505C.3 Requirements for Plans.

505C.3 Requirements for Plans. In addition to the requirements of San Francisco Building Code Section 106A.3.3 of this code, the following construction information shall be included in the plans required by this chapter:

1. Dimensioned floor and roof plans showing existing walls and the size and spacing of floor and roof framing members and sheathing materials. The plans shall indicate all existing and new crosswalls and shear walls and their materials of construction. The location of these walls and their openings shall be fully dimensioned and drawn to scale on the plans.

2. Dimensioned wall elevations showing openings, piers, wall classes as defined in Section 506C.3.3.6, thickness, heights, wall shear test locations, and cracks or damaged portions requiring repairs. Where the exterior face is veneer, the type of veneer, its thickness and its bonding and/or ties to the structural wall masonry shall also be noted.

3. The type of interior wall and ceiling materials and framing.

4. The extent and type of existing wall anchorage to floors and roof when used in the design.

5. The extent and type of parapet and appendage corrections which were previously performed, if any.

6. Repair details, if any, of cracked or damaged unreinforced masonry wall walls required to resist forces specified in this chapter.

7. All other plans, sections and details necessary to delineate required retrofit construction.

8. The design procedure used shall be stated on both the plans and the permit application.

9. Details of the anchor prequalification program required by Section 515C, if utilized, including location and results of all tests.

10. In buildings with party walls, the details of construction on both sides of each party wall shall be shown. Where required by Section 511C.1, It em 5 the owners’ consent statements shall be included with the plans.