Jurupa Valley · Zoning · R-R
Jurupa Valley R-R zoning: height, setbacks and lot size
In Jurupa Valley's R-R zone, generally the front setback is 20 ft and the minimum lot size is ½ acre, with the conditions listed below (Jurupa Valley code, read October 2026).
Key points
- Minimum front setback: 20 ft
- Minimum side setback: 5 ft (Interior side yard; a street side yard is 10 ft.)
- Minimum rear setback: 10 ft
- Minimum lot size: ½ acre (public utilities: 20,000 sq ft with a minimum average lot width and depth of 100 ft)
R-R (Rural Residential) is a zoning district in Jurupa Valley. Every value below was read from the Jurupa Valley Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in R-R
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Minimum front setback | 20 ft § 9.45.020 · code textFront yard, twenty (20) feet. |
|---|---|
| Minimum side setback | 5 ft Applies: Interior side yard; a street side yard is 10 ft. § 9.45.020 · code textInterior side yard, five (5) feet. |
| Minimum rear setback | 10 ft § 9.45.020 · code textRear yard, ten (10) feet, through lots, rear yard twenty (20) feet. |
| Minimum lot size | ½ acre Applies: public utilities: 20,000 sq ft with a minimum average lot width and depth of 100 ft § 9.45.020 · code textOne-half (½) acre, with a minimum average width of eighty (80) feet, including the area to the center of adjacent streets, shall be the minimum size of any lot except as follows: public utilities: twenty thousand (20,000) square feet with a minimum average lot width and depth of one hundred (100) feet. |
When a different number applies
The code sets other values for particular lots, buildings or locations in R-R:
- Maximum building height: 50 ft — other buildings or structures, unless a greater height is approved pursuant to Section 9.240.370 § 9.45.020
- Maximum building height: 75 ft — building absolute maximum unless a variance is approved pursuant to Section 9.240.270 § 9.45.020
- Maximum building height: 105 ft — other structure absolute maximum unless a variance is approved pursuant to Section 9.240.270 § 9.45.020
- Minimum rear setback: 20 ft — through lots § 9.45.020
- Minimum lot size: 20,000 sq ft — public utilities; minimum average lot width and depth of 100 feet § 9.45.020
Not on this page
We did not find a general height, stories, lot coverage, FAR, density limit for R-R in the zoning tables we read. The code may still set one elsewhere — check the Jurupa Valley Municipal Code.
Other Jurupa Valley zoning districts
Who this affects
Frequently asked questions
What is the minimum front setback in Jurupa Valley's R-R zone?
20 ft — Jurupa Valley Municipal Code § 9.45.020.
What is the minimum side setback in Jurupa Valley's R-R zone?
5 ft (interior side yard; a street side yard is 10 ft) — Jurupa Valley Municipal Code § 9.45.020.
What is the minimum rear setback in Jurupa Valley's R-R zone?
10 ft — Jurupa Valley Municipal Code § 9.45.020.
What is the minimum lot size in Jurupa Valley's R-R zone?
½ acre (public utilities: 20,000 sq ft with a minimum average lot width and depth of 100 ft) — Jurupa Valley Municipal Code § 9.45.020.
General information, not legal advice.
Ask about a Jurupa Valley property in R-R
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question