9675.2. - Mobile home placement conditions and specifications.

Every mobile home permit shall be subject to the following conditions. All of the following conditions shall be deemed to be conditions of every mobile home permit granted, whether such conditions are set forth in the mobile home permit or not. The commission, in granting the mobile home permit, may impose additional conditions, but may not change or modify any of the following conditions:

A.

Each mobile home shall have a sloping roof with eave projections of at least twelve (12) inches, constructed with fire-resistant roofing. Such roof must be non-reflective in nature and roll-formed-type metal roofing shall not be used.

B.

Each mobile home shall have an exterior siding of wood, metal or other equivalent material approved by the commission, siding materials used shall be non-reflective in nature.

C.

Each mobile home shall have skirting, constructed of a material designated to correspond to or complement the mobile home's undercarriage from all directions.

D.

Each mobile home shall have an enclosed garage.

E.

Landscaping necessary to achieve the same standards of development as are characteristic of the surrounding properties, as specified by the commission, shall be provided.

F.

Each mobile home shall have front, side and rear yards of not less than those required for the land use district in which it is located.

G.

The granting of a mobile home permit shall not relieve the applicant, his assigns, or his successors in interest from complying with all other applicable statutes, ordinances, rules, and regulations.

(Ord. No. 11-383, § 20, 3-9-2011)