The deck is framed, its ledger bolted to the house, and a written stop work order arrives before the decking goes down. The client was told a small deck needs no permit. The California Residential Code exempts a deck only when four conditions in one sentence all hold, one of them is that the deck is not attached to the house, and the same section says an exemption is not permission to build outside the code.
Key numbers
| Figure | Governs | Section |
|---|---|---|
| 200 square feet | Largest deck area in the exemption | R105.2 |
| 30 inches | Highest deck surface above grade, at any point | R105.2 |
The deck line has four conditions
R105.1 sets the default: the owner or agent "shall first make application to the building official and obtain the required permit." R105.2 then lists work for which "Permits shall not be required for the following:" The deck item reads:
Decks not exceeding 200 square feet (18.58 m²) in area, that are not more than 30 inches (762 mm) above grade at any point, are not attached to a dwelling or townhouse and do not serve the exit door required by Section R318.4.
Area, height, attachment and the exit door sit in one sentence, joined by a single and. A deck that meets three of them is not in the list. The height test reads "above grade at any point", so on a sloped yard the highest point above grade is the one that counts.
Exempt from permit is not exempt from the code
The exemption list opens with a sentence, not an item:
Exemption from permit requirements of this code shall not be deemed to grant authorization for any work to be done in any manner in violation of the provisions of this code or any other laws or ordinances of this jurisdiction.
A freestanding deck that meets all four conditions is still built to the code. R318.5 reads directly on it: decks "shall be positively anchored to the primary structure to resist both vertical and lateral forces or shall be designed to be selfsupporting," and "Attachment shall not be accomplished by use of toenails or nails subject to withdrawal."
The state housing rule in Division I points to the same list: Section 1.8.4.1's first exception is "Work exempt from permits as specified in Chapter 1, Scope and Application, Division II, Administration, Section R105.2."
A cross-reference worth reading twice
The fourth condition points to "Section R318.4." On the library page R318.4 is headed "Vertical egress," and the egress door is in R318.2: "Not less than one egress door shall be provided for each dwelling unit." For a deck bolted to the house, the attachment condition already decides the question, so nothing here turns on the door reference.
What the stop work order does
R114.2: "Upon issuance of a stop work order, the cited work shall immediately cease." The order "shall state the reason for the order and the conditions under which the cited work is authorized to resume." Under R114.4, a person who keeps working "shall be subject to fines established by the authority having jurisdiction."
What to check on the drawings
- The ledger line: framing that connects to the house wall does not meet "are not attached to a dwelling or townhouse".
- The deck outline area, against 200 square feet.
- The deck surface height above the lowest grade under it, against 30 inches.
- Which door the deck serves, read against R318.2 and the R318.4 reference.
- For a freestanding deck: how it is "designed to be selfsupporting".
Currency
R105, R114, R318 and 1.8.4 are printed under "California Residential Code (Title 24, Part 2.5) · 2025 edition · updated 2026-10-24," with the cite line "Effective January 1, 2026." None of the four pages prints an amendment history line. Whether that edition is in force for a given jurisdiction, and whether a local ordinance changes the list, is worth confirming first.
Frequently asked questions
Is a 150-square-foot deck, 18 inches high, exempt if it is attached to the house?
No. The deck line also requires that it is "not attached to a dwelling or townhouse."
Does an exempt deck still have to meet the code?
Yes. R105.2 says exemption "shall not be deemed to grant authorization for any work to be done in any manner in violation of the provisions of this code."
Who receives a stop work order?
R114.2: "the owner of the property, the owner's authorized agent or the person performing the work."
Ask your own project's question in GoCodebook — your first answer is free: https://gocodebook.com/chat?utm_source=blog&utm_medium=article&utm_campaign=v4-02
Sources
- California Residential Code R105.1 — permit required: https://gocodebook.com/library/us/ca/ca-residential-code/chapter-1-administration/section-r105-permits#R105.1
- California Residential Code R105.2 — work exempt from permit: https://gocodebook.com/library/us/ca/ca-residential-code/chapter-1-administration/section-r105-permits#R105.2
- California Residential Code R114.2 — stop work order: https://gocodebook.com/library/us/ca/ca-residential-code/chapter-1-administration/section-r114-stop-work-order#R114.2
- California Residential Code R318.5 — deck attachment (R318.2 egress door on the same page): https://gocodebook.com/library/us/ca/ca-residential-code/chapter-3-building-planning/section-r318-means-of-egress#R318.5
- California Residential Code 1.8.4.1 — HCD permits: https://gocodebook.com/library/us/ca/ca-residential-code/chapter-1-administration/section-1.8.4-permits-fees-applications-and-inspections#1.8.4.1
Code text quoted as published in GoCodebook's library on 2026-11-17. This article does not replace permit review or professional judgment.