Section 2605 — PLASTIC VENEER — 2025 California Building Code (Title 24, Part 2)

2605.1 Interior use. ¶

2605.1 Interior use. Where used within a building, plastic veneer shall comply with the interior finish requirements of Chapter 8.

Ask AI about § 2605.1

2605.2 Exterior use. ¶

2605.2 Exterior use. Exterior plastic veneer, other than plastic siding, shall be permitted to be installed on the exterior walls of buildings of any type of construction in accordance with all of the following requirements: 1. Plastic veneer shall comply with Section 2606.4. 2. Plastic veneer shall not be attached to any exterior wall to a height greater than 50 feet (15 240 mm) above grade. 3. Sections of plastic veneer shall not exceed 300 square feet (27.9 m [2] ) in area and shall be separated by not less than 4 feet (1219 mm) vertically. Exception: The area and separation requirements…

provision permitted lot commission district approval parking minimum height dwelling application requirement review coverage subject setback occupancy development standard accessory yard section structure compliance use provision permitted lot commission district approval parking minimum height dwelling application requirement review coverage subject setback occupancy development standard accessory yard section structure compliance use provision permitted lot commission district approval parking minimum height dwelling application requirement review coverage subject setback occupancy development standard accessory yard section structure compliance use provision permitted lot commission district approval parking minimum height dwelling application requirement review coverage subject setback occupancy development standard accessory yard section structure compliance use provision permitted lot commission district approval parking minimum height dwelling application

Ask AI about § 2605.2

2605.3 Plastic siding. ¶

2605.3 Plastic siding. Plastic siding shall comply with the requirements of Sections 1403 and 1404.

Ask AI about § 2605.3