1013.1 General.

1013.1 General. An installation for which a permit is required shall not be put into service until it has been [ ← ] certified by a licensed boiler contractor or inspected by an approved insuring company inspector and an operating permit has been issued.

← It shall be the duty of the owner or his authorized representative to notify the Authority Having Jurisdiction that the installation [ ] has been certified or inspected. It also shall be the duty of the owner or his authorized representative to post in a conspicuous position on the installation a notice in substantially the following form: “Warning! This installation has not been inspected and approved by the Authority Having Jurisdiction and shall not be covered or concealed until so inspected and approved,” and it shall be unlawful for anyone other than the Authority Having Jurisdiction to

← remove such notice. The Authority Having Jurisdiction shall require such tests as it deems necessary to determine that the installation [ ] complies with the provision of this section. Such tests shall be made by the owner or his authorized representative in the presence of the Authority Having Jurisdiction.

Exception: On installations designed and supervised by a registered professional engineer, the Authority Having Jurisdiction shall have the authority to permit inspection and testing by such registered design professional.