Skip to content
ChatProjectCodes

Chapter 16 — REFERENCED STANDARDS

Section A105

California Existing Building Code (Title 24, Part 10) · 2019 edition · updated 2026-09-10 · California

Italicized text is a California amendment to the model code, as printed in the official publication.

GENERAL REQUIREMENTS

[BS] A105.1 General. The seismic force-resisting system specified in this chapter shall comply with the California Building Code and referenced standards, except as modified herein.

[BS] A105.2 Alterations and repairs. Alterations and repairs required to meet the provisions of this chapter shall comply with applicable structural requirements of the building code unless specifically provided for in this chapter.

Copyright © 2019 ICC. ALL RIGHTS RESERVED. Accessed by Kevin Day (kevin.day@dgs.ca.gov), (California Building Standards Commission) Order Number #100735044 on Jul 24, 2019 03:54 PM (PDT) pursuant to License Agreement with ICC. No further reproduction or distribution authorized. Single user only, copying and networking prohibited. ANY UNAUTHORIZED REPRODUCTION OR DISTRIBUTION IS A VIOLATION OF THE FEDERAL COPYRIGHT ACT AND THE LICENSE AGREEMENT, AND SUBJECT TO CIVIL AND CRIMINAL PENALTIES THEREUNDER.

100735044

APPENDIX A

[BS] A105.3 Requirements for plans. The following construction information shall be included in the plans required by this chapter:

  1. Dimensioned floor and roof plans showing existing walls and the size and spacing of floor and roof-framing members and sheathing materials. The plans shall indicate all existing URM walls, and new crosswalls and shear walls, and their materials of construction. The location of these walls and their openings shall be fully dimensioned and drawn to scale on the plans.

  2. Dimensioned URM wall elevations showing openings, piers, wall classes as defined in Section A106.2.3.8, thickness, heights, wall shear test locations, cracks or damaged portions requiring repairs, the general condition of the mortar joints, and if and where pointing is required. Where the exterior face is veneer, the type of veneer, its thickness and its bonding and/or ties to the structural wall masonry shall be noted.

  3. The type of interior wall and ceiling materials, and framing.

  4. The extent and type of existing wall anchorage to floors and roof where used in the design.

  5. The extent and type of parapet corrections that were previously performed, if any.

  6. Repair details, if any, of cracked or damaged unreinforced masonry walls required to resist forces specified in this chapter.

  7. All other plans, sections and details necessary to delineate required retrofit construction.

  8. The design procedure used shall be stated on both the plans and the permit application.

  9. Details of the anchor prequalification program required by Section A107.5.3, if used, including location and results of all tests.

  10. Quality assurance requirements of special inspection for all new construction materials and for retrofit construction including: anchor tests, pointing or repointing of mortar joints, installation of adhesive or mechanical anchors, and other elements as deemed necessary to ensure compliance with this chapter.

[BS] A105.4 Structural observation, testing and inspec- tion. Structural observation, in accordance with Section 1704 of the California Building Code, shall be required for all structures in which seismic retrofit is being performed in accordance with this chapter. Structural observation shall include visual observation of work for compliance with the approved construction documents and confirmation of existing conditions assumed during design.

Structural testing and inspection for new and existing construction materials shall be in accordance with the building code, except as modified by this chapter.

Special inspection as described in Section A105.3, Item 10, shall be provided equivalent to Level 3 as prescribed in TMS 402, Table 3.1(2).

Get a plain-English answer with a citation back to this text.

Ask AI about this code
Export this section
▸Contents — California Existing Building Code (Title 24, Part 10)
California Existing Building Code (Title 24, Part 10)
  1. Chapter 2 — DEFINITIONS
  2. Appendix A — GUIDELINES FOR
  3. Appendix B — SUPPLEMENTARY
  4. Appendix C — GUIDELINES FOR THE
  5. Chapter 1 — SCOPE AND ADMINISTRATION
  6. Chapter 3 — PROVISIONS FOR ALL COMPLIANCE METHODS
  7. Chapter 4 — REPAIRS
  8. Chapter 5 — PRESCRIPTIVE COMPLIANCE METHOD
  9. Chapter 6 — CLASSIFICATION OF WORK
  10. Chapter 7 — ALTERATIONS - LEVEL 1
  11. Chapter 8 — ALTERATIONS - LEVEL 2
  12. Chapter 9 — ALTERATIONS - LEVEL 3
  13. Chapter 10 — CHANGE OF OCCUPANCY
  14. Chapter 11 — ADDITIONS
  15. Chapter 12 — HISTORIC BUILDINGS
  16. Chapter 13 — PERFORMANCE COMPLIANCE METHODS
  17. Chapter 14 — RELOCATED OR MOVED BUILDINGS
  18. Chapter 15 — CONSTRUCTION SAFEGUARDS
  19. ▸Chapter 16 — REFERENCED STANDARDS
    Overview
    1. Section A100
    2. Section A101
    3. Section A102
    4. Section A103
    5. Section A104
    6. Section A105
    7. Section A106
    8. Section A107
    9. Section A108
    10. Section A109
    11. Section A110
    12. Section A111
    13. Section A112
    14. Section A113
    15. Section A114
    16. Section A201
    17. Section A205
    18. Section A202
    19. Section A203
    20. Section A204
    21. Section A206
    22. Section A207
    23. Section A301
    24. Section A302
    25. Section A303
    26. Section A304
    27. Section A401
    28. Section A402
    29. Section A403
    30. Section A404
    31. Section A405
    32. Section A406
    33. Section A407
    34. Section B101
    35. Section B102
    36. Section B103
    37. Section B104
    38. Section C101
    39. Section C102
    40. Section C103
    41. Section C104
    42. Section C201
    43. Section C202

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.