Skip to content

Santa Monica · Zoning · OP1

Santa Monica OP1 zoning: height, setbacks and lot size

In Santa Monica's OP1 zone, generally buildings can be up to 20 ft (2 stories) tall, the front setback is 15 ft and the minimum lot size is 4,000 sq ft, with the conditions listed below (Santa Monica code, read October 2026).

Key points

  • Maximum building height: 20 ft (Flat roofs and roofs pitched less than 1:3; pitched roofs have a separate limit (see below))
  • Maximum number of stories: 2 stories
  • Minimum front setback: 15 ft (10 ft if the average of adjacent dwellings is 15 ft or less)
  • Minimum side setback: greater of 4 ft. or 10% of parcel width (Blank walls and walls containing secondary windows on parcels less than 50 ft. in width)
  • Minimum rear setback: 10 ft (4 ft for qualifying ownership or rental projects of 10 or fewer units deemed complete on or after July 1, 2024)
  • Minimum lot size: 4,000 sq ft
  • Maximum floor area ratio (FAR): 1.0
  • Maximum density: 1 unit per parcel

OP1 (Ocean Park Neighborhood District OP1) is a zoning district in Santa Monica. Every value below was read from the Santa Monica Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in OP1

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
20 ft
Applies: Flat roofs and roofs pitched less than 1:3; pitched roofs have a separate limit (see below)
§ 9.09.030 · code text
Table row “Base Standard—Flat Roofs; Roofs Pitched Less Than 1:3”, column “OP1”: 20
Maximum number of stories
2 stories
§ 9.09.030 · code text
Table row “Base Standard”, column “OP1”: 2
Minimum front setback
15 ft
Applies: 10 ft if the average of adjacent dwellings is 15 ft or less
§ 9.09.030 · code text
Table row “Front”, column “OP1”: 15 [10, if average of adjacent dwelling(s) is 15 ft. or less]
Minimum side setback
greater of 4 ft. or 10% of parcel width
Applies: Blank walls and walls containing secondary windows on parcels less than 50 ft. in width
§ 9.09.030 · code text
Table row “Side—Blank walls and walls containing secondary windows on parcels less than 50 ft. in width”, column “OP1”: Greater of 4 ft. or 10% of parcel width
Minimum rear setback
10 ft
Applies: 4 ft for qualifying ownership or rental projects of 10 or fewer units deemed complete on or after July 1, 2024
§ 9.09.030 · code text
Table row “Rear”, column “OP1”: 10
Minimum lot size
4,000 sq ft
§ 9.09.030 · code text
Table row “Minimum Parcel Size (sq. ft.)”, column “OP1”: 4,000
Maximum floor area ratio (FAR)
1.0
§ 9.09.030 · code text
Table row “Base Standard”, column “OP1”: 1.0
Maximum density
1 unit per parcel
§ 9.09.030 · code text
Table row “Maximum Allowable Density”, column “OP1”: 1 unit per parcel

Uses in OP1

Uses the code's use tables allow in OP1, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in OP1:

  • Maximum building height: 27 ft — Pitched roofs § 9.09.030
  • Minimum front setback: 10 ft — If average of adjacent dwelling(s) is 15 ft. or less § 9.09.030
  • Minimum side setback: 8 ft — Walls containing primary windows on parcels less than 50 ft. in width § 9.09.030
  • Minimum side setback: 12 ft — Walls containing primary windows on parcels 50 ft. or more in width § 9.09.030

Not on this page

We did not find a general lot coverage limit for OP1 in the zoning tables we read. The code may still set one elsewhere — check the Santa Monica Municipal Code.

Other Santa Monica zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Santa Monica's OP1 zone?

20 ft (flat roofs and roofs pitched less than 1:3; pitched roofs have a separate limit (see below)) — Santa Monica Municipal Code § 9.09.030.

What is the maximum number of stories in Santa Monica's OP1 zone?

2 stories — Santa Monica Municipal Code § 9.09.030.

What is the minimum front setback in Santa Monica's OP1 zone?

15 ft (10 ft if the average of adjacent dwellings is 15 ft or less) — Santa Monica Municipal Code § 9.09.030.

What is the minimum side setback in Santa Monica's OP1 zone?

greater of 4 ft. or 10% of parcel width (blank walls and walls containing secondary windows on parcels less than 50 ft. in width) — Santa Monica Municipal Code § 9.09.030.

What is the minimum rear setback in Santa Monica's OP1 zone?

10 ft (4 ft for qualifying ownership or rental projects of 10 or fewer units deemed complete on or after July 1, 2024) — Santa Monica Municipal Code § 9.09.030.

General information, not legal advice.

Ask about a Santa Monica property in OP1

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Santa Monica