Skip to content

Chapter 17 — REFERENCED STANDARDS

1701.2 Standards, Publications, Practices, and Guides.

California Mechanical Code (Title 24, Part 4) · 2022 edition · updated 2026-09-10 · California

Italicized text is a California amendment to the model code, as printed in the official publication.

The standards, publications, practices and guides listed in Table 1701.2 are not referenced in other sections of this code. The

application of the referenced standards, publications, practices and guides shall be as specified in Section 302.1.2. The promulgating agency acronyms are found at the end of the table.

TABLE 1701.2 STANDARDS, PUBLICATIONS, PRACTICES, AND GUIDES

DOCUMENT NUMBER DOCUMENT TITLE APPLICATION
ACCA Manual N-2012 Commercial Load Calculations Ducts
ACCA Manual Q-1990 Low Pressure, Low Velocity Duct System Design Ducts
AHRI 870-2016 Performance Rating of Direct Geoexchange Heat Pumps Heat Pumps
AHRI 1200-2013 Performance Rating of Commercial Refrigerated Display Merchandisers and
Storage Cabinets
Commercial Refrigerated
Display Merchandisers
and Storage Cabinets
AHRI 1230-2014a Performance Rating of Variable Refrigerant Flow (VRF) Multi-Split Air-Condi-
tioning and Heat Pump Equipment
Refrigerants
AMCA 500-D-2018 Laboratory Methods of Testing Dampers for Rating Dampers
ASCE 25-2016 Earthquake-Actuated Automatic Gas Shutoff Devices Fuel Gas
ASHRAE 52.2-2012 General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle
Size
Cleaning Devices
ASHRAE 55-2017 Thermal Environmental Conditions for Human Occupancy Miscellaneous
ASHRAE 62.2-2016 Ventilation and Acceptable Indoor Air Quality in Residential Buildings Ventilation
ASHRAE/IES 90.1-2016 Energy Standard for Buildings Except Low-Rise Residential Buildings Energy
ASHRAE/IES 90.2-2018 Energy-Efficient Design of Low-Rise Residential Buildings Energy, Dwellings
ASHRAE 127-2012 Method of Testing for Rating Computer and Data Processing Room Unitary Air
Conditioners
Air Conditioners
ASHRAE/ACCA 183-
2007 (R2017)
Peak Cooling and Heating Load Calculations in Buildings Except Low-
Rise Residential Buildings
Cooling and Heating
Load, Miscellaneous
ASHRAE 194-2012 Method of Test for Direct-Expansion Ground-Source Heat Pumps Ground-Source Heat
Pumps
ASHRAE Handbook-2016 HVAC Systems and Equipment Design
ASME A13.1-2015 Scheme for the Identification of Piping Systems Piping
ASME A112.18.6/CSA
B125.6-2017
Flexible Water Connectors Piping
ASME B1.20.3-1976 (R2018) Dryseal Pipe Threads (Inch) Joints
ASME B16.33-2012 (R2017) Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to
175 psi (Sizes NPS1⁄2 through NPS 2)
Valves
ASME B16.50-2018 Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings Fittings
ASTM A568/A568M-2017a Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and
Cold-Rolled, General Requirements for
Piping
ASTM A653/A653M-2017 Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvan-
nealed) by the Hot-Dip Process
Piping, Ferrous
ASTM A733-2016 Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples Piping, Ferrous

340 2022 CALIFORNIA MECHANICAL CODE

REFERENCED STANDARDS

TABLE 1701.2 (continued) STANDARDS, PUBLICATIONS, PRACTICES, AND GUIDES

DOCUMENT NUMBER DOCUMENT TITLE APPLICATION
ASTM B370-2012 Standard Specification for Copper Sheet and Strip for Building Construction Miscellaneous
ASTM B687-1999 (R2016) Brass, Copper, and Chromium-Plated Pipe Nipples Piping, Copper Alloy
ASTM C518-2017 Steady-State Thermal Transmission Properties by Means of the Heat Flow
Meter Apparatus
Certification: Calibration,
Error Analysis, Heat Flow
Meter Apparatus, Heat
Flux, Instrument Verifica-
tion, Thermal Conductiv-
ity, Thermal Resistance,
Thermal Testing, Tunnel
Test
ASTM D93-2018 Flash Point by Pensky-Martens Closed Cup Tester Certification
ASTM D396-2018a Fuel Oils Boiler
ASTM D2517-2018 Reinforced Epoxy Resin Gas Pressure Pipe and Fittings Piping, Plastic
ASTM E96/E96M-2016 Water Vapor Transmission of Materials Miscellaneous
ASTM E136-2016a Behavior of Materials in a Vertical Tube Furnace at 750°C Furnace
AWS B2.4-2012 Welding Procedure and Performance Qualification for Thermoplastics Joints, Certification
CSA/IGSHPA C448-2016 Design and Installation of Ground Source Heat Pump Systems for Commercial
and Residential Buildings
Miscellaneous
CSA C448.1-2016 Design and Installation of Ground Source Heat Pump Systems for Commer-
cial and Institutional Buildings
Ground-Source Heat
Pumps
CSA C448.2-2016 Design and Installation of Ground Source Heat Pump Systems for Residen-
tial and Other Small Buildings
Ground-Source Heat
Pumps
CSA Z21.1-2016 Household Cooking Gas Appliances Household Cooking
Appliances, Gas Fired
CSA Z21.5.1-2017 Gas Clothes Dryers, Volume I, Type 1 Clothes Dryers (same as CSA 7.1) Fuel Gas, Appliances
CSA Z21.5.2-2016 Gas Clothes Dryers,Volume II, Type 2 Clothes Dryers (same as CSA 7.2) Fuel Gas, Appliances
CSA Z21.11.2-2016 Gas-Fired Room Heaters, Volume II, Unvented Room Heaters Room Heaters, Unvented
Heaters
CSA Z21.12b-1994 (R2015) Draft Hoods Fuel Gas, Appliances
CSA Z21.13-2017 Gas-Fired Low Pressure Steam and Hot Water Boilers (same as CSA 4.9) Fuel Gas, Appliances
CSA Z21.15b-2013 (R2014) Manually Operated Gas Valves for Appliances, Appliance Connector Valves and
Hose End Valves (same as CSA 9.1b)
Fuel Gas
CSA Z21.17a-2008 (R2014) Domestic Gas Conversion Burners (same as CSA 2.7a) Conversion Burner Instal-
lation, Gas Burners
CSA Z21.18b-2012
(R2016)
Gas Appliance Pressure Regulators (same as CSA 6.3b) Appliance Regulators,
Gas Refrigerators, Pres-
sure Regulators
CSA Z21.19-2014 Refrigerators Using Gas Fuel (same as CSA 1.4) Gas Refrigerators, Refrig-
erators
CSA Z21.20a-2008
(R2016)
Automatic Gas Ignition Systems and Components Automatic Ignition, Gas
Ignition, Ignition

2022 CALIFORNIA MECHANICAL CODE 341

REFERENCED STANDARDS

TABLE 1701.2 (continued) STANDARDS, PUBLICATIONS, PRACTICES, AND GUIDES

DOCUMENT NUMBER DOCUMENT TITLE APPLICATION
CSA Z21.21-2015 Automatic Valves for Gas Appliances (same as CSA 6.5) Appliance Valves, Auto-
matic Gas Valves, Valves
CSA Z21.22-2015 Relief Valves for Hot Water Supply Systems (same as CSA 4.4) Valves
CSA Z21.40.1a-
1997/CGA 2.91a-M97
(R2017)
Gas-Fired, Heat Activated Air-Conditioning and Heat Pump Appliances Gas Fired Air Condi-
tioning, Gas Fired Heat
Pump
CSA Z21.42-2013 Gas-Fired Illuminating Appliances Illuminating Appliances
CSA Z21.47-2016 Gas-Fired Central Furnaces (same as CSA 2.3) Fuel Gas, Appliances
CSA Z21.50-2016 Vented Decorative Gas Appliances (same as CSA 2.22) Appliances, Decorative
Appliances
CSA Z21.56-2017 Gas-Fired Pool Heaters (same as CSA 4.7) Fuel Gas, Swimming
Pools, Spas, and Hot Tubs
CSA Z21.58-2018 Outdoor Cooking Gas Appliances (same as CSA 1.6) Cooking Appliances
CSA Z21.60-2017 Decorative Gas Appliances for Installation in Solid-Fuel Burning Fireplaces
(same as CSA 2.26)
Decorative Appliances,
Decorative Fireplace
Appliances
CSA Z21.61-1983 (R2013) Gas-Fired Toilets Toilets
CSA Z21.66-2015 Automatic Damper Devices for Use with Gas-Fired Appliances (same as CSA
6.14)
Vent Dampers, Automatic
Dampers
CSA Z21.71a-2005
(R2016)
Automatic Intermittent Pilot Ignition Systems for Field Installation Automatic Pilot Ignition,
Pilot Ignition
CSA Z21.86-2016 Vented Gas-Fired Space Heating Appliances (same as CSA 2.32) Fuel Gas Appliances
CSA Z21.88-2017 Vented Gas Fireplace Heaters (same as CSA 2.33) Fireplace Heaters
CSA Z83.8-2016 Gas Unit Heaters, Gas Packaged Heaters, Gas Utility Heaters, and Gas-Fired
Duct Furnaces (same as CSA 2.6)
Fuel Gas Appliances
CSA Z83.11-2016 Gas Food Service Equipment (same as CSA 1.8) Fuel Gas, Appliances
CSA Z83.19-2017 Gas-Fired High-Intensity Infrared Heaters (same as CSA 2.35) High Intensity Heaters,
Infrared Heaters
CSA Z83.20-2016 Gas-Fired Low-Intensity Infrared Heaters (same as CSA 2.34) Infrared Heaters, Low
Intensity Heaters
IAPMO IGC 293-2012 Tubing and Fittings for Special Hydronic Radiant Drywall Panels HVAC, Fittings, Tubing
IAPMO IGC 315-2016 Water Manifold Systems Fittings
IAPMO IGC 327-2016 Flexible Metallic Expansion Joints for Pressure Systems Joints
IAPMO IGC 332-2017a Hydronic Radiators Miscellaneous
IAPMO PS 120-2004 Flashing and Stand Combination for Air Conditioning Units (Residential or
Commercial Unit Curb)
Air Conditioning Flashing
Stand
ISO 13256-1-1998 (R2012) Water Source Heat Pumps-Testing and Rating for Performance-Water-to-Air and
Brine-to-Air Heat Pumps
Water-Source Heat Pumps
ISO 13256-2-1998 Water Source Heat Pumps-Testing and Rating for Performance-Water-to-Water
and Brine-to-Water Heat Pumps
Water-Source Heat Pumps

342 2022 CALIFORNIA MECHANICAL CODE

REFERENCED STANDARDS

TABLE 1701.2 (continued) STANDARDS, PUBLICATIONS, PRACTICES, AND GUIDES

DOCUMENT NUMBER DOCUMENT TITLE APPLICATION
MSS SP-67-2017 Butterfly Valves Valves
MSS SP-80-2013 Bronze Gate, Globe, Angle, and Check Valves Valves
MSS SP-104-2018 Wrought Copper Solder-Joint Pressure Fittings Fittings
MSS SP-106-2012 Cast Copper Alloy Flanges and Flanged Fittings: Class 125, 150, and 300 Fittings
MSS SP-109-2018 Weld-Fabricated Copper Solder-Joint Pressure Fittings Fittings
NFPA 30-2018 Flammable and Combustible Liquids Code Combustible Liquids,
Flammable Liquids
NFPA 91-2015 Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Particulate
Solids
Product Conveying Ducts
NFPA 96-2017 Ventilation Control and Fire Protection of Commercial Cooking Operations Commercial Cooking
NFPA 221-2018 High Challenge Fire Walls, Fire Walls, and Fire Barrier Walls Building Fire Walls, Fire
Barrier
NFPA 259-2018 Test Method for Potential Heat of Building Materials Testing, Building Mate-
rials
NFPA 274-2018 Test Method to Evaluate Fire Performance Characteristics of Pipe Insulation Pipe Insulation
NFPA 501A-2017 Fire Safety Criteria for Manufactured Home Installations, Sites, and Commu-
nities
Miscellaneous
NFPA 5000-2018 Building Construction and Safety Code Miscellaneous
NGWA-01-2014 Water Well Construction Standard Water Wells
NSF 60-2017 Drinking Water Treatment Chemicals - Health Effects Miscellaneous
NSF 358-4-2018 Polyethylene of Raised Temperature (PE-RT) Tubing and Fittings for Water-Based
Ground-Source (Geothermal) Heat Pump Systems
Ground-Source Heat Pumps
SAE J512-1997 Automotive Tube Fittings
Fittings
SMACNA-2003 Fibrous Glass Duct Construction Standard, 7thEdition Fiberglass Ducts
SMACNA-2008 IAQ Guidelines for Occupied Buildings Under Construction, 2ndEdition Ventilation
UL 21-2014 LP-Gas Hose (with revisions through July 28, 2017) Hose, LPG Hose
UL 33-2010 Heat Responsive Links for Fire-Protection Service (with revisions through April
14, 2015)
Fusible Links
UL 51-2013 Power-Operated Pumps and Bypass Valves for Anhydrous Ammonia, LP-
Gas, and Propylene (with revisions through October 5, 2018)
Ammonia Pumps, LP-
Gas Pumps, Pumps
UL 80-2007 Steel Tanks for Oil-Burner Fuels and Other Combustible Liquids (with revi-
sions through January 16, 2014)
Fuel Gas
UL 125-2014 Flow Control Valves for Anhydrous Ammonia and LP-Gas (with revisions
through January 12, 2018)
Fuel Gas
UL 132-2015 Safety Relief Valves for Anhydrous Ammonia and LP-Gas (with revisions
through January 12, 2018)
Fuel Gas
UL 144-2012 LP-Gas Regulators (with revisions through November 05, 2014) Fuel Gas
UL 174-2004 Household Electric Storage Tank Water Heaters (with revisions through Decem-
ber 15, 2016)
Appliances

2022 CALIFORNIA MECHANICAL CODE 343

REFERENCED STANDARDS

TABLE 1701.2 (continued) STANDARDS, PUBLICATIONS, PRACTICES, AND GUIDES

DOCUMENT NUMBER DOCUMENT TITLE APPLICATION
UL 180-2012 Liquid-Level Gauges for Oil Burner Fuels and other combustible liquids (with
revisions through May 12, 2017)
Gauges, Level Gauges
UL 252-2017 Compressed Gas Regulators (with revisions through August 10, 2018) Fuel Gas
UL 343-2008 Pumps for Oil-Burning Appliances (with revisions through December 14, 2017) Fuel Gas, Appliances
UL 353-1994 Limit Controls (with revisions through November 8, 2011) Controls
UL 404-2010 Gauges, Indicating Pressure, for Compressed Gas Service (with revisions
through February 11, 2015)
Fuel Gas
UL 429-2013 Electrically Operated Valves Valves
UL 443-2006 Steel Auxiliary Tanks for Oil-Burner Fuel (with revisions through March 8,
2013)
Fuel Gas
UL 525-2008 Flame Arresters (with revisions through October 13, 2017) Flame Arrestors
UL 565-2013 Liquid-Level Gauges for Anhydrous Ammonia and LP-Gas (with revisions
through February 23, 2018)
Fuel Gas
UL 569-2013 Pigtails and Flexible Hose Connectors for LP-Gas (with revisions through July
28, 2017)
Fuel Gas
UL 732-2018 Oil-Fired Storage Tank Water Heaters (with revisions through August 9, 2018) Fuel Gas, Appliances
UL 733-1993 Oil-Fired Air Heaters and Direct-Fired Heaters (with revisions through
October 9, 2013)
Water Heaters, Direct
Fired, Oil Fired
UL 842-2015 Valves for Flammable Fluids (with revisions through October 27, 2017) Valves
UL 984-1996 Hermetic Refrigerant Motor-Compressors (with revisions through September
23, 2005)
Compressors, Refrigera-
tion
UL 1453-2016 Electric Booster and Commercial Storage Tank Water Heaters (with revisions
through May 18, 2018)
Appliances
UL 1746-2007 External Corrosion Protection Systems for Steel Underground Storage Tanks
(with revisions through December 19, 2014)
Tanks

344 2022 CALIFORNIA MECHANICAL CODE

REFERENCED STANDARDS

ABBREVIATIONS IN TABLE 1701.1 AND TABLE 1701.2

AABC Associated Air Balance Council, 1220 19th Street NW, Suite 410, Washington, DC 20036. ACCA Air Conditioning Contractors of America Association, Inc., 2800 S Shirlington Road, Suite 300, Arlington, VA 22206. AHRI Air-Conditioning, Heating, and Refrigeration Institute, 2311 Wilson Boulevard, Suite 400, Arlington, VA 22201. AMCA Air Movement and Control Association, 30 West University Drive, Arlington Heights, IL 60004-1806. ANSI American National Standards Institute, Inc., 25 W. 43rd Street, 4th Floor, New York, NY 10036. ASCE American Society of Civil Engineers, 1801 Alexander Bell Drive, Reston, VA 20191-4400. ASHRAE American Society of Heating, Refrigerating, and Air Conditioning Engineers, Inc., 1791 Tullie Circle, NE, Atlanta, GA 30329-2305. ASME American Society of Mechanical Engineering, Two Park Avenue, New York, NY 10016-5990. ASSE American Society of Sanitary Engineering, 18927 Hickory Creek Drive, Suite 220, Mokena, IL 60448. ASTM ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. AWS American Welding Society, 8669 NW 36 Street, #130, Miami, FL 33166-6672. AWWA American Water Works Association, 6666 W. Quincy Avenue, Denver, CO 80235. CFR Code of Federal Regulations, U.S Government Publishing Office, 723 North Capitol Street, N.W. Washington, DC 20401-001. CGA Canadian Gas Association, 243 Consumers Road, Suite 1200, North York, Ontario, Canada M2J 5E3. CSA Canadian Standards Association, 178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3.

e1 An editorial change since the last revision or reapproval.

IAPMO International Association of Plumbing and Mechanical Officials, 4755 E. Philadelphia Street, Ontario, CA 91761. IES Illuminating Engineering Society, 120 Wall St. Fl 17, New York, NY 10005-4026. IGSHPA International Ground Source Heat Pump Association, 1723 W. Tyler Ave. Stillwater, OK 74078. IIAR International Institute of Ammonia Refrigeration, 1001 N. Fairfax Street, Suite 503, Alexandria, VA 22314. ISO International Organization for Standardization, 1 ch. de la Voie-Creuse, Casa Postale 56, CH-1211 Geneva 20, Switzerland. MSS Manufacturers Standardization Society of the Valve and Fittings Industry, 127 Park Street NE, Vienna, VA 22180. NEBB National Environmental Balancing Bureau, 8575 Grovemont Circle, Gaithersburg, MD 20877. NFPA National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02169-7471. NGWA National Ground Water Association, 601 Dempsey Road, Westerville, Ohio 43081-8978. NSF NSF International, 789 N. Dixboro Road, Ann Arbor, MI 48105. SAE Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096. SMACNA Sheet Metal and Air Conditioning Contractors National Association, 4201 Lafayette Center Drive, Chantilly, VA 20151-1219. UL Underwriters Laboratories, Inc., 333 Pfingsten Road, Northbrook, IL 60062.

2022 CALIFORNIA MECHANICAL CODE 345

346 2022 CALIFORNIA MECHANICAL CODE

APPENDICES

The appendices are intended to supplement the provisions of the installation requirements of this code. The definitions in Chapter 2 are also applicable to the appendices.

TABLE OF CONTENTS

Appendix A Page

Appendix B

Appendix C

Appendix D

Appendix E

Appendix F

Appendix G

Appendix H

2022 CALIFORNIA MECHANICAL CODE 347

348 2022 CALIFORNIA MECHANICAL CODE

CALIFORNIA MECHANICAL CODE – MATRIX ADOPTION TABLE

Get a plain-English answer with a citation back to this text.

Ask AI about this code
Contents — California Mechanical Code (Title 24, Part 4)

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.