Title II — ADMINISTRATION›Part 2 — SPECIAL AREA COMBINING ZONES
Humboldt County Municipal Code § 27.1 L: Landscaping and Design
Humboldt County Municipal Code · 2026-09 edition · updated 2026-10-04 · Humboldt County
Cite as: Humboldt County Municipal Code § 27.1 · Text as of 2026-10-04
27.1.1 Purpose.¶
The Landscaping and Design Combining Zone Regulations are intended to be combined with
principal zones to establish specific landscaping and architectural design standards. (Former Section CZ#A313-43(L))
27.1.2 Applicability.¶
The Board of Supervisors, in approving a zone reclassification as allowed by Chapter 2 of
this division, may combine the Landscaping and Design Combining Zone Regulations with any principal zone. In combining the Landscaping and Design Combining Zone, the Board of Supervisors shall establish specific landscaping and design standards for development within the designated zoning district. (Former Section CZ#A313-43(B)))
27.1.3 Map Designation.¶
When combined with a principal zone, the Landscaping and Design Combining Zone
Regulations shall be represented on the adopted zoning maps by the L designator. The L designator shall immediately follow the principal zone designator and: the maximum density designator, if applied; the S designator, if applied; or the Q designator, if applied. For example: RS-L, RM-15-L, RM-15-Q-L. (Former Section CZ#A313-43(C))) 313-28 “M” Combining Zone Designations
Get a plain-English answer with a citation back to this text.
Ask AI about this code