Skip to content

Chapter 6C — ELECTRIC RATES›Article 6C — I TERMS AND CONDITIONS FOR THE SALE OF ELECTRIC SERVICES

Needles Municipal Code § 6.1 Customer equipment

Needles Municipal Code · 2026-09 edition · updated 2026-10-04 · Needles

Cite as: Needles Municipal Code § 6.1 · Text as of 2026-10-04

Customer shall install and maintain all wiring and equipment beyond the point

of delivery. Except for City’s meters and special equipment, Customer’s entire installation must conform to all applicable construction standards and safety codes, and if an inspection or permit is required by law or by City, the same must be furnished by Customer.

6.1.1 Customer shall provide in accordance with City’s current service standards, at no…

City, and close to the point of delivery, a sufficient and suitable space acceptable to City’s representative for the installation of City’s metering equipment.

Exceptions & meaning →

6.1.2 Customer shall provide and maintain a clear and unobstructed work space that…

minimum radius of three feet from the face of the electrical entrance section, and a clear and unobstructed walkway to the meter location of a minimum width of three feet. The electric entrance section work space shall have a level floor surface and a height minimum of six feet six inches to any overhead obstruction.

Exceptions & meaning →

6.1.3 Customer shall, at his/her own expense, relocate meter or meters to a new and…

location whenever the existing meter or meters become inaccessible or work space cannot be maintained.

Exceptions & meaning →

Get a plain-English answer with a citation back to this text.

Ask AI about this code
▸Contents — Needles Municipal Code

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.