Skip to content

Article III — ZONES, USES AND REQUIREMENTS›Division 11 — INDUSTRIAL ZONES

SEC. 16-169. INDUSTRIAL ACCESSORY USES: PURPOSE AND INTENT.

Oxnard Zoning Code · 2026-06 edition · updated 2026-09-23 · Oxnard

The purpose of the following sections is to provide guidance and regulation concerning activities associated with industrial or manufacturing uses, which by their nature could be considered permitted or principal uses in other zones, but which are typically incidental to the principal industrial use.

(Ord. No. 2958, 2985)

Get a plain-English answer with a citation back to this text.

Ask AI about this code
▸Contents — Oxnard Zoning Code
Oxnard Zoning Code
  1. Article I — GENERAL PROVISIONS
  2. Article II — DEFINITIONS
  3. ▸Article III — ZONES, USES AND REQUIREMENTS
  4. Article IV — STANDARDS FOR ALL ZONES
  5. Article V — SPECIFIC USE REQUIREMENTS
  6. Article VI — NONCONFORMING USES
  7. Article VII — PERMIT PROCEDURES
  8. Article VIII — CHANGE OF BOUNDARIES AND USES
  9. Article IX — ADVERTISING SIGNS
  10. Article X — OFF-STREET PARKING
  11. Article XI — SHORT-TERM RENTAL UNITS

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.