Skip to content

Division 5 — FLOOD HAZARD VARIANCE PROCEDURES›Article VI

32-24 M-30 MULTIFAMILY RESIDENTIAL DISTRICT.

Danville Zoning Code · 2026-07 edition · updated 2026-07-09 · Danville

32-24.1 Purpose.

The purpose of the M-30 Multifamily Residential District is to:

a. Create development standards appropriate for compact, high density, multifamily residential development including apartments, townhouses, or condominium living.

b. Assure that future development compliments Danville's existing small town character and established quality of life.

c. Integrate new development in a manner that is visually and functionally compatible with the physical character of the surrounding community.

d. Minimize the impacts of uses, protect residents from the harmful effects of excessive noise, overcrowding, excessive traffic, insufficient parking and other adverse environmental effects.

e. Ensure adequate provisions for sites, with reasonable access to public services, for appropriate public and semipublic land uses, including care facilities, needed to complement residential development or that require a residential environment. At the same time, protect the relatively quiet, primarily noncommercial, family atmosphere of neighborhoods.

f. Be consistent with the Danville General Plan Multifamily High Density (twenty-five through thirty (25-30) dwelling units per acre) land use designation and to replace the previous M-29; Multifamily Residential District.

(Ord. #2023-07, § 4)

32-24.2 Definitions.

Words and phrases as used in this section shall be as defined under Section 32-22.2.

(Ord. #2023-07, § 4)

32-24.3 Uses and Development Standards.

a. Conform to M-35 District, Section 32-29. Except as specified, the M-30 District shall comply with all of the provisions established under the M-35 Multifamily District.

b. Differences from the M-35 District. The following items for the M-30 district are different from those for the M-35 district.

  1. Maximum Unit Density. The maximum residential density allowed in this district is thirty (30) dwelling units per acre.

  2. Minimum Unit Density. The minimum residential density allowed in this district is twenty-five (25) dwelling units per acre.

(Ord. #2024-01, § 7)

Get a plain-English answer with a citation back to this text.

Ask AI about this code
▸ Contents — Danville Zoning Code
Danville Zoning Code
  1. Chapter I
  2. Chapter II
  3. Chapter III
  4. Chapter IV
  5. Chapter V
  6. Part 1 — GENERAL
  7. Part 2 — CARDROOM LICENSES
  8. Part 3 — CARDROOM RESTRICTIONS
  9. Part 5 — SUSPENSION, REVOCATION, CHANGE AND VARIANCE
  10. Part 1
  11. Part 2
  12. Part 3
  13. Part 4
  14. Part 1
  15. Division 1 — FORM AND CONTENTS
  16. Division 2 — SUPPLEMENTARY DOCUMENTS
  17. Division 3 — CHECKING
  18. Division 4 — APPROVAL
  19. Division 1
  20. Division 3
  21. Division 4
  22. Division 1 — INTRODUCTION
  23. Division 2 — SPECIFIC USES AND DEFINITIONS
  24. Division 3 — DEVELOPMENT STANDARDS
  25. Division 4 — PARKING STANDARDS
  26. Division 5 — DEVELOPMENT PLAN REVIEW PROCEDURES
  27. Division 1 — GENERAL
  28. Division 2 — REQUIREMENTS AND STANDARDS
  29. Division 3 — CREDIT; EXEMPTIONS
  30. Division 4 — DISPOSITION OF FEES AND LAND
  31. Division 5 — PROCEDURES
  32. Division 1 — GENERAL
  33. Division 3 — ENFORCEMENT REGULATIONS
  34. Division 1 — NONRESIDENTIAL CONSTRUCTION
  35. Division 2 — RESIDENTIAL CONSTRUCTION
  36. Division 1 — GENERAL PROVISIONS
  37. Division 2 — APPLICATIONS
  38. Division 3 — ADMINISTRATION
  39. Division 4 — PROVISIONS FOR FLOOD HAZARD REDUCTION
  40. ▸ Division 5 — FLOOD HAZARD VARIANCE PROCEDURES
    Overview
    1. Article XVII — NATIONAL POLLUTANT DISCHARGE ELIMINATION SYSTEM
    2. Article XVIII — USE AND LIMITS
    3. Article XIX — HAZARDOUS WASTE MANAGEMENT PLAN
    4. Article IV — DECISION MAKING AUTHORITY AND REVIEW PROCESS
    5. Article V
    6. ▸ Article VI
      Overview
      1. 32-22 SINGLE FAMILY RESIDENTIAL DISTRICTS.
      2. 32-23 D-1 TWO FAMILY DISTRICT.
      3. 32-24 M-30 MULTIFAMILY RESIDENTIAL DISTRICT.
      4. 32-25 M-25 MULTIFAMILY RESIDENTIAL DISTRICT.
      5. 32-26 M-20 MULTIFAMILY RESIDENTIAL DISTRICT.
      6. 32-27 M-13 MULTIFAMILY RESIDENTIAL DISTRICT.
      7. 32-28 M-8 MULTIFAMILY RESIDENTIAL DISTRICT.
      8. 32-29 M-35 MULTIFAMILY RESIDENTIAL DISTRICT.
      9. 32-37 A-2 GENERAL AGRICULTURAL DISTRICT.
      10. 32-38 A-4 AGRICULTURAL PRESERVE DISTRICT.
      11. 32-45 DOWNTOWN BUSINESS DISTRICT. [ ]
  41. Division 2
  42. Division 5
  43. Division 2 — REQUIREMENTS AND STANDARDS
  44. Division 4
  45. Division 5
  46. Division 2
  47. Division 1
  48. Division 2

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.