Chapter 17.36 — M-2 HEAVY MANUFACTURING DISTRICT

The M-2 general industrial district is intended to provide for the establishment of industrial uses essential to the development of a balanced economic base.

(Ord. 211 (part), 1980: prior code § 11-1-1401)

Uses permitted in M-2 district are:

A.

All uses permitted in the M-1 district, Section 17.34.020;

B.

Alcohol fertilizer, bulk sales and storage;

C.

Baled cotton storage;

D.

Building materials, concrete and cement products;

E.

Cotton compress, ready concrete;

F.

Used materials yards, organic fertilizer, bulk sales and storage;

G.

Manufacturing.

Automotive:

a.

Assembly,

b.

Battery manufacture,

c.

Body and fender works,

d.

Rebuilding.

Machinery shop (no punch press over twenty tons or drop hammers):

a.

Automatic screw machines,

b.

Blacksmith shops.

Manufacturing compounding assembly or treatment of articles or merchandise from the following previously prepared materials:

a.

Bone,

b.

Feathers,

c.

Hair,

d.

Horns,

e.

Paints, not employing a boiling process,

f.

Rubber.

Microwave relay structures,

Meat packing and meat processing.

H.

Emergency shelters.

(Ord. No. 380, § 1, 8-24-2016; Ord. 211 (part), 1980: prior code § 11-1-1402)

Uses permitted subject to conditional use permit are:

Acetylene gas manufacture or storage;

Acid manufacture;

Aircraft factory;

Alcohol distillation, including wineries and breweries (when not connected with adequate public sewers);

Aluminum foundry;

Ammonia bleaching powder or chlorine manufacture;

Animal and poultry slaughtering or packing;

Asphaltic and asphaltic concrete, mixing or batching plants;

Automobile wrecking, junk, rag or scrap iron storage or baling;

Blast furnace or coke oven;

Bone, coal or wood distillation;

Brick or tile products manufacture;

Cement, lime, gypsum, potash, or plaster of paris manufacture;

Cinder and cinder block manufacture;

Clay and clay products manufacturing;

Cotton ginning or oil milling;

Drop forge industries manufacturing forgings with power hammers;

Dumping, refuse;

Explosives manufacturing or storage;

Fat rendering, tallow, grease, or lard manufacture or refining;

Fertilizer (inorganic), the compounding of dried inorganic materials;

Fish smoking, curing, or canning;

Fruit and vegetable processing;

Fungicides manufacturing or processing;

Garbage, offal, dead animal, or refuse incineration, reduction or dumping;

Glass blowing (industrial) and glass bottle production;

Glass manufacturing;

Glue manufacturing;

Grain milling and sacking;

Insecticides manufacturing (flammable type);

Iron, steel, brass, or copper foundry or fabrication plant, including roller mill or boiler works;

Lamp black manufacture, including stove or shoe polish manufacture;

Oilcloth or linoleum manufacture;

Oils and fats (vegetable) refining;

Olive oil plant or olive processing plant;

Ore reduction, including refining and smelting of metals;

Organic fertilizer manufacturing;

Paint, pigments, enamels, japans, lacquers, putty, thinner, varnishes, whiting, wood fillers, and stains manufacturing;

Petroleum refining or petroleum product manufacture or storage, including gas and asphalt;

Plastic manufacture;

Railroad repair shops;

Rubber or gutta-percha manufacture;

Salt works;

Sand blasting;

Sawmills;

Soap manufacturing;

Soda and compound manufacturing;

Stock feed lots and stockyards;

Syrup and grape sugar manufacture;

Tanning, curing, or storing of rawhides or skins;

Wool pulling or scouring;

Yeast manufacturing;

Other uses which by written decision are determined by the commission to be obnoxious or detrimental to the public welfare by reason of the emission of odor, dust, smoke, gas, noise, vibration, or other causes.

Medical marijuana facilities subject to the conditions of approval set forth in Chapter 17.65; provided that no such facility may be permitted within one half mile of any governmental, medical or educational use.

(Ord. No. 362, § 2, 10-10-2012; Ord. 211 (part), 1980: prior code § 11-1-1403)

Uses expressly prohibited in the M-2 district are:

A.

Residential uses;

B.

Commercial;

C.

Any use identified as harmful to the Orange Cove community by the planning commission.

(Ord. 211 (part), 1980: prior code § 11-1-1404)

The property development standards of the M-1 district, Sections 17.34.050 through 17.50.180, shall apply, with the following exceptions: building height, none.

(Ord. 211 (part), 1980: prior code § 11-1-1405)

All uses shall be subject to the general provisions and exceptions, prescribed in Chapters 17.52 through 17.64.

(Ord. 211 (part), 1980: prior code § 11-1-1406)

Before any building or structure is erected on any lot in the M-2 district, a site plan pursuant to Chapter