Chapter 12-3 — RELEASING SYSTEMS FOR SECURITY BARS IN DWELLINGS
Section 12-3-11 — ABUSE TEST
2025 California Referenced Standards Code (Title 24, Part 12) · 2025 edition · updated 2026-07-29 · California
12-3-11.1 A sample shall comply with the Manual Actuation Test requirements in Sections 12-3-8.2 and 12-3-8.3 after being subjected to the simulated abuse provided in Section 12-3-11.2.
12-3-11.2 The sample shall be subject to six impacts of 5 feet-pounds (6.8 N · m) each applied with a 2-inch diameter (51 mm) steel ball on portions of the release system that are most likely to adversely affect the operation of the system.
MARKINGS AND INSTRUCTIONS
Get a plain-English answer with a citation back to this text.
Ask AI about this code▸ Contents — 2025 California Referenced Standards Code (Title 24, Part 12)
- Chapter 12-1 — ADMINISTRATION
-
▸ Chapter 12-3 — RELEASING SYSTEMS FOR SECURITY BARS IN DWELLINGS
Overview- Section 12-3-1 — SCOPE
- Section 12-3-2 — GENERAL
- Section 12-3-3 — ASSEMBLY
- Section 12-3-4 — MATERIALS
- Section 12-3-5 — TEST SETUP AND SAMPLE PREPARATION
- Section 12-3-6 — SECURE ATTACHMENT TEST
- Section 12-3-7 — OPERATION TEST
- Section 12-3-8 — MANUAL ACTUATION TEST
- Section 12-3-9 — ENDURANCE TEST
- Section 12-3-10 — ENVIRONMENTAL EXPOSURE TEST
- Section 12-3-11 — ABUSE TEST
- Section 12-3-12 — MARKINGS
- Section 12-3-13 — INSTRUCTION MANUAL
- Chapter 12-4A — LABORATORY ANIMAL QUARTERS STANDARDS
- Chapter 12-7A — MATERIALS AND CONSTRUCTION METHODS
- Chapter 12-11A and 11B — BUILDING AND FACILITY ACCESS SPECIFIC…
- Chapter 12-13 — STANDARDS FOR INSULATING MATERIAL
- Chapter 12-31C — RADIATION SHIELDING STANDARDS
- Chapter 12-71 — AIR FILTERS