Chapter 35 — WELDING AND OTHER HOT WORK
Section 3506
California Fire Code (Title 24, Part 9) · 2022 edition · updated 2026-09-10 · California
CBSC: official editions, supplements and errata
Italicized text is a California amendment to the model code, as printed in the official publication.
3506.1 General. The frame or case of electric hot work¶
machines, except internal-combustion-engine-driven machines, shall be grounded. Ground connections shall be mechanically strong and electrically adequate for the required current.
3506.2 Return circuits. Welding current return circuits from¶
the work to the machine shall have proper electrical contact at joints. The electrical contact shall be periodically inspected.
3506.3 Disconnecting. Electrodes shall be removed from the¶
holders when electric arc welding or cutting is discontinued for any period of 1 hour or more. The holders shall be located to prevent accidental contact and the machines shall be disconnected from the power source.
3506.4 Emergency disconnect. A switch or circuit breaker¶
shall be provided so that fixed electric welders and control equipment can be disconnected from the supply circuit. The disconnect shall be installed in accordance with the Califor- nia Electrical Code.
3506.5 Damaged cable. Damaged cable shall be removed¶
from service until properly repaired or replaced.
Get a plain-English answer with a citation back to this text.
Ask AI about this code