6.2.2 PERMITTED USES

• (a) Any use which is a Permitted Use in the C-4 Service Commercial Districts.

  • (b) Lumber yard.

  • (c) Planing mill.

  • (d) Public utility, substation, public service structure, shop or storage facility including service yards.

  • (e) Storage warehouse.

  • (g) Light manufacturing, processing, packaging, treatment or fabrication of goods and merchandise.

  • (h) Deleted.[1]

  • (i) Incidental and accessory structures and uses on the same site with and necessary to the operation of a Permitted Use.

• 6.2.3 CONDITIONAL USES - The following uses shall be permitted only when authorized by a Conditional Use Permit:[2]

  • (a) Animal hospitals.

1 Deleted by Ord. 477, 12/8/71

2 Amended Ord. 2018-1131, §21, 4/24/2018

City of Belmont Zoning Ordinance

6-1

• (b) Asphalt or concrete readymix plant.

• (c) Broadcasting tower for radio or television.

• (d) Disposal of garbage or waste material by sanitary land fill or fill and cover methods, or by composting or incineration.

• (e) Mobile home park.

• (f) Reserved.[3]

• (g) Storage, for wholesale or for distribution in bulk, of any flammable liquid.

• (h) Incidental and accessory structures and uses located on the same site with and necessary to the operation of a Conditional Use.

• (i) Truck storage yards and terminals.[4]

• (j) Other uses which, in the opinion of the Planning Commission, are similar to those listed permitted uses.[5 ]

• 6.2.4 LANDSCAPING - All new structures established in this District shall be subject to landscaping requirements as prescribed in Section 13.3 of this Ordinance.[6]

• 6.3 EXCLUSIVE MANUFACTURING - M-E District - The M-E District is established to provide for an environment conducive to the development and protection of specialized manufacturing organizations, large scale administrative facilities and research institutions, all of a non-nuisance type. The district is established to protect the compatibility of the uses located therein as well as to insure that they will not be detrimental to the surrounding, non-manufacturing land uses.[7]

• 6.3.1 GENERAL CONDITIONS OF USE - The regulations set forth in this section shall apply to all land in any M-E District, and shall be subject to all the general provisions of this Ordinance.[8]

No use shall be permitted, the nature or manner of operation of which shall be determined by the Zoning Administrator to be unduly hazardous or injurious to other properties in the vicinity or to the general public welfare by reason of the emission of odor, dust, smoke, noise, vibration, electrical or other disturbance.

• 6.3.2 PERMITTED USES[9]

  • (a) Manufacturing, processing, assembly, packaging, or storage of products and materials, but not including the rendering or refining of fats and oils.

3 Amended by Ord. 2015-1090, §2, 9/8/2015

4 Amended by Ord. 494, 1/10/73

5 Amended by Ord.477, 12/8/71; Ord. 494, 1/10/73

6 Amended by Ord. 641, 2/21/79

7 Amended by Ord. 526, 4/24/74

8 Amended by Ord. 526, 4/24/74

9 Amended by Ord. 526, 4/24/74

City of Belmont Zoning Ordinance

6-2

• (b) Administrative and executive offices.

  • (c) Research and development laboratory.

  • (d) Public utilities, substation, public service structure, shop or manufacturing facility including service yards.

  • (e) Storage warehouse.

  • (f) Automobile parking lot.

  • Incidental and accessory structures and uses on the same site with and necessary to the operation of a permitted use.

• 6.3.3 CONDITIONAL USES - The following uses shall be permitted only when authorized by a Conditional Use Permit:[10]

  • (a) Animal hospitals.

  • (b) Asphalt or concrete ready-mix plant.

  • (c) Broadcasting tower for radio or television.

  • (d) Storage, for wholesale or for distribution in bulk, of any flammable liquid.

  • (e) Incidental and accessory structures and uses located on the same site with and necessary to the operation of a Conditional Use.

• 6.4 CONDITIONS OF USE - In any M District, the above permitted uses are subject to the following:[11]

• 6.4.1 Any assembly, production, processing, cleaning, servicing, testing, repair or storage of goods, materials or products shall be conducted so as not to create odor, noise, vibrations, smoke or dust in amounts greater than those permitted by appropriate Federal and State Regulations.

• 6.4.2 All business, production, servicing and processing shall take place within completely enclosed buildings, except as may be otherwise specifically authorized.

All storage within 150 feet of the nearest point of any residential district shall be in completely enclosed buildings or structures. Storage located elsewhere in this district may be open to the sky, but shall be enclosed by solid walls or fence, including solid doors or gates thereto, at least six feet high, but in no case lower in height than the enclosed storage. However, open off-street loading facilities and open off-street parking facilities for the storage of motor vehicles may be unenclosed throughout the district except for such screening of parking and loading facilities as may be required under the provisions of Section 8 herein.

10 Amended by Ord. 526, 4/24/74; amended by Ord. 2018-1131, §22, 4/24/2018

11 Amended by Ord. 526, 4/24/74

City of Belmont Zoning Ordinance

6-3

• 6.5 SIDE YARD AND REAR YARD - Transitional side and rear yards shall be provided in any M District in accordance with Section 9.7.5 herein.[12]

• 6.6 HEIGHT OF STRUCTURES - The heights of any structure in any M District when located within 50 feet of any R District shall be not greater than the height of structures permitted in such R District.[13]

• 6.7 OFF STREET PARKING AND LOADING - Facilities shall be provided as required or permitted in Section 8.

• 6.8 DESIGN REVIEW - All uses shall be subject to design review as prescribed in Section 13 of this Ordinance.[14]

• 6.9 LANDSCAPING - All new structures established in this District shall be subject to landscaping requirements as prescribed in Section 13.3 of this Ordinance.[15]

12 Amended by Ord. 526, 4/24/74

13 Amended by Ord. 526, 4/24/74

14 Amended by Ord. 526, 4/24/74

15 Amended by Ord. 641, 2/21/79

City of Belmont Zoning Ordinance

6-4

SECTION 7 – AGRICULTURAL (REPEALED)[1]

1 Repealed by Ord. 2017-1124, §33, 11/28/2017

City of Belmont Zoning Ordinance

5C-1

*SECTION 7A - SCHOOLS AND COMPATIBLE MULTIPLE USES

• ** 7A.1 SCHOOLS AND COMPATIBLE MULTIPLE USE DISTRICTS ESTABLISHED - Certain areas of the City, designated by the symbol SC and referred to as School and Compatible Multiple Use Districts, are established to provide for the location of schools and certain other compatible uses within or adjacent to school buildings and structures. This district implements sections of the California Education Code which permit joint occupancy of schools and authorize the use of vacant school property and buildings for certain uses and users which are of a scale and intensity compatible with the public school and its neighborhood (i.e. school attendance area). Such uses and users include nonprofit organizations, community agencies, professional agencies, commercial and noncommercial firms, corporations, partner-ships, businesses and individuals that are consistent with maintaining the residential integrity of the neighborhood. The fundamental objectives of this district are:

  • (a) Maintenance and continued operation of neighborhood schools, including the public recreational uses at the schools, while allowing for the joint occupancy of vacant school property and buildings during periods of less than capacity enrollment.

  • (b) Maintenance of the residential integrity of the public school neighborhood.

  • (c) Involvement of community and neighborhood residents in determining the compatibility of any proposed commercial use as defined herein, use including such considerations as physical location, surroundings and availability of facilities.

• ** 7A.2 PERMITTED USES

  • (a) Public schools and uses by other school districts, federal government or its agencies, the state, county, city and county, city or special districts as permitted and regulated by the State Education Code, as it may be amended.

  • (b) Parochial schools, private schools, and colleges.

  • (c) Activities of religious organizations including regular church services.

  • (d) Private day or residential schools and colleges, including education, business or professional schools.

  • (e) Library and library extension services.

  • (f) Activities and administrative offices of community/charitable organizations, including senior citizens' services.

  • (g) Activities and administrative offices of civic and service organizations, e.g. Rotary, Lions, Kiwanis, Y.M.C.A., etc.

• Section 7A added by Ord. #620, 4/27/78

• ** Amended by Ord. #761, 4/10/87

City of Belmont Zoning Ordinance

7A-1

• (h) Nursery schools and day care centers.

• (i) Tutorial related services for elementary/secondary age students.

• 7A.3 CONDITIONAL USES

The following uses shall be permitted when authorized by a Conditional Use Permit issued in accordance with the provisions of Sections 7A.4 and 11 herein:

• (a) Commercial recreation.

• (b) Insurance company.

• (c) Employment office.

• (d) Direct mail order house.

• (e) Storage and warehouse completely enclosed within a building and incidental or accessory to another use, and subject to Fire Department approval for safety.

  • (f) Professional studios.

  • (g) Answering services.

  • (h) Public accounting.

  • (i) Tax preparation office.

  • (j) Textbook/newspaper/magazine publishing administrative offices.

  • (k) Professional executive offices.

  • (l) Travel/ticket agency.

  • (m) Computer/data control center specifically excluding the manufacture of computers or computer components.

  • (n) Social services office/administration.

  • (o) Repair, maintenance and storage of vehicles used in a public or private transportation system that includes transportation service within the City of Belmont.

  • (p) New construction (i.e. addition of floor area) to accommodate any non-school use.

  • (q) Trade schools.

• Amended by Ord. #761, 4/10/87

City of Belmont Zoning Ordinance

7A-2

• (r) Other uses, which the Planning Commission determines are similar and/or accessory to those listed Conditional Uses or uses it determines are appropriate and applicable to a particular school.

• (s) Special education specifically excluding such programs as trade schools, classes for juvenile delinquents, correctional facilities, drug or alcohol dependency/abuse, or similar type programs.

• 7A.4 GENERAL REGULATIONS

  • (a) It shall be the responsibility of the school district to provide for and ensure acceptable separation between the school and non-school use dependent upon such conditions as location, shared facilities and intensity of proposed non-school use.

  • (b) Off-street parking and loading space shall be provided in accordance with Section 8 herein.

  • (c) All commercial uses shall be designed and conducted to minimize noise, traffic congestion, safety hazards, or any other condition that could significantly affect public health, safety or welfare.

  • (d) Use of any school site other than as provided in Section 7A.2(a) shall not be approved until a site utilization plan has been approved by the Planning Commission pursuant to the Conditional Use Permit Provisions of this Ordinance and by the City Council pursuant to the hearing procedures in Government Code Sections 65856 and 65857 or their successors; provided, however, the limitation shall not apply to specific uses lawfully established prior to the effective date of this amendment. However, any new use other than as provided in Section 7A.2(a) shall only be permitted after the approval of a school utilization plan. Such a school utilization plan shall provide for at least the following:

    • 1. A site plan delineating the proposed amount, use and location of space for both school and non-school uses. The plan shall identify vehicle access and parking as related to all existing and proposed uses.

• 2. A list of specific commercial uses to be accommodated on the site. For the purposes of this provision, commercial uses are all those listed Permitted and Conditional Uses, except for those uses provided for under Section 7A.2(a) and (h) of this Ordinance. Each use shall be described in sufficient detail as to permit a clear understanding of any potential site and neighborhood impacts.

     • 3. A minimum five (5) year school enrollment projection, and a statement of the time period the joint occupancy program (if any) for the school shall be in effect.

• Amended by Ord. #761, 4/10/87

City of Belmont Zoning Ordinance

7A-3

• 4. Such other information as may be required by the Planning Commission.

Once such a utilization plan has been approved by the Planning Commission and City Council, no additional use permit shall be required unless a change is proposed to the approved site plan or list of allowed uses. However, each specific lease shall be reviewed and certified by the Zoning Administrator as conforming with the provisions of the School Utilization Plan. In addition, each approved School Utilization Plan shall be reviewed by the Planning Commission annually at a fully noticed public hearing to insure that the plan and joint occupancy continue to meet the objectives of the SC District.

• (e) No more than thirty percent (30%) of the total district classroom space shall be used for commercial uses. For the purposes of this provision, commercial uses are all those listed Permitted and Conditional Uses, except for those uses provided for under Section 7A.2(a) and (h) of this Ordinance. However, up to forty-five percent (45%) of the total classroom space at any individual school may be leased to commercial uses.

• (f) In addition to all of the preceding requirements, all uses of land in the SC District shall be subject to the general provisions of Section 9 of this Ordinance.

City of Belmont Zoning Ordinance 7A-4

SECTION 7B – OPEN SPACE PUBLIC[1]

• 7B.1 OPEN SPACE DISTRICTS ESTABLISHED - Certain districts, designated by the symbol OS-P and referred to as Public Open Space Districts, are established to provide for and preserve open space uses of land and to establish standards for such uses. This use of land is generally defined as unimproved land or water area managed and used for public open space purposes including preservation and enhancement of natural resources, outdoor recreation, and public health and safety. This land use may embody multiple open space functions – passive outdoor recreation areas, public trails and connections, and serve to define the suburban area, reduce risk from geologic hazards, and protect public views and wildlife habitat.

The following regulations shall apply in any OS-P District, and shall be subject to all applicable general regulations and provisions of this Ordinance. No structure or land shall be used, and no building or structure shall be hereafter erected, structurally altered, or enlarged in a public open space (OS-P) zone, otherwise than in conformance with the provisions of this chapter.

7B.2 PERMITTED USES

• (a) Public park or open space area.

• (b) Public facilities accommodating and supporting passive recreational activities including:

  • Fitness/training paths and equipment

  • Interpretive facilities (kiosks, signs or accessory structures)

  • Non-motorized boating and access facilities

  • Overlooks

  • Picnic facilities (tables, barbeques, fire pits, waste collection etc.)

  • Restrooms

  • Small-scale fishing and viewing docks

  • Trails, trail heads, and trail head parking

• (c) Public buildings and grounds necessary for the public health, safety or welfare.

• (d) Public utility and public service structures or installations necessary for the public health, safety or welfare.

• (e) Maintenance as required to replant native species, protect and promote the natural ecosystem, eliminate exotic plant materials and reduce the potential for wildland fire. Minor maintenance of vegetation such as mowing or trimming.

• (f) Construction or maintenance of minor structures, such as fences, gates, culverts and drainage ditches.

1 Added by Ord. 1072, 11/12/2013

City of Belmont Zoning Ordinance 7B-1

• 7B.3 CONDITIONAL USES. The following Conditional Uses shall be permitted upon the granting of a Use Permit:[2]

  • (a) None.

• 7B.4 GENERAL REGULATIONS

  • (a) Design Review. Any new public buildings shall be subject to Design Review as prescribed in Section 13 of this Ordinance.

  • (b) Parking. Off-street parking and loading spaces shall be provided in accordance with Section 8 (Parking Regulations) of this Ordinance.

  • (c) Building Height. The maximum building height shall be two stories or 28 feet.

2 Amended Ord. 2018-1131, §23, 4/24/2018

City of Belmont Zoning Ordinance

7B-2

SECTION 8 - OFF-STREET PARKING AND LOADING[1]

Editor’s Note: Current through Ordinance 2025-1192

• 8.1 SCOPE OF REGULATIONS - The off-street parking and loading provisions of this Section apply to all existing and new development as follows:

• 8.1.1 For all buildings and structures erected and all uses of land established after the effective date of this Section, accessory parking and loading facilities shall be provided in accordance with the regulations of the district in which such buildings or uses are located provided, however, that in the event a building permit has been issued prior to the effective date of this Ordinance, and provided that construction is begun within 60 days of such effective date and diligently prosecuted to completion, parking and loading facilities need not be provided as required in this Section.

• 8.1.2 Except as provided in Section 24, Accessory Dwelling Units, when the intensity of use of any building, structure or premises shall be increased through the addition of dwelling units, gross floor area, seating capacity or other units of measurement specified in this Section for required parking facilities, parking facilities as required shall be provided for such increase in intensity of use.

1.2 Except as provided in Section 24, Accessory Dwelling Units, when the intensity of use of any building, structure or premises shall be increased through the addition of dwelling units, gross floor area, seating capacity or other units of measurement specified in this Section for required parking facilities, parking facilities as required shall be provided for such increase in intensity of use.

• 8.1.3 Whenever the existing use of a building or structure shall be changed to a new use, parking facilities shall be provided as required for such new use. However, if said building or structure was erected prior to the effective date of this Ordinance, additional parking or loading facilities shall be required only in the amount which the requirements for the new use would exceed those for the existing use, if the latter were subject to the parking and loading provisions of this Ordinance

• 8.2 GENERAL REGULATIONS. Parking must be provided generally as indicated in Table 8.21, Minimum Parking in the R-1, HRO, NC, SC, E-1, E-2.1, E-2.2, M, M.E. S-1, and S-2 Special Combining Districts, OS-P, and PS and in Table 8.2-2, Parking Standards in the R- 2, R-3, R-4, CMU, RC, HIA-1, HIA-2 and Belmont Village Specific Plan Districts. All parking must be developed and maintained according to the standards of this Subsection 8.2. All square feet (sf) figures represent gross floor area.

Table 8.2-1: Minimum Parking in the R-1, HRO, NC, SC, E-1, E-2.1, E-2.2, M, M.E. S-1, and S-2 Special Combining

Districts, OS-P, and PS[1]

1 Added by Ord. 2025-1192, §50, 12/9/2025

City of Belmont Zoning Ordinance

8-1

City of Belmont Zoning Ordinance

8-2

Note:

1 Minimum parking standards do not apply for residential, commercial, and industrial development on properties located within one half-mile radius of a major transit stop; however, minimum parking standards may be required for certain projects if the findings provided in Assembly Bill 2097 / Government Code Section 68563.2 can be made in the affirmative.

2 For non-residential uses, on-street parking spaces located immediately adjacent to the frontage of the property may be counted toward required off-street parking.

• 8.2.1 MINIMUM REQUIREMENTS

• 8.2.1.1 No Reduction in Off-Street Parking and Loading Spaces Off-street parking and loading spaces established as of the effective date of the ordinance codified in this section may not be reduced in number during the life of the building or land use below that which would be required for a new building or use of a similar type under the requirements of this section. Off-street parking and loading spaces must remain permanently available and accessible for the parking or loading of vehicles by occupants of the property, except that any surplus spaces may be rented out to non-occupants, or otherwise made publicly accessible with the provision that such spaces must be vacated on 30 days notice if they become needed by occupants of the property.

• 8.2.1.2 Separate Parking and Loading Spaces . No area may be utilized and counted both as a required parking space and a required loading space. However, maneuvering aisles and driveways may serve both required parking spaces and loading spaces if they meet the requirements specified in this Section for both parking and loading facilities.

• 8.2.1.3 Parking for Persons with Disabilities . The number, design, designation, and location of parking spaces for Persons with Disabilities must comply with State law. Such spaces will be counted towards the parking requirements of this Section.

• 8.2.1.4 Nonconforming Parking Facilities . Existing land uses with off-street parking and loading facilities that do not conform to the requirements of this section may be enlarged or expanded, provided that an in-lieu parking fee is paid, if established, or additional parking and loading facilities are added, either on-site or off-site, so that the parking needs for the enlarged or expanded portion of the building are met. Exceptions to this requirement may be granted by the Planning Commission for small sites and projects determined by the Commission to provide community benefits.

ed, provided that an in-lieu parking fee is paid, if established, or additional parking and loading facilities are added, either on-site or off-site, so that the parking needs for the enlarged or expanded portion of the building are met. Exceptions to this requirement may be granted by the Planning Commission for small sites and projects determined by the Commission to provide community benefits.

• 8.2.1.5 Unbundled Parking . The following rules will apply as conditions of approval to the rental of parking spaces in new Multi-Unit Residential buildings with ten or more rental units. The Community Development Director may grant an exception from the requirements of this subsection for affordable rental units that include financing for affordable housing that requires that costs for parking and housing be bundled together.

  • (a) All off-street parking spaces that are beyond a base allowance of one per unit must be rented separately from the rental fees for dwelling units for the life of the dwelling units, such that potential renters have the option of renting a residential unit with only one parking space at a price lower than would be the case if there were a single price for both the residential unit and all of the parking space(s).

City of Belmont Zoning Ordinance

8-3

• (b) In cases where there are fewer parking spaces than dwelling units, the parking spaces shall be offered first to the potential renters of three bedroom or more units, second to potential renters of two bedroom units, and then to potential renters of other units.

• (c) Potential renters of affordable units must have an equal opportunity to rent a parking space on the same terms and conditions as offered to potential renters of market-rate units, at a price proportional to the rent of their units as compared to comparable marketrate units. This requirement must be included in any agreement recorded between the City and developer pertaining to the affordable housing units under Section 29 (Affordable Housing).

• (d) Parking spaces must be offered only to residents of the dwelling units served by the offstreet parking, except that any surplus spaces may be rented out to non-residents, or otherwise made available for public use, with the provision that such spaces must be vacated on 30 days’ notice if they are needed by residents. Required visitor spaces shall not be rented out, but may be made available for public use.

• 8.2.1.6 Garages/Carports/Uncovered Residential Parking . For residential uses, required offstreet parking located in the front half of a lot or within 25 feet of the side street on a corner lot must be covered with carport, garage or roofed structure except as allowed below. Uncovered off-street parking may be located in the rear half of the lot when more than 25 feet from a side street.

• 8.2.1.7 Surface Parking Lots . Surface parking lots are subject to the following restrictions and standards. The area of a surface parking lot must include all features within the lot’s outer edges, including all parking spaces, maneuvering aisles, access driveways, and perimeter and interior landscaping, walkways, and other features.

  • (a) Large Parking Lots . If on-site parking for more than 50 spaces is needed, the parking facilities must be designed to have exceptional landscaping or design features, be located such that it is not highly visible from public rights-of-way, be provided within buildings or parking structures or in separate lots that are each less than two acres in size, or be otherwise covered by a structure that serves a non-parking function, such as solar panels, recreational facilities, roof deck, or green roof.

  • (b) Pedestrian Circulation . Parking lots containing 25 or more spaces must have walkways separated from motor vehicle maneuvering aisles and driveways connecting the principal building or buildings served by the lot to the farthest point of the lot from the main pedestrian entrance of such building or buildings.

    • (1) Materials and Width. Walkways must provide at least four feet of unobstructed width and be hard-surfaced.

    • (2) Identification. Pedestrian walkways must be clearly differentiated from driveways, parking aisles, and parking and loading spaces through the use of elevation changes, curb separation, different paving material, or similar method.

    • (3) Separation. Where a pedestrian walkway is parallel and adjacent to an auto travel lane, it must be raised and separated from the travel lane by a raised curb at least six inches high, bollards, or other physical barrier.

City of Belmont Zoning Ordinance

8-4

• 8.2.2 CALCULATION OF REQUIRED SPACES

• 8.2.2.1 Fractions . When calculating required parking or loading spaces, fractions of a space greater than 0.5 are rounded up to the next highest whole number.

• 8.2.2.2 Multiple Uses . When two or more principal uses are located on the same lot, the estimated peak period parking demand shall be the sum of the estimated demand of the various individual uses during the period of peak combined demand for all uses, as determined through a parking study prepared by a qualified individual or firm.

• 8.2.2.3 Area-Based Estimates . All area-based estimated peak period parking demands shall be computed on the basis of gross floor area, excluding parking and loading areas.

• 8.2.2.4 Exclusion of First 2,500 Square Feet . For all nonresidential uses , the first 2,500 square feet of active uses, as defined in Section 2.4.1 Active Use, shall be subtracted from the gross square footage of the use when calculating the estimated parking demand.

• 8.2.2.5 Motorcycle Parking . Every four motorcycle parking spaces are credited as one automobile parking space, not to exceed five percent of the total number of automobile parking spaces required. Motorcycle parking spaces must be no less than four feet wide by eight feet long with an aisle width of no less than 10 feet and clearly marked.

• 8.2.2.6 Minimum Parking Requirements . Except as otherwise provided in this Section and Government Code Section 65863.2, no less than the minimum number of parking spaces in Table 8.2-1 and Table 8.2-2 must be provided for each use or site.

• 8.2.2.7 Maximum Private Parking Requirements . Except as otherwise provided in this Section, no more than the maximum number of private, off-street parking spaces, as specified in Table 8.2-1 and Table 8-2.2, may be provided for each use or site.

• 8.2.3 DESIGN STANDARDS. The parking area design standards of this section apply to all offstreet parking. All required parking spaces and associated maneuvering aisles, driveways, and other related features must be designed and arranged so as to provide motor vehicles with adequate ingress to and egress from all required parking spaces, and to provide pedestrians with adequate access to parked vehicles.

• 8.2.3.1 Parking Layout and Dimensions . The layout and dimensions of off-street parking facilities must conform to Figure 8.2.3-1 and Table 8.2.3-1, as further provided below.

  • (a) Regulatory and Calculated Dimensions . Stall width, stall length, and aisle width, as shown in Table 8.2.3-1, are regulatory. Other dimensions shown in Table 8.2.3-1 are calculated from these required dimensions and are provided for convenience.

  • (b) Stall Width and Length . As indicated in Table 8.2.3-1, the required minimum stall width and length for various parking angles are as set forth below.

    • (1) Width. For parking angles of more than 30 degrees the minimum stall width is eight feet six inches. For parking angles of 30 degrees or less, the required minimum stall width is eight feet.

    • (2) Length. For all parking angles other than parallel parking, the minimum stall length is 18 feet. For parallel parking, the minimum stall length is 20 feet.

City of Belmont Zoning Ordinance

8-5

• (c) Aisle Width for Parking Angles Not Shown . For parking angles not shown in Table 8.2.3-1, the required aisle width is interpolated from the values in the table. For example, for a parking angle of 70 degrees, which is two-thirds of the increment between 60 degrees and 75 degrees, the required one-way aisle width is 18 feet eight inches, which is two-thirds of the increment between the required aisle widths for 60-degree parking and 75-degree parking, 16 feet and 20 feet respectively .

• (d) Alternate Maneuvering Aisle and Parking Space Widths . For parking angles equal to or greater than 45 degrees and less than 90 degrees, one-way aisle width may be decreased by three inches for each one-inch increase in stall width, up to a maximum stall width of nine feet two inches. For 90-degree parking, one-way and two-way aisle width may be decreased by three inches for each one-inch increase in stall width, up to a maximum stall width of nine feet two inches and a minimum aisle width of twenty-two feet.

less than 90 degrees, one-way aisle width may be decreased by three inches for each one-inch increase in stall width, up to a maximum stall width of nine feet two inches. For 90-degree parking, one-way and two-way aisle width may be decreased by three inches for each one-inch increase in stall width, up to a maximum stall width of nine feet two inches and a minimum aisle width of twenty-two feet.

• (e) Two-Way Modules . Table 8.2.3-1 provides the dimensions for parking modules with one-way traffic. For parking modules with two-way traffic, add the difference in width between a two-way aisle and a one-way aisle. For example, for a two-way module with a parking angle of 45-degrees, add eight feet, which is the difference between a two-way aisle (20 feet) and a one-way aisle (12 feet).

• (f) Overhang . Parking stall lengths, except for parallel spaces, may be reduced by two feet where the parking stall is designed to abut a landscaped area a minimum of five feet wide, such that the front of the vehicle can overhang the landscaped area.

• (g) Spaces Abutting Walls or Posts. For each side of a parking space abutting a wall or post, an additional foot of width shall be required.

Figure 8.2.3-1: Parking Layout

==> picture [222 x 266] intentionally omitted <==

City of Belmont Zoning Ordinance

8-6

Table 8.2.3-1: Parking Dimensions

• 8.2.3.2 Driveways and Access . The layout and dimensions of off-street parking facilities shall be as set forth in Figure 8.2.3-1 and Table 8.2.3-1, as further provided below.

(a) Driveway Width .

• (1) Parking facilities containing fewer than 15 required parking spaces shall have only a single driveway of no less than nine feet and no more than 10 feet in width.

• (2) Parking facilities containing 15 or more required parking spaces may have one lane driveways of no less than nine feet and no more than 10 feet in width, and two-lane driveways of no less than 18 feet and no more than 20 feet in width.

(b) Vehicle Flow .

• (1) Except for those serving four or fewer residential units, all parking areas shall be designed so that a motor vehicle leaving the parking area will enter the public rightof-way traveling in a forward direction.

• (2) Parking areas shall be designed so that a vehicle will not have to enter a public rightof-way to move from one location to another within the parking area.

(c) Semi-Circular Driveways .

• (1) Notwithstanding the requirements in Section 8.2.4(c)(1), R-1 and R-2 Zones, semicircular driveways may be permitted in Single (R-1) or Duplex Residential (R-2) Districts, provided all of the following minimum property standards/requirements are met:

Table 8.2.3-2: Semi-Circular Driveways

City of Belmont Zoning Ordinance

8-7

  - (2) A maximum of two curb cuts and maximum sum total of 29 lineal feet for curb cuts per property are permitted in conjunction with a semi-circular driveway. 

  - (3) Semi-circular driveways do not count towards the satisfaction of required parking. 

  - (4) No portion of a semi-circular driveway may be located within the required side yard setback area for the property. 

  - (5) Semi-circular driveways are not be allowed to span or be connected to both street frontages on corner lots. 

  - (6) Establishment, replacement, or modification of a semi-circular driveway are subject to the Building and Encroachment Permit processes for the City. A landscape plan is required as part of the permit. 

  - (7) Any new or replaced semi-circular driveway must be constructed with a permeable surface. 

  - (8) Permanent or temporary structures are not permitted to be located on a semi-circular driveway. 

  - (9) Recreational vehicles, trailers, camper shells, boats, boat or personal watercraft trailers, or any combination thereof may not, at any time, be parked or located on a semi-circular driveway. 

  - (10) Abandoned, wrecked, dismantled, inoperative or unregistered motor vehicles, vans, minivans, pickup trucks or similar vehicles may not, at any time, be parked or stored on a semi-circular driveway. 

  - (11) Any modification from these standards and requirements is subject to the procedure and findings in Section 10. 

• 8.2.3.3 Surface . All outdoor parking spaces, driveways, and maneuvering areas must be designed, built and permanently maintained to avoid dust, mud and standing water and to maximize permeability, where feasible and appropriate. These surfaces may include traditional asphalt and concrete as well as pervious pavements, sand-set pavers, and supported turf systems. A combination of surfaces may be used; for example, two track driveways of concrete strips with pervious areas between the strips and on the edges.

  • (a) Cross-grades . Cross-grades must be designed for slower stormwater flow and to direct stormwater toward landscaping, bio-retention areas, or other water collection/treatment areas.

City of Belmont Zoning Ordinance

8-8

• (b) Landscaping Alternative . Up to two feet of the front of a parking space as measured from a line parallel to the direction of the bumper of a vehicle using the space may be landscaped with ground cover plants instead of paving.

  • (c) Permeable Paving . Permeable paving, sand-set pavers, supported turf systems, and vegetation must be used in all overflow parking areas and installed in accordance with manufacturer recommended specifications.

  • (d) Turf Grids/Grassy Pavers . Turf grids/grassy pavers must be installed in areas of low traffic or infrequent use wherever feasible.

• 8.2.3.4 Striping and Marking . In all parking facilities with four or more spaces, each parking space must be clearly striped with paint or similar distinguishable material, except that the Director may approve alternate means of marking spaces.

• 8.2.3.5 Perimeter Curbing . A six-inch wide and six-inch high concrete curb must be provided along the outer edge of the parking facility pavement, except where the pavement abuts a fence or wall. Curbs separating landscaped areas from parking areas must be designed to allow stormwater runoff to pass through.

• 8.2.3.6 Separation from On-Site Buildings . Parking areas must be separated from the front and side exterior walls of on-site buildings by walkways a minimum of four feet in width. Commercial buildings with 10,000 square feet or more of gross floor area must be separated from on-site parking on all sides by a walkway a minimum of five feet in width, as well as a planter area at least three feet in width. These requirements do not apply to parking areas containing five or fewer spaces.

• 8.2.3.7 Vertical Clearance . All covered parking must have a minimum vertical clearance of seven feet and six inches except for spaces in parking lifts. The minimum vertical clearance for parking for persons with disabilities must comply with the Building Code.

• 8.2.3.8 Tandem Parking . Required parking may be arranged as tandem spaces, provided that pairs of spaces in tandem are assigned to the same residential unit or to employees of the same nonresidential establishment, or that a full-time parking attendant supervises the parking arrangements during periods of peak demand for the uses served. The required stall width, stall length, and aisle width apply to tandem spaces, except that the required stall length is doubled for each pair of tandem spaces.

• 8.2.3.9 Parking Lifts . Required parking may be provided in parking lifts. If it is necessary to remove one vehicle from the lift to access another vehicle, the parking must comply with the provisions for tandem parking. Parking lifts allowing each vehicle to be independently accessed have no such restrictions. The dimensional standards for 90-degree parking apply to parking lifts, including the requirement for an aisle of 24 feet. Exterior parking lifts must be screened from public view.

• 8.2.3.10 Landscaping and Screening . Uncovered Parking Areas. Landscaping of parking areas must be provided and maintained as follows.

• (a) Landscape Area Required . A minimum of 10 percent of the interior of any parking lot area must be landscaped.

City of Belmont Zoning Ordinance

8-9

• (b) Minimum Planter Dimension . Landscape planters counted toward the required landscape area must be smaller than 25 square feet in area, or four feet in any horizontal dimension, excluding curbing.

• (c) Layout . Landscaped areas must be well-distributed throughout the parking lot area. Parking lot landscaping may be provided in any combination of:

  • (1) Landscaped planting strips at least four feet wide between rows of parking stalls (2) Landscaped planting strips between parking areas and adjacent buildings or internal pedestrian walkways

  • (3) Landscaped islands located between parking stalls or at the ends of rows of parking stalls; and

  • (4) On-site landscaping at the parking lot perimeter.

• (d) Required Landscaped Islands . A landscaped island at least six feet in all interior dimensions and containing at least one 15-gallon-size tree must be provided at each end of each interior row of parking stalls and between every six consecutive parking stalls.

• (e) Landscaped Buffer for Open Parking Adjacent to Right-of-Way . A landscaped area at least five feet wide must be provided between any surface parking area and any property line adjacent to a public street, unless a different dimension is specified in the base district standards applicable to a site.

• (f) Landscaped Buffer for Open Parking Abutting Interior Lot Line . A landscaped area at least three feet wide must be provided between any surface parking area and any adjacent lot for the length of the parking area.

• (g) Trees .

  • (1) Number Required . One for each five parking spaces.

  • (2) Distribution . Trees must be distributed relatively evenly throughout the parking area.

  • (3) Species . Tree species must be selected from a list maintained by the City. (4) Size . All trees must be a minimum 15-gallon size with a one-inch diameter at 48 inches above natural grade.

  • (5) Minimum Planter Size . Any planting area for a tree must have a minimum interior horizontal dimension of five feet. Additional space may be required for some tree species.

(h) Protection of Vegetation .

• (1) Clearance from Vehicles . All required landscaped areas must be designed so that plant materials, at maturity, are protected from vehicle damage by providing a minimum two-foot clearance of low-growing plants where a vehicle overhang is permitted, or by wheel stops set a minimum of two feet from the back of the curb.

• (2) Planters . All required parking lot landscaping must be within planters bounded by a concrete curb at least six inches wide and six inches high. Curbs separating landscaped areas from parking areas shall be designed to allow stormwater runoff to pass through.

• (i) Visibility and Clearance . Landscaping in planters at the end of parking aisles may not obstruct driver’s vision of vehicular and pedestrian cross-traffic. Mature trees must have a foliage clearance maintained at eight feet from the surface of the parking area. Other

City of Belmont Zoning Ordinance 8-10

plant materials located in the interior of a parking lot may not exceed 30 inches in height.