Skip to content

Chapter 2 — ALL OCCUPANCIES—MANDATORY REQUIREMENTS FOR THE MANUFACTURE, CONSTRUCTION AND INSTALLATION OF SYSTEMS, EQUIPMENT AND BUILDING COMPONENTS

Section 110.1 — MANDATORY REQUIREMENTS FOR APPLIANCES

2025 California Energy Code (Title 24, Part 6) · 2025 edition · updated 2026-07-25 · California

(a) Any appliance regulated by the Appliance Efficiency Regulations, Title 20 California Code of Regulations, Section 1601 et seq., may be installed only if the appliance fully complies with Section 1608(a) of those regulations.

(b) Except for those circumstances described in Section 110.1(c), conformance with efficiency levels required to comply with Part 6 mandatory, prescriptive and performance standards shall be verified utilizing data from either:

  1. The Energy Commission’s database of certified appliances maintained pursuant to Title 20 California Code of Regulations Section 1606, and which is available at: www.energy.ca.gov/appliances/database/ ; or
  2. An equivalent directory published by a federal agency; or
  3. An approved trade association directory as defined in Title 20 California Code of Regulations Section 1606(h).

(c) Conformance with efficiency levels required to comply with Part 6 mandatory, prescriptive and performance standards shall be demonstrated either by default to the mandatory efficiency levels specified in Part 6 or by following procedures approved by the Commission pursuant to Section 10-109 of Title 24, Part 1, when:

  1. Data to verify conformance with efficiency levels required to comply with Part 6 mandatory, prescriptive and performance standards is not available pursuant to subdivision (b); or
  2. Field verification and diagnostic testing is required for compliance with Part 6 and the Energy Commission has not approved a field verification and diagnostic test protocol that is applicable to the appliance; or
  3. The appliance meets the requirements of Section 110.1(a) but has been site-modified in a way that affects its performance; or

on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.

ALL OCCUPANCIES—MANDATORY REQUIREMENTS FOR THE MANUFACTURE, CONSTRUCTION AND INSTALLATION OF SYSTEMS, EQUIPMENT AND BUILDING COMPONENTS

  1. The U.S. Department of Energy has approved a waiver from federal test procedures, pursuant to 10 CFR Section 430.27 or Section 431.401 and that waiver fails to specify how the efficiency of the system shall be determined.

Note: Authority: Sections 25213, 25218, 25218.5, 25402 and 25402.1, Public Resources Code . Reference: Sections 25007, 25008, 25218.5, 25310, 25402, 25402.1, 25402.4, 25402.5 , 2 5402.8, and 25943, Public Resources Code.

Get a plain-English answer with a citation back to this text.

Ask AI about this code
Contents — 2025 California Energy Code (Title 24, Part 6)
2025 California Energy Code (Title 24, Part 6)
  1. Chapter 1 — ALL OCCUPANCIES—GENERAL PROVISIONS
  2. Chapter 2 — ALL OCCUPANCIES—MANDATORY REQUIREMENTS FOR THE MAN…
  3. Chapter 3 — NONRESIDENTIAL, HOTEL/MOTEL OCCUPANCIES, AND COVER…
  4. Chapter 4 — NONRESIDENTIAL AND HOTEL/MOTEL OCCUPANCIES—MANDATO…
  5. Chapter 5 — NONRESIDENTIAL AND HOTEL/MOTEL OCCUPANCIES—PERFORM…
  6. Chapter 6 — NONRESIDENTIAL AND HOTEL/MOTEL OCCUPANCIES—
  7. Chapter 7 — SINGLE-FAMILY RESIDENTIAL BUILDINGS—
  8. Chapter 8 — SINGLE-FAMILY RESIDENTIAL BUILDINGS—PERFORMANCE AN…
  9. Chapter 9 — SINGLE-FAMILY RESIDENTIAL BUILDINGS—ADDITIONS AND …
  10. Chapter 10 — MULTIFAMILY BUILDINGS—MANDATORY REQUIREMENTS
  11. Chapter 11 — MULTIFAMILY BUILDINGS—PERFORMANCE AND PRESCRIPTIV…
  12. Chapter 12 — MULTIFAMILY BUILDINGS—ADDITIONS, ALTERATIONS AND …

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.