Skip to content

Title IIIDivision 1 — PLANNINGPart 2 — SPECIAL AREA COMBINING ZONES

15.2 APPLICABILITY

Humboldt County Zoning Code · 2026-07 edition · updated 2026-07-09 · Humboldt County

The Special Area Combining Zone Regulations shall apply when any of the special area combining zones are combined with a principal zone by the County Board of Supervisors. When more than one regulation is applicable to the same subject matter within a zone, the most restrictive regulation is applicable except in the case of conflicts between the regulations of the Samoa Town Master Plan (STMP) Special Area Combining Zone and other regulations of the zoning ordinance. Where a conflict arises between the regulations of the STMP Combining Zone and any other regulation of the zoning ordinance, the regulations of the STMP Combining Zone shall take precedence.

The land use designations and zoning approved by the Commission with suggested modifications in its action on Humboldt County LCPA HUM-MAJ-01-08 shall not become effective unless and until the entirety of the legal parcel(s) containing APN 401-031-36, APN 401-031-38, APN 401-031-46, APN 401-031-55, APN 401-031-059, APN 401-031-65, and APN 401-031-44, generally depicted on Exhibit 25A and described as the Samoa Town Master Plan

The Humboldt County Code is current through Ordinance 2784, passed March 10, 2026.

Page 142 of 1183

Title III Land Use and Development | Humboldt County Code

Land Use Plan (“STMP-LUP”) Overlay Area, excluding APN 401-031-67 which contains the Samoa Processing Center (recycling facility) (Master Parcel 1), are merged and re-subdivided by parcel map into two master parcels generally depicted on Exhibit 25A. The two (2) resulting parcels shall comprise (1) Master Parcel 2: the combined Public Facilities (PF) area for wastewater treatment and disposal, the Vance Avenue right of way, and the Residential Medium Density (RM) area; and (2) Master Parcel 3: all other STMP lands excluding Master Parcel 1 containing the Samoa Processing Center. If all such property is not merged and re-subdivided by parcel map into Master Parcels 2 and 3 generally depicted on Exhibit 25A, the entirety of the area generally depicted on Exhibit 25A and described as the Samoa Town Master Plan Land Use Plan (“STMP-LUP”) Overlay Area will remain designated as General Industrial, Coastal Dependent Industrial and Natural Resources. If all such property is merged and re-subdivided by parcel map into Master Parcels 2 and 3 generally depicted on Exhibit 25A, the land use designations and zoning approved by the Commission with suggested modifications in its action on Humboldt County LCPA HUMMAJ-01-08 shall become effective upon both: (a) issuance of the coastal development permit for the merger and re-subdivision by parcel map consistent with the certified LCP and (b) recordation of a parcel map consistent with the coastal development permit. Recordation of a parcel map is required and shall not be waived. If a legal lot containing any APN generally depicted on Exhibit 25A straddles the STMP-LUP boundaries generally depicted on Exhibit 25A, the portion of the legal lot containing the APN outside the STMP Overlay Area boundary shall be included within the merger and re-subdivision by parcel map and become part of the immediately adjacent master parcel generally depicted on Exhibit 25A. If the land use designations and zoning approved by the Commission with suggested modification in its action on Humboldt County LCPA HUM-MAJ-01-08 become effective, the Principal Permitted Use of any area subject to the STMP-LUP shall be determined in accordance with the designated Land Uses and in the patterns and locations generally shown on the certified STMP Land Use Map. No minimum or maximum number of lots shall be determined or authorized until or unless a coastal development permit for the comprehensive division of Master Parcel 3 has been approved and issued consistent with all applicable provisions of the certified LCP, including the STMP-LUP. (Former Section CZ#A313-44(B); amended by Ord. 2466, 12/06/2011; amended by Ord.2549, Sec. 1, 04/26/2016)

Get a plain-English answer with a citation back to this text.

Ask AI about this code
Contents — Humboldt County Zoning Code
Humboldt County Zoning Code
  1. Title III
    Overview
    1. Division 1 — PLANNING
      Overview
      1. Chapter 2 — ADMINISTRATION, PROCEDURES, AMENDMENTS AND ENFORCE…
      2. Chapter 1
      3. Chapter 2
      4. Chapter 3
      5. Part 1 — PRINCIPAL ZONES
      6. Part 2 — SPECIAL AREA COMBINING ZONES
      7. Part 1 — USES AND ACTIVITIES
      8. Part 2 — STRUCTURES AND FACILITIES
      9. Part 3 — DEVELOPMENT STANDARDS
      10. Part 4 — REGULATIONS THAT APPLY IN SENSITIVE HABITATS AND HAZA…
      11. Part 5 — NONCONFORMING USES AND STRUCTURES
      12. Part 1 — CLASSIFICATION OF USE TYPES
      13. Part 2 — GLOSSARY OF USE TYPES
      14. Part 1 — PRINCIPAL ZONES
      15. Part 2 — REGULATIONS FOR THE COMBINING ZONES
      16. Part 1 — USES AND ACTIVITIES
      17. Part 2 — STRUCTURES AND FACILITIES
      18. Part 3 — DEVELOPMENT STANDARDS
      19. Part 4 — (SECTION RESERVED FOR FUTURE USE)
      20. Part 5 — NONCONFORMING USES AND STRUCTURES
      21. Part 1 — CLASSIFICATION OF USE TYPES
      22. Part 2 — GLOSSARY OF USE TYPES
  2. Title III — LAND USE AND DEVELOPMENT

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.