Skip to content
ChatProjectCodes

Appendix A4

Section A4.405

California Green Building Standards Code (Title 24, Part 11) · 2022 edition · updated 2026-09-12 · California

MATERIAL SOURCES A4.405.1 Prefinished building materials. Utilize prefinished building materials which do not require additional painting or staining when possible. One or more of the following building materials that do not require additional resources for finishing are used:

  1. Exterior trim not requiring paint or stain.

  2. Windows not requiring paint or stain.

  3. Siding or exterior wall coverings which do not require paint or stain. A4.405.2 Concrete floors. Floors that do not require additional coverings are used including but not limited to stained, natural or stamped concrete floors.

Copyright © 2022 by, or licensed to, International Code Council, Inc. (ALL RIGHTS RESERVED); licensed to California Building Standards Commission pursuant to License Agreement. No further reproductions is authorized. Any unauthorized reproduction or distribution is a violation of the federal copyright act and the license agreement, and subject to civil and criminal penalties thereunder.

APPENDIX A4—RESIDENTIAL VOLUNTARY MEASURES

A4.405.3 Recycled content. Comply with the requirements for recycled content in Section A4.405.3.1.

A4.405.3.1 Recycled content. Use materials, equivalent in performance to virgin materials with a total (combined) recycled content value (RCV) of:

Tier 1. The RCV shall not be less than 10 percent of the total material cost of the project.

Required Total RCV (dollars) = Total Material Cost (dollars) × 10 percent (Equation A4. 4-1)

Tier 2. The RCV shall not be less than 15 percent of the total material cost of the project.

Required Total RCV (dollars) = Total Material Cost (dollars) × 15 percent (Equation A4. 4-2) For the purposes of this section, materials used as components of the structural frame shall not be used to calculate recycled content. The structural frame includes the load bearing structural elements, such as wall studs, plates, sills, columns, beams, girders, joists, rafters and trusses.

Notes:

  1. Sample forms which allow user input and automatic calculation are located at http:// www.hcd.ca.gov/building-standards/calgreen/calgreen-forms.html and may be used to simplify documenting compliance with this section and for calculating recycled content value of materials or assembly products.

  2. Sources and recycled content of some recycled materials can be obtained from CalRecycle if not provided by the manufacturer.

A4.405.3.1.1 Total material cost. Total material cost is the total estimated or actual cost of materials and assembly products used in the project. The required total recycled content value for the project (in dollars) shall be determined by Equation A4.4-1 or Equation A4.4-2.

Total material cost shall be calculated by using one of the methods specified below:

  1. Simplified method. To obtain the total cost of the project, multiply the square footage of the residential structure by the square foot valuation established pursuant to the ICC Building Valuation Data (BVD) or other valuation data approved and/or established by the enforcing agency. The total material cost is 45 percent of the total cost of the project. Use Equations A4.4-3A or A4.4-3B to determine total material costs using the simplified method.

Total material costs = Project square footage × square foot valuation × 45 percent (Equation A4.4-3A)

Total estimated or actual cost of project × 45 percent (Equation A4.4-3B)

  1. Detailed method. To obtain the total cost of the project, add the estimated and/or actual costs of materials used for the project, including the struc

ture (steel, concrete, wood or masonry); the enclosure (roof, windows, doors and exterior walls); the interior walls, ceilings and finishes (gypsum board, ceiling tiles, etc.). The total estimated and/or actual costs shall not include fees, labor and installation costs, overhead, appliances, equipment, furniture or furnishings.

A4.405.3.1.2 Determination of total recycled content value (RCV). Total RCV may be determined either by dollars or percentage as noted below.

  1. Total recycled content value for the project (in dollars). This is the sum of the recycled content value of the materials and/or assemblies considered and shall be determined by Equation A4.4-4. The result of this calculation may be directly compared to Equations A4.4-1 and A4.4-2 to determine compliance with Tier 1 or Tier 2 prerequisites.

Total Recycled Content Value (dollars) = (RCVM + RCVA) (Equation A4.4-4)

  1. Total recycled content value for the project (by percentage). This is expressed as a percentage of the total material cost and shall be determined by Equation A4.4-4 and Equation A4.4-5. The result of this calculation may be directly compared for compliance with Tier 1 (10 percent) or Tier 2 (15 percent) prerequisites.

Total Recycled Content Value (percent) =

[Total Recycled Content Value (dollars) ÷ Total Material Cost (dollars)] × 100

(Equation A4.4-5)

A4.405.3.1.3 Determination of recycled content value of materials (RCVM). The recycled content value of each material (RCVM) is calculated by multiplying the cost of material, as defined by the recycled content. See Equations A4.4-6 and A4.4-7.

RCVM (dollars) = Material cost (dollars) × RCM (percent)

(Equation A4.4-6)

RCM (percent) = Postconsumer content percentage + ( 1 /2) Preconsumer content percentage

(Equation A4.4-7)

Notes:

  1. If the postconsumer and preconsumer recycled content is provided in pounds, Equation A4.47 may be used, but the final result (in pounds) must be multiplied by 100 to show RCM as a percentage.

  2. If the manufacturer reports total recycled content of a material as one percentage in lieu of separately reporting preconsumer and postconsumer values, the total shall be considered preconsumer recycled material.

A4.405.3.1.4 Determination of recycled content value of assemblies – (RCVA). Recycled content value of assemblies is calculated by multiplying the total cost

APPENDIX A4-12 2022 CALIFORNIA GREEN BUILDING STANDARDS CODE

Copyright © 2022 by, or licensed to, International Code Council, Inc. (ALL RIGHTS RESERVED); licensed to California Building Standards Commission pursuant to License Agreement. No further reproductions is authorized. Any unauthorized reproduction or distribution is a violation of the federal copyright act and the license agreement, and subject to civil and criminal penalties thereunder.

of the assembly by the total recycled content of the assembly (RCA), and shall be determined by Equation A4.4-8.

RCVA (dollars) = Assembly cost (dollars) × Total RCA (percent) (Equation A4.4-8)

If not provided by the manufacturer, Total RCA (percent) is the sum (Σ) of the Proportional Recycled Content (PRCM) of each material in the assembly. RCA shall be determined by Equation A4.4-9.

RCA = Σ PRCM (Equation A4.4-9)

PRCM of each material may be calculated by one of two methods using the following formulas:

Method 1: Recycled content (postconsumer and preconsumer) of each material provided in per- centages

PRCM (percent) = Weight of material (percent) × RCM (percent) (Equation A4.4-10)

Weight of material (percent) =

[Weight of material (lbs) ÷ Weight of assembly (lbs)] × 100 (Equation A4.4-11)

RCM (percent) = Postconsumer content percentage + ( 1 /2) Preconsumer content percentage

(See Equation A4.4-7)

Method 2: Recycled content (postconsumer and preconsumer) provided in pounds

PRCM (percent) = [RCM (lbs) ÷ Weight of material (lbs)] × 100 (Equation A4.4-12)

RCM (lbs) = Postconsumer content (lbs) + ( 1 /2) Preconsumer content (lbs) (Equation A4.4-13)

Note: If the manufacturer reports total recycled content of a material as one percentage in lieu of separately reporting preconsumer and postconsumer values, the total shall be considered preconsumer recycled material.

A4.405.3.1.5 Alternate method for concrete. When Supplementary Cementitious Materials (SCMs), such as fly ash or ground blast furnace slag cement, are used in concrete, an alternate method of calculating and reporting recycled content in concrete products shall be permitted. When determining the recycled content value, the percent recycled content shall be multiplied by the cost of the cementitious materials only, not the total cost of the concrete. A4.405.4 Use of building materials from rapidly renew- able sources. One or more of the following materials manufactured from rapidly renewable sources or agricultural byproducts is used:

  1. Insulation.

  2. Bamboo or cork.

  3. Engineered products.

  4. Agricultural based products.

  5. Other products acceptable to the enforcing agency.

APPENDIX A4—RESIDENTIAL VOLUNTARY MEASURES

Note: The intent of this section is to utilize building materials and products which are typically harvested within a 10-year or shorter cycle.

Get a plain-English answer with a citation back to this text.

Ask AI about this code
Export this section
▸Contents — California Green Building Standards Code (Title 24, Part 11)
California Green Building Standards Code (Title 24, Part 11)
  1. Chapter 1 — ADMINISTRATION
  2. Chapter 2 — DEFINITIONS
  3. Chapter 3 — GREEN BUILDING
  4. Chapter 4 — RESIDENTIAL MANDATORY MEASURES
  5. Chapter 5 — NONRESIDENTIAL MANDATORY MEASURES
  6. Chapter 6 — REFERENCED ORGANIZATIONS AND STANDARDS
  7. Chapter 7 — INSTALLER AND SPECIAL INSPECTOR QUALIFICATIONS
  8. Chapter 8 — COMPLIANCE FORMS, WORKSHEETS AND REFERENCE MATERIAL
  9. ▸Appendix A4
    Overview
    1. Section A4.101
    2. Section A4.102
    3. Section A4.103
    4. Section A4.104
    5. Section A4.105
    6. Section A4.106
    7. Section A4.107
    8. Section A4.108
    9. Section A4.201
    10. Section A4.202
    11. Section A4.203
    12. Section A4.301
    13. Section A4.302
    14. Section A4.303
    15. Section A4.304
    16. Section A4.305
    17. Section A4.306
    18. Section A4.401
    19. Section A4.402
    20. Section A4.403
    21. Section A4.404
    22. Section A4.405
    23. Section A4.406
    24. Section A4.407
    25. Section A4.408
    26. Section A4.409
    27. Section A4.410
    28. Section A4.411
    29. Section A4.501
    30. Section A4.502
    31. Section A4.503
    32. Section A4.504
    33. Section A4.505
    34. Section A4.506
    35. Section A4.507
    36. Section A4.508
    37. Section A4.509
    38. Section A4.601
    39. Section A4.602
    40. Section A4.602
    41. Section A4.602
    42. Section A4.602
    43. Section A4.602
    44. Section A4.602
    45. Section A4.602
    46. Section A4.602
    47. Section A4.602
    48. Section A4.602
  10. Appendix A5

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.