Chino Municipal Code Ch. 15.12 International Property Maintenance Code

There is hereby adopted by reference the International Property Maintenance Code, 2024 Edition. That certain document, three copies of which are on file with the city of Chino, being marked and designated as the International Property Maintenance Code, 2024 Edition, sponsored by the International Code Council, is adopted as the International Property Maintenance Code of minimum requirements of residential buildings and providing for enforcement thereof and penalties for violations of such code, and each and all the regulations, provisions, penalties, conditions and terms of such International Property Maintenance Code, 2024 Edition, are referred to, adopted and made a part hereof as though fully set forth in this chapter.

(Ord. No. 2025-007, § 2, 2025.)

The International Property Maintenance Code adopted by Section 15.12.010, is amended as set out in this chapter.

(Ord. No. 2025-007, § 2, 2025.)

Section 101.1 of the International Property Maintenance Code is amended as follows:

101.1 Title. These regulations shall be known as the International Property Maintenance Code of the city of Chino, herein referred to as "this code."

(Ord. No. 2025-007, § 2, 2025.)

Section 103.5 of the International Property Maintenance Code is amended as follows:

103.5 Fees. The fees for activities and services performed by the City of Chino in carrying out its responsibilities under this code shall be indicated in the most current adopted User Fee Schedule.

(Ord. No. 2025-007, § 2, 2025.)

Section 110.4 of the International Property Maintenance Code is amended as follows:

110.4 Failure to comply. Any person who shall continue any work after having been served with a stop work order, except such work as that person is directed to perform to remove a violation or unsafe condition, shall be subject to administrative citations as set forth in section 1.15 of the Chino Municipal Code, or any successor ordinance.

(Ord. No. 2025-007, § 2, 2025.)

Section 303 of the International Property Maintenance Code is deleted.

(Ord. No. 2025-007, § 2, 2025.)

Section 304.14 of the International Property Maintenance Code is amended to read as follows:

304.14 Insect screens. At all times, every door, window and other outside opening required for ventilation of habitable rooms, food preparation areas, or any areas where products to be included or utilized in food for human consumption are processed, manufactured, packaged or stored shall be supplied with approved tightly fitting screens of minimum sixteen mesh per inch and every screen door used for insect control shall have a self-closing device in good working condition.

(Ord. No. 2025-007, § 2, 2025.)

Section 602.3 of the International Property Maintenance Code is amended to read as follows:

602.3 Heat supply. Every owner and operator of any building who occupies, rents, leases, or lets one or more dwelling units or sleeping units on terms, either expressed or implied, to furnish heat to the occupants at all times to maintain a minimum temperature of sixty-eight degrees F in all habitable rooms, bathrooms and toilet rooms.

(Ord. No. 2025-007, § 2, 2025.)

Section 602.4 of the International Property Maintenance Code is deleted.

(Ord. No. 2025-007, § 2, 2025.)