Article 2.5 — HEIGHT AND BULK DISTRICTS›SEC. 263. HEIGHT LIMITS: SPECIAL EXCEPTIONS.
San Francisco Planning Code § 263.36 Stonestown Mixed-Use Height and Bulk District
San Francisco Planning Code · 2026-08 edition · updated 2026-09-23 · San Francisco
Cite as: San Francisco Planning Code § 263.36 · Text as of 2026-09-23
(a) Boundaries of the Stonestown Mixed-Use Height and Bulk District. The boundaries of the Stonestown MixedUse Height and Bulk District are set forth in Sectional Map HT13 of the Zoning Map of the City and County of San Francisco and include all areas that are the subject of the Stonestown Special Use District set forth in Planning Code Section 249.9, as shown on Special Use District Map SU13.
(b) Purpose. The purpose of the Stonestown Mixed-Use Height and Bulk District is to enable development of the Stonestown Special Use District as a high-density, mixed-use, sustainable community consistent with the Purposes set forth in Planning Code Section 249.9 and the Stonestown Design Standards and Guidelines (DSG) referenced therein.
- (c) Controls.
(1) In the Stonestown Mixed-Use Height and Bulk District, height and bulk and definitions applicable thereto are governed by Planning Code Section 249.9 (the Stonestown Special Use District) and the DSG referenced therein.
(2) Amendments to the height and bulk controls in this Stonestown Mixed-Use Height and Bulk District shall be as provided in Section 249.9.
(Added by Ord. 204-24, File No. 240409, App. 8/1/2024, Eff. 9/1/2024, Oper. 9/1/2024)
Get a plain-English answer with a citation back to this text.
Ask AI about this code