Skip to content

Article III — ZONES, USES AND REQUIREMENTS›Division 11 — INDUSTRIAL ZONES

SEC. 16-166. PERFORMANCE STANDARDS; GENERAL.

Oxnard Zoning Code · 2026-06 edition · updated 2026-09-23 · Oxnard

(A) All uses in the industrial zones are subject to performance standards as indicated below in section 16-168.

(B) The property owner (designee) shall ensure compliance with the performance standards, with the exception of adult businesses referred to in section 16-163, except as an approved permit may warrant, and/or except as otherwise provided for in this division or other section.

(C) More restrictive performance standards or regulations enacted by an authorized governmental or regulatory agency having jurisdiction of such matters shall take precedence over the provisions of these regulations. (Ord. No. 2958, 2985)

Get a plain-English answer with a citation back to this text.

Ask AI about this code
▸Contents — Oxnard Zoning Code
Oxnard Zoning Code
  1. Article I — GENERAL PROVISIONS
  2. Article II — DEFINITIONS
  3. ▸Article III — ZONES, USES AND REQUIREMENTS
  4. Article IV — STANDARDS FOR ALL ZONES
  5. Article V — SPECIFIC USE REQUIREMENTS
  6. Article VI — NONCONFORMING USES
  7. Article VII — PERMIT PROCEDURES
  8. Article VIII — CHANGE OF BOUNDARIES AND USES
  9. Article IX — ADVERTISING SIGNS
  10. Article X — OFF-STREET PARKING
  11. Article XI — SHORT-TERM RENTAL UNITS

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.