Chapter 16 — NONPOTABLE RAINWATER CATCHMENT SYSTEMS
1602.6 Sizing.
California Plumbing Code (Title 24, Part 5) · 2019 edition · updated 2026-09-10 · California
Italicized text is a California amendment to the model code, as printed in the official publication.
The design and size of rainwater drains, gutters, conductors, and leaders shall comply with Chapter 11 of this code.
Get a plain-English answer with a citation back to this text.
Ask AI about this code▸Contents — California Plumbing Code (Title 24, Part 5)
California Plumbing Code (Title 24, Part 5)
- Chapter 1 — GENERAL CODE PROVISIONS
- Chapter 2 — DEFINITIONS
- Chapter 3 — GENERAL REGULATIONS
- Chapter 4 — PLUMBING FIXTURES AND FIXTURE FITTINGS
- Chapter 5 — WATER HEATERS
- Chapter 6 — WATER SUPPLY AND DISTRIBUTION
- Chapter 7 — SANITARY DRAINAGE
- Chapter 8 — INDIRECT WASTES
- Chapter 9 — VENTS
- Chapter 10 — TRAPS AND INTERCEPTORS
- Chapter 11 — STORM DRAINAGE
- Chapter 12 — FUEL GAS PIPING
- Chapter 13 — HEALTH CARE FACILITIES AND MEDICAL GAS AND MEDICA…
- Chapter 14 — FIRESTOP PROTECTION
- Chapter 15 — ALTERNATE WATER SOURCES FOR NONPOTABLE APPLICATIONS
▸Chapter 16 — NONPOTABLE RAINWATER CATCHMENT SYSTEMS
Overview- 1601.2 System Design. Rainwater catchment systems shall
- 1601.3 Permit. It shall be unlawful for a person to construct,
- 1601.4 Component Identification. System components
- 1601.5 Maintenance and Inspection. Rainwater catchment systems…
- 1601.6 Operation and Maintenance Manual. An operation and main…
- 1601.7 Minimum Water Quality Requirements. The
- 1602.2 Plumbing Plan Submission. No permit for a
- 1602.3 System Changes. No changes or connections shall
- 1602.4 Connections to Potable or Reclaimed (Recy-
- 1602.5 Initial Cross-Connection Test. Where a portion
- 1602.6 Sizing. The design and size of rainwater drains, gutter…
- 1602.7 Rainwater Catchment System Materials. Rainwater catchme…
- 1602.8 Rainwater Catchment System Color and Mark-
- 1602.9 Design and Installation. The design and installation of…
- 1603.2 Construction. Rainwater storage tanks shall be
- 1603.7 Opening and Access Protection. Rainwater
- 1603.3 Location. Rainwater storage tanks shall be permitted to…
- 1603.4 Above Grade. Above grade, storage tanks shall be
- 1603.5 Below Grade. Rainwater storage tanks installed
- 1603.6 Drainage and Overflow. Rainwater storage tanks
- 1603.8 Marking. Rainwater tanks shall be permanently
- 1603.9 Storage Tank Venting. Where venting using
- 1603.10 Pumps. Pumps serving rainwater catchment systems shall…
- 1603.11 Roof Drains. Primary and secondary roof drains,
- 1603.12 Water Quality Devices and Equipment. Devices and equip…
- 1603.13 Freeze Protection. Tanks and piping installed in
- 1603.14 Debris Removal. The rainwater catchment conveyance sys…
- 1603.15 Required Filters. A filter permitting the passage
- 1603.16 Roof Gutters. Gutters shall maintain a minimum
- 1604.0 Signs.1604.1 General. Signs in buildings using rainwate…
- 1604.2 Commercial, Industrial, Institutional idential Restroom…
- 1604.3 Equipment Room Signs. Each equipment room
- 1605.2 Supply System Inspection and Test. Rainwater
- 1605.3 Cross-Connection Inspection and Testing. An
- Chapter 17 — REFERENCED STANDARDS
- Appendix A — RECOMMENDED RULES FOR SIZING THE WATER SUPPLY SYS…
- Appendix B — EXPLANATORY NOTES ON COMBINATION WASTE AND VENT S…
- Appendix C — ALTERNATE PLUMBING SYSTEMS
- Appendix D — SIZING STORM WATER DRAINAGE SYSTEMS
- Appendix E — MANUFACTURED/MOBILE HOME PARKS AND RECREATIONAL V…
- Appendix F — FIREFIGHTER BREATHING AIR REPLENISHMENT SYSTEMS
- Appendix G — SIZING OF VENTING SYSTEMS
- Appendix H — PRIVATE SEWAGE DISPOSAL SYSTEMS
- Appendix I — INSTALLATION STANDARD FOR PEX TUBING SYSTEMS FOR …
- Appendix J — COMBINATION OF INDOOR AND OUTDOOR COMBUSTION AND …
- Appendix K — POTABLE RAINWATER CATCHMENT SYSTEMS
- Appendix L — SUSTAINABLE PRACTICES
- Appendix M — PEAK WATER DEMAND CALCULATOR