Section A501

A501.1 General. See Table A501.1 for standards that are¶

referenced in various sections of this appendix. Standards are listed by the standard identification with the effective date, standard title, and the section or sections of this appendix that references the standard.

Copyright © 2022 by, or licensed to, International Code Council, Inc. (ALL RIGHTS RESERVED); licensed to California Building Standards Commission pursuant to License Agreement. No further reproductions is authorized. Any unauthorized reproduction or distribution is a violation of the federal copyright act and the license agreement, and subject to civil and criminal penalties thereunder.

APPENDIX A—GUIDELINES FOR THE SEISMIC RETROFIT OF EXISTING BUILDINGS

	TABLE A501.1 REFERENCED STANDARDS
STANDARD ACRONYM	STANDARD NAME	SECTIONS HEREIN REFERENCED
AISC 341-16	Seismic Provisions for Structural Steel Buildings	A403.10.1, A403.10.2
ASCE/SEI 7 —16	Minimum Design Loads for Buildings and Other Structures with Supplement No. 1	A104.1, A205.1, A206.1, A206.2, A206.3, A206.4, A206.7, A403.3
ASTM A36/A36M— 14	Specification for Carbon Structural Steel	A405.3.3
ASTM A653/A653M —15	Standard Specification for Steel Sheet, Zinc Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by Hot-Dip Process	A304.2.6
ASTM B695 —04(2009)	Standard Specification for Coating of Zinc Mechanically Deposited on Iron and Steel	A304.2.6
ASTM C67- 14	Test Methods of Sampling and Testing Brick and Structural Clay Tile	A106.2.3.1
ASTM C140/C140M —15	Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units	A106.2.3.1
ASTM C496 —96/ C496M —11	Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens	A104.1, A106.2.3.3
ASTM C1531—15	Standard Test Methods for In Situ Measurement of Masonry Mortar Joint Shear Strength Index	A106.2.3.2
ASTM E488/E488M —15	Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements	A107.5.1, A107.5.3
ASTM E519/ E519M —2010	Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages	A104.1
CBC—01	California Building Code	A202.1
CBC—07	California Building Code	A202.1
CBC—10	California Building Code	A202.1
CBC—13	California Building Code	A202.1
CBC—16	California Building Code	A202.1
CBC—19	California Building Code	A202.1
CBC—22	California Building Code	A102.2, A105.1, A105.4, A202.1, A203.1, A204.1, A205.1, A205.3, A205.3.1, A205.4, A301.3, A304.1.1, A403.1, A405.1, A407.1, A407.2, A407.3
UBC—97	Uniform Building Code	A202.1

APPENDIX A-50 2022 CALIFORNIA EXISTING BUILDING CODE

CALIFORNIA EXISTING BUILDING CODE – MATRIX ADOPTION TABLE

APPENDIX B SUPPLEMENTARY ACCESSIBILITY REQUIREMENTS

FOR EXISTING BUILDINGS AND FACILITIES

Not adopted by the State of California (May be available for adoption by local ordinance. See Section 1.1.11.)

Adopting Agency	BSC	BSC- CG	SFM	HCD			DSA			OSHPD						BSCC	DPH	AGR	DWR	CEC	CA	SL	SLC
Adopting Agency	BSC	BSC- CG	SFM	1	2	1/AC	AC	SS	SS/CC	1	1R	2	3	4	5	5	5	5	5	5	5	5	5
Adopt Entire Chapter
Adopt Entire Chapter as amended (amended sections listed below)
Adopt only those sections that are listed below
Chapter / Section

The state agency does not adopt sections identified with the following symbol: The Office of the State Fire Marshal’s adoption of this chapter or individual sections is applicable to structures regulated by other state agencies pursuant to Section 1.11.

APPENDIX B-2 2022 CALIFORNIA EXISTING BUILDING CODE

APPENDIX B

SUPPLEMENTARY ACCESSIBILITY REQUIREMENTS

FOR EXISTING BUILDINGS AND FACILITIES

The provisions contained in this appendix are not mandatory unless specifically referenced in the adopting ordinance.

User note:

About this appendix: Chapter 11 of the International Building Code ^® contains provisions that set forth requirements for accessibility to build- ings and their associated sites and facilities for people with physical disabilities. Sections 306 and 1508 in the code address accessibility pro- visions and alternatives permitted in existing buildings. Appendix B was added to address accessibility in construction for items that are not typically enforceable through the traditional building code enforcement process.