Chapter 17.19 — R-2-A MEDIUM DENSITY MULTIPLE-FAMILY RESIDENTIAL DISTRICT, ONE STORY

The R-2-A district is intended to provide for medium density multifamily structures, limited to one story in height, for the purposes of rental or sale to permanent occupants. Single family units are a permitted use and may be constructed with two stories consistent with provisions of the R-1-6 district.

(Ord. No. 373, § 10, 10-15-2015)

In the R-2-A district, uses permitted are:

A.

Uses permitted in the R-2 district, Section 17.18.020, shall apply.

(Ord. No. 373, § 10, 10-15-2015)

In the R-2-A district, uses permitted subject to conditional use permit are: uses listed in the R-2 district, Section 17.18.030, shall apply.

(Ord. No. 373, § 10, 10-15-2015)

In the R-2-A district, uses expressly prohibited are:

A.

The uses listed as uses expressly prohibited in the R-2 district, Section 17.18.040

B.

Any multifamily dwelling structure exceeding one story or twenty feet in height.

(Ord. No. 373, § 10, 10-15-2015)

A.

The provisions of the R-2 district, Sections 17.18.050 through 17.18.180 shall apply, excepting Section

B.

Building Height.

Multifamily structures erected in this district shall not exceed one story, or twenty feet in height.

Single family structures erected in this district shall not exceed two stories, or thirty feet in height.

Accessory buildings erected in this district shall not exceed one story, or twelve feet to plate height.

(Ord. No. 373, § 10, 10-15-2015)

All uses shall be subject to the general provisions and exceptions prescribed in Chapters 17.52 through 17.64.

(Ord. No. 373, § 10, 10-15-2015)

Before any building or structure, with the exception of a one-family dwelling, is erected on any lot in the R- 2-A district, a site plan pursuant to Chapter 17.56 of this code shall have been submitted to and approved by the city manager, or his designee.

(Ord. No. 373, § 10, 10-15-2015)