Sec. 21-35. - Permits.

State law requires the water purveyor to obtain a permit before furnishing water to a user. Permits are issued on small water systems (less than two hundred connections) by the county public health department. In order to obtain adequate data, all or part of the following information when related to the proposed water supply system may be required before an application for a water supply permit will be accepted for processing:

(a)

A plot plan of all wells indicating property boundary lines and the location of all possible sources of contamination, including sewer or waste lines, septic tanks, dry wells, cesspools, or seepage pits or any surface or subsurface sewage or sewage effluent discharge that is located within two hundred feet of the well.

(b)

Means of protecting well sites by restrictions or by the purchasing of surrounding property to prevent the location of future possible sources of contamination in the vicinity of the well.

(c)

The logs of all wells and well construction plans, including depth of annular seal, casings, perforations, bacteriological sampling cock, and facilities for disinfection of the well if necessary.

(d)

Report by a registered geologist, certified hydro-geologist or certifies engineering geologist that the underground water basin is of sufficient quantity to supply the development to be served by the wells.

(e)

Complete chemical analysis, including nitrates, and analysis for any other chemical suspected to be present, of the water supply from each well in a laboratory approved by the state department of public health.

(f)

Information on the bacteriological quality of the water supply from each source.

(g)

Complete plans and specifications for the water works system, including storage facilities.

(h)

Certificate by a registered civil engineer that the sources, distribution works, and storage are adequate to serve the proposed development.

(i)

A certificate from a registered engineer that the size of the water lines is adequate to serve the subdivision.

(j)

Methods that will be used to disinfect new and repaired lines.

(k)

Outline of the cross-connection control program to be maintained.

(l)

Method of treatment and complete plans on treatment facilities.

(m)

Map of the service area and an indication of the number of services to be installed.

(Ord. No. 1722, pt. 6, § 2: Ord. No. 4436, § 20)