 pounds-force per square inch (psi) (1103 kPa) and at temperatures not exceeding 210°F (99°C), in accordance with the plumbing code. (2) Pressure vessels used for unheated water supply, includ ing those containing air that serves as a cushion and is
(2) Pressure vessels used for unheated water supply, includ ing those containing air that serves as a cushion and is compressed by the introduction of water and tanks connected to sprinkler systems. (3) Portable unfired pressure vessels and Interstate Com merce Commission (I.C.C.) containers.
(3) Portable unfired pressure vessels and Interstate Com merce Commission (I.C.C.) containers. (4) Containers for liquefied petroleum gases, bulk oxygen,
and medical gas that are regulated by the fire code.
(4) Containers for liquefied petroleum gases, bulk oxygen,
and medical gas that are regulated by the fire code. (5) Unfired pressure vessels in business, factory, hazardous,
mercantile, residential, storage, and utility occupancies
(5) Unfired pressure vessels in business, factory, hazardous,
mercantile, residential, storage, and utility occupancies having a volume not exceeding 5 cubic feet (0.14 m 3 ) and operating at pressures not exceeding 250 psi (1724 kPa). (6) Pressure vessels used in refrigeration systems shall com ply with Chapter 11.
(6) Pressure vessels used in refrigeration systems shall com ply with Chapter 11. (7) Pressure tanks used in conjunction with coaxial cables,
telephone cables, power cables, and other similar humid
(7) Pressure tanks used in conjunction with coaxial cables,
telephone cables, power cables, and other similar humidity control systems. (8) A boiler or pressure vessel subject to regular inspection
by federal inspectors or licensed by federal authorities.
(8) A boiler or pressure vessel subject to regular inspection
by federal inspectors or licensed by federal authorities.
Get a plain-English answer with a citation back to this text.
Ask AI about this code▸Contents — California Mechanical Code (Title 24, Part 4)
- Chapter 1 — GENERAL CODE PROVISIONS
- Chapter 2 — DEFINITIONS
- Chapter 3 — GENERAL REGULATIONS
- Chapter 4 — VENTILATION AIR
- Chapter 5 — EXHAUST SYSTEMS
- Chapter 6 — DUCT SYSTEMS
- Chapter 7 — COMBUSTION AIR
- Chapter 8 — CHIMNEYS AND VENTS
- Chapter 9 — INSTALLATION OF SPECIFIC APPLIANCES
▸Chapter 10 — BOILERS AND PRESSURE VESSELS
Overview- 1001.0 General.1001.1 Applicability. The requirements of this …
- 1001.2 Boiler Rooms and Enclosures. Boiler rooms and
- 1001.3 Air for Combustion and Ventilation. Air for
- 1001.4 Drainage. For heating or hot-water-supply boiler
- 1001.5 Mounting. Equipment shall be set or mounted on a
- 1001.6 Chimneys or Vents. Boilers shall be connected to
- 1002.1 General.1002.0 Standards. Pressure vessels shall be con…
- 1002.2 Oil-Burning Boilers. Oil-burning boilers shall
- 1002.3 Electric Boilers. Electric boilers shall be listed and
- 1002.4 Solid-Fuel-Fired Boilers. Solid-fuel-fired boilers
- 1002.5 Dual Purpose Water Heater. Water heaters utilized for c…
- 1003.1 Safety Requirements.1003.0 Detailed Requirements. The c…
- 1003.2 Controls. Required electrical, mechanical, safety,
- 1004.4 Minimum Capacity of Closed-Type Tank. The
- 1003.3 Gauges. Steam boilers shall be provided with a
- 1003.4 Stack Dampers. Stack dampers on boilers fired
- 1003.5 Welding. Welding on pressure vessels shall be done
- 1004.1 General.1004.0 Expansion Tanks. An expansion tank shall…
- 1004.2 Open-Type Expansion Tanks. Open type expansion tanks sh…
- 1004.3 Closed-Type Systems. Closed-type systems shall
- 1005.2 Discharge Piping. The discharge piping serving a
- 1005.5 Vacuum Relief Valve. Hot-water heating systems
- 1008.0 Low-Water Cutoff.1008.1 General. Hot water boilers and …
- 1005.3 Splash Shield. Where the operating temperature
- 1005.4 Hazardous Discharge. Where the discharge from
- 1010.1 General. 1010.0 Clearance for Access. Where boilers are…
- 1010.2 Power Boilers. Power boilers having a steam-generating …
- 1010.3 Steam-Heating Boilers, Hot Water Boilers, andPower Boil…
- 1012.1 General.1012.0 Operating Adjustments and Instructions. …
- 1013.1 General.1013.0 Inspections and Tests. An installation f…
- 1011.1 General. 1011.0 Boilers, Stokers, and Steam Generators.…
- 1013.2 Operating Permit. It shall be unlawful to operate a
- 1013.3 Maintenance Inspection. The Authority Having
- 1013.4 Power and Miniature Boilers. Power boilers and
- 1013.6 Automatic Steam-Heating Boilers. Automatic
- 1013.7 Unfired Pressure Vessels. Unfired pressure vessels shal…
- 1014.1 General. Pressure Vessels. Boilers and pressure vessels…
- Chapter 11 — REFRIGERATION
- Chapter 12 — HYDRONICS
- Chapter 13 — FUEL GAS PIPING
- Chapter 14 — PROCESS PIPING
- Chapter 15 — SOLAR ENERGY SYSTEMS
- Chapter 16 — STATIONARY POWER PLANTS
- Chapter 17 — REFERENCED STANDARDS
- Appendix A — RESIDENTIAL PLAN EXAMINER REVIEW FORM FOR HVAC SY…
- Appendix B — PROCEDURES TO BE FOLLOWED TO PLACE GAS EQUIPMENT …
- Appendix C — INSTALLATION AND TESTING OF OIL (LIQUID) FUEL-FIR…
- Appendix D — FUEL SUPPLY: MANUFACTURED/MOBILE HOME PARKS AND R…
- Appendix E — SUSTAINABLE PRACTICES
- Appendix F — SIZING OF VENTING SYSTEMS AND OUTDOOR COMBUSTION …
- Appendix G — EXAMPLE CALCULATION OF OUTDOOR AIR RATE