SEC. 16-161. PERMIT REQUIREMENTS FOR INDUSTRIAL USES.

The required permit for a respective industrial land use is indicated in section 16-163, industrial land use matrix. The permit requirements are as provided for in this chapter and as further provided for below.

(A) Special use permit (SUP). The permit application requirements and process for a Special use permit are set forth in Article VII, Division 3, of this chapter.

(B) Development design review (DDR) permit. The permit application requirements and process for development design review permit are set forth in Article VII, Division 2, of this chapter.

(1) A DDR permit may be required for either the review and approval of the construction of a new industrial building, and/or the review and approval of a use which requires administrative review to Ensure compliance with the provisions of this chapter and other regulatory requirements.

(2) For the review of uses proposed to be located in existing structures, the director may determine the level of information and plans required.

(C) Minor modifications. Where a planning permit such as a special use permit, planned development permit, or development design review permit has been previously approved, the city may elect to modify that existing permit in lieu of requiring the application and approval of a new special use or development design review permit for a proposed physical modification or use clearance, provided such physical modification is within the parameters for minor modifications provided for in this chapter or by administrative policy.

(D) Permitted uses: zone clearance. Permitted uses are subject to the requirement for approval of a zone clearance in accordance with this chapter.

(E) Specific plan permit requirements. For development in areas within a designated specific plan, the following table identifies the permit processing requirements.

(Ord. No. 2958, 2985)