40.1 Y: SPECIFIED MINIMUM AND AVERAGE LOT SIZES

Size are Both Specified. Whenever the principal zone is modified to specify a minimum lot size and a minimum average-lot size that must be maintained in subdividing any lot within the zone, the following designators shall be used as applicable: (Former Section CZ#A313-41(G))

40.1.1.1 Y - where the development standards are modified for the sole purpose of specifying a minimum lot size and minimum average-lot size. (Former Section CZ#A313-41(G)(2))

40.1.1.2 Y (x) - where, on the zoning maps, “x” indicates the minimum lot size, and where the subdivision of any parcel results in a density consistent with the General Plan. As part of the subdivision action, a rezone to the appropriate Y(x) parcel size designation shall be required. As necessary to maintain consistency with the General Plan, the lot size specification requirements shall be a part of the enforceable restrictions of the subdivision. (Former Section CZ#A313-41(G)(3))

40.1.1.3 (See also, the subsection, Special Combining Zone “SY.”)

The Humboldt County Code is current through Ordinance 2784, passed March 10, 2026.

Page 199 of 1183

Title III Land Use and Development | Humboldt County Code

313-41 (Section Reserved for Future Use)

B

SECTION B: REGULATIONS THAT APPLY IN ALL OR SEVERAL ZONES