Skip to content

Lompoc · Zoning · R-3

Lompoc R-3 zoning: height, setbacks and lot size

In Lompoc's R-3 zone, buildings can be up to 35 ft tall, the front setback is 15 ft and the minimum lot size is 7,000 sq ft (Lompoc code, read October 2026).

Key points

  • Maximum building height: 35 ft
  • Minimum front setback: 15 ft
  • Minimum side setback: 5 ft
  • Minimum rear setback: 10 ft
  • Minimum lot size: 7,000 sq ft
  • Maximum lot coverage: 70%
  • Maximum density: 33 dwelling units/net acre

R-3 is a zoning district in Lompoc. Every value below was read from the Lompoc Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in R-3

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
§ 17.208.040 · code text
Table row “Height (max.) - Primary Building”, column “R-3”: 35 ft.
Minimum front setback
15 ft
§ 17.208.040 · code text
Table row “Front (min.)”, column “R-3”: 15 ft.
Minimum side setback
5 ft
§ 17.208.040 · code text
Table row “Side - Interior”, column “R-3”: 5 ft. 4
Minimum rear setback
10 ft
§ 17.208.040 · code text
Table row “Rear (min.)”, column “R-3”: 10 ft. 4
Minimum lot size
7,000 sq ft
§ 17.208.040 · code text
Table row “Lot Area (min.)”, column “R-3”: 7,000 s.f.
Maximum lot coverage
70%
§ 17.208.040 · code text
Table row “Lot Coverage (max.)”, column “R-3”: 70%
Maximum density
33 dwelling units/net acre
§ 17.208.040 · code text
Table row “Density (max.)”, column “R-3”: 33 dwelling units/net acre

Uses in R-3

Uses the code's use tables allow in R-3, or allow with a permit. Each links to its page with the code section.

Not on this page

We did not find a general stories, FAR limit for R-3 in the zoning tables we read. The code may still set one elsewhere — check the Lompoc Municipal Code.

Other Lompoc zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Lompoc's R-3 zone?

35 ft — Lompoc Municipal Code § 17.208.040.

What is the minimum front setback in Lompoc's R-3 zone?

15 ft — Lompoc Municipal Code § 17.208.040.

What is the minimum side setback in Lompoc's R-3 zone?

5 ft — Lompoc Municipal Code § 17.208.040.

What is the minimum rear setback in Lompoc's R-3 zone?

10 ft — Lompoc Municipal Code § 17.208.040.

What is the minimum lot size in Lompoc's R-3 zone?

7,000 sq ft — Lompoc Municipal Code § 17.208.040.

General information, not legal advice.

Ask about a Lompoc property in R-3

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Lompoc