Skip to content

Appendix AT — SOLAR-READY PROVISIONS—DETACHED ONE- AND

Section AW105

California Residential Code (Title 24, Part 2.5) · 2022 edition · updated 2026-09-12 · California

Italicized text is a California amendment to the model code, as printed in the official publication.

AW105.1 Initial inspection.

An initial inspection of the production equipment, including 3D printer, and the fabrication process shall be performed after the production equipment is located on site and before building fabrication has begun. The inspection shall be conducted by representatives of the approved agency that evaluated the fabrication process for compliance with UL 3401. The inspection shall verify that the fabrication process, including production equipment, 3D-printing parameters and additive manufacturing materials, are in accordance with the UL 3401 report of findings and the proprietary information in the UL 3401 detailed report of findings.

Exception: Where approved by the building official, inspections of the production equipment, including 3D printer, and the fabrication process used in a single housing tract shall be conducted on the first building to be constructed, and on a selected number of subsequent buildings, where the same equipment, equipment operators and fabrication process are used on all buildings. The number of inspections to be performed shall be determined by the building official.

Get a plain-English answer with a citation back to this text.

Ask AI about this code
Contents — California Residential Code (Title 24, Part 2.5)

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.