§ 25.80 COMMERCIAL LOT STANDARDS.

Red Bluff Zoning Code · 2026-06 edition · ingested 2026-07-06 · Red Bluff

The following is a list of commercial lot standards.

Item C-1 C-2 C-3 FC HC
Item C-1 C-2 C-3 FC HC
Setbacks (Minimum in feet):
Front yard 5 5 5 10 None
Side yard None(8) None(8) None(8) None(8) None(8)
Street side yard 5 5 5 10 None
Rear yard 5(1) 5(1) 5(1) 10 (1)
Lot area (Minimum in square feet):
Normal lot 6,000 6,000 6,000 6,000 2,875
Corner lot 7,000 7,000 7,000 7,000 2,875
Lot dimensions (Minimum in feet):
Normal lot width 60 60 60 60 25
Corner lot width 70 70 70 70 25
Lot depth 100 100 100 100 115
Cul-de-sac frontage 40 40 40 40 NA
Miscellaneous:
Parking (Minimum) and loading (2) (2) (2) (2) (2)
Building coverage (Maximum) 45% 55% 60% 60% 100%
Surfaced area (Maximum) 75% 80% 85% 80% 100%
Landscaped area (Minimum) (6) (6) (6) (6) (3)
Density (Maximum in acres) 20(4) 20(4) 20(4) 20(4) (5)
Maximum height (in feet) 35(7) 50(7) 60(7) 50(7) 50(7)
NOTES TO TABLE:
1. Rear yard shall be a ten-foot minimum where accessible from street, alley or parking lot for loading purposes. Building may project
over rear yard provided that ten feet of clear vertical distance from ground level is maintained.
2. Parking and loading requirements are use driven, see Article XXIII.
3. Adjacent street landscaping consistent with Historic Design Review Guidelines and Downtown Demonstration Project.
4. Residential use requires use permit; see § 25.79, or PD use permit per § 25.137.
  1. Residences require use permit per § 25.79, or PD use permit per § 25.137. For existing buildings, density not to exceed 40 dwelling units/acre. For new buildings, density not to exceed 20 dwelling units/acre. 6. At a minimum, front and street side yards shall be landscaped. Parking areas shall provide landscaping and shading per § 25.221. 7. See also § 25.187 for height exceptions. 8. Except as required by the Uniform Building Code or State Historic Building Code.

(`61 Code, § 25.08.40) (Ord. 915, passed 6-20-2000; Am. Ord. 930, passed 7-3-2001)

ARTICLE IX: INDUSTRIAL DISTRICTS

Section

25.82 Generally

25.83 M—1, light industrial districts

25.84 M—2, general industrial districts

25.85 P-I, planned industrial districts

25.86 Lot standards

25.87 Parking

  • 25.88 Setback and height requirements

  • 25.89 Landscape standards

25.90 Signage

  • 25.91 Compliance with design review guidelines

  • 25.92 Industrial zones and permit requirements

  • 25.93 Industrial lot standards