411.5 Specific Location Requirements.
San Francisco Building Inspection Commission Codes · edición 2022 · actualizado 2026-07-08 · San Francisco
Esta sección aún no está traducida y se muestra en inglés.
411.5 Specific Location Requirements.
(A) Walls, Floors and Ceilings. Conductors concealed or extended through a wall, floor, ceiling, or suspended ceiling shall be in accordance with (1) or (2):
(1) Installed using any of the wiring methods specified in Chapter 3
(2) Installed using wiring supplied by a listed Class 2 power source and installed in accordance with 725.130.
Chapter 5. S ecial Occu ancies p p
No San Francisco Electrical Code Amendments.
Chapter 6. S ecial E ui ment p q p
No San Francisco Electrical Code Amendments.
Chapter 7. S ecial Conditions p
ARTICLE 700 – EMERGENCY SYSTEMS
700.12(I)(2) Revise item (2) and (5) of this section as follows:
700.12(I)(2) Installation of Unit Equipment. Unit equipment shall be installed in accordance with the following:
(2) Unit equipment shall be permanently fixed (i.e., not portable) in place and shall have all wiring to each unit installed in accordance with the requirements of any of the wiring methods in Chapter 3. Flexible cord-and-plug connection shall not be permitted [ ← ] .
(5) Emergency luminaires (illumination fixtures) that obtain power from a unit equipment and are not part of the unit equipment shall be wired to the unit equipment as required by 700.10 and by one of the wiring methods of Chapter 3.
700.16(A) Revise this section as follows:
700.16(A) Emergency Illumination. Emergency illumination shall include means of egress lighting, illuminated exit signs, and all other luminaires specified as necessary to provide required illumination. Emergency illumination shall be provided at the location of transfer switches, switchboards and panelboards that supply emergency and legally required stand-by loads.