CEBC · California Existing Building Code
Alterations — Level 1, Level 2, Level 3 (technical requirements for each alteration level; Chapters 7–9)
Chapters 7–9 of the CEBC set the technical rules for Level 1 (component replacement), Level 2 (space reconfiguration ≤50% or system extension) and Level 3 (work area >50%) alterations, with the level definitions in §602–§604 and cross‑references requiring lower‑level provisions to apply to higher levels.
Last reviewed: July 6, 2026
Overview
This part of the California Existing Building Code (CEBC) groups the technical requirements that apply when existing buildings are altered under the Work Area Method. The three alteration levels are distinguished by scope and effect: Level 1 covers simple replacement or covering of existing materials and fixtures, Level 2 covers space reconfiguration or system extension up to 50% of the building area, and Level 3 applies where the work area exceeds 50% of the building area. The classification rules and the basic scope language appear in Sections §602, §603 and §604 of Chapter 6; see §602.1 for Level 1, §603.1 for Level 2 and §604.1 for Level 3 .
Chapters 7–9 contain the technical prescriptions tied to each level: Chapter 7 (Level 1) addresses building elements, fire protection, means of egress, reroofing, structural and energy items for non‑reconfiguring work; Chapter 8 (Level 2) adds requirements triggered by space reconfiguration or new/extended systems; and Chapter 9 (Level 3) expands those requirements where alterations exceed half the building area and may require improvements beyond the work area. See the chapter overviews and table of contents for the topics covered in each chapter . In practice Level 2 and Level 3 work must also meet the Level 1 provisions and, respectively, Chapters 7 and 8 in addition to their own chapter requirements (§603.2, §604.2) .
In this section
Code references
Grounded in the retrieved California Existing Building Code — click a citation to read the verbatim passage:
CEBC § 1.10.1 High relevance — show source text
Chapter 5A Prescriptive Compliance Method.
Chapter 5A provides details for the prescriptive compliance method for alteration, addition and change of occupancy of existing build- ings and structures regulated by the Department of Health Care Access and Information/Office of Statewide Hospital Planning and Development, which include hospitals and correctional treatment centers (applications listed in Sections 1.10.1 (OSHPD 1).
Chapter 6 Classification of Work.
Chapter 6 provides an overview of the Work Area Method and defines the different classifications of work including alterations, change of occupancy, additions and historic buildings. Detailed requirements for all of these are given in subsequent Chapters 7 through 11.
Chapter 7 Alterations—Level 1.
Chapter 7 provides the technical requirements for those existing buildings that undergo Level 1 alterations as described in Section 602, which includes replacement or covering of existing materials, elements, equipment or fixtures using new materials for the same purpose. This chapter is distinguished from Chapters 8 and 9 by only involving replacement of building components with new components with no reconfiguration of space.
Chapter 8 Alterations—Level 2.
A Level 2 alteration is an alteration involving space reconfiguration that could be up to and including 50 percent of the area of the building or addition of a new building system. Level 2 alterations also include the extension or addition of any system or equipment. The purpose of Chapter 8 is to provide detailed requirements and provisions to identify the required improvements in the existing building elements, means of egress, fire protection, structural systems, energy efficiency, and other building systems include electrical, mechanical and plumbing when a building is being altered.
Chapter 9 Alterations—Level 3.
Chapter 9 provides the technical requirements for those existing buildings that undergo Level 3 alterations. Level 3 alterations are those involving alterations that cover 50 percent of the aggregate area of the building. Under certain situations, this chapter also intends to improve the safety of certain building features beyond the work area and in other parts of the building where no alteration work might be taking place.
Chapter 10 Change of Occupancy.
The purpose of Chapter 10 is to address existing buildings that are subject to a change of occupancy. This chapter is an assembly of requirements to upgrade safety without having to comply fully as a new building. A change of occupancy classification is considered a change of occupancy, however, it will involve a higher level of regulation since the use of the building has made a more significant change.
2025 CALIFORNIA EXISTING BUILDING CODE xiii
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
Chapter 11 Additions.
Chapter 11 provides the requirements for additions, which are considered new construction. The requirements focus on safely integrating the addition with the existing building. This includes issues such as limiting the overall height and area of the building where the addition is not separated by a fire wall.
Chapter 12 Historic Buildings —Reserved
Chapter 12 is not adopted by the State of California. Historic buildings and structures shall comply with Part 8, Title 24, California Code of Regulations.
Chapter 13 Performance Compliance Methods.
Chapter 13 allows for existing buildings to be evaluated to show that alterations or a change of occupancy, while not meeting new construction requirements, will provide a level of safety to demonstrate compliance. Provisions are based on a numerical scoring system involving 21 safety parameters where, when evaluated, such buildings must meet a minimum overall safety score.
CEBC § 701.1 High relevance — show source text
Adopting Agency BSC BSC-
CGSFM HCD Col6 Col7 DSA Col9 Col10 OSHPD Col12 Col13 Col14 Col15 Col16 Col17 BSCC DPH AGR DWR CEC CA SL SLC Adopting Agency BSC BSC-
CGSFM 1 2 1/AC AC SS SS/CC 1 1R 2 3 4 5 6 6 6 6 6 6 6 6 6 Adopt Entire Chapter X X Adopt Entire Chapter as
amended (amended
sections listed below)X Adopt only those sections
that are listed belowChapter / Section 701.1 X 702.7 X 703.2 X 703.2.1 X 703.2.2 X 703.3 X 704.3 † † The state agency does not adopt sections identified with the following symbol: The Office of the State Fire Marshal’s adoption of this chapter or individual sections is applicable to structures regulated by other state agencies pursuant to Section 1.11.
2025 CALIFORNIA EXISTING BUILDING CODE 7-1
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
7-2 2025 CALIFORNIA EXISTING BUILDING CODE
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
7 ALTERATIONS—LEVEL 1
User notes:
About this chapter: Chapter 7 provides the technical requirements for those existing buildings that undergo Level 1 alterations as described in Section 603, which includes replacement or covering of existing materials, elements, equipment or fixtures using new materials for the same purpose. This chapter, similar to other chapters of this code, covers all building-related subjects, such as structural, mechanical, plumbing, electrical and accessibility as well as the fire and life safety issues when the alterations are classified as Level 1. The purpose of this chapter is to provide detailed requirements and provisions to identify the required improvements in the existing building elements, building spaces and building structural system. This chapter is distinguished from Chapters 8 and 9 by involving only replacement of building components with new components. In contrast, Level 2 alterations involve more space reconfiguration, and Level 3 alterations involve more extensive space reconfiguration, exceeding 50 percent of the building area.
SECTION 701—GENERAL
CEBC § 601.1.1 High relevance — show source text
601.1.1 Compliance with other alternatives. Alterations, additions and changes of occupancy to existing structures shall comply with the provisions of Chapters 7 through 11 or with one of the alternatives provided in Section 301.3.
601.2 Work area. The work area, as defined in Chapter 2, shall be identified on the construction documents.
SECTION 602—ALTERATION—LEVEL 1
602.1 Scope. Level 1 alterations include the removal and replacement or the covering of existing materials, elements, equipment or fixtures using new materials, elements, equipment or fixtures that serve the same purpose.
602.2 Application. Level 1 alterations shall comply with the provisions of Chapter 7.
SECTION 603—ALTERATION—LEVEL 2
603.1 Scope. Level 2 alterations include the addition or elimination of any door or window, the reconfiguration or extension of any system, or the installation of any additional equipment, and shall apply where the work area is equal to or less than 50 percent of the building area.
Exception: The movement or addition of nonfixed and movable fixtures, cases, racks, counters and partitions not over 5 feet 9 inches (1753 mm) in height shall not be considered a Level 2 alteration.
603.2 Application. Level 2 alterations shall comply with the provisions of Chapter 7 for Level 1 alterations as well as the provisions of Chapter 8.
SECTION 604—ALTERATION—LEVEL 3
604.1 Scope. Level 3 alterations apply where the work area exceeds 50 percent of the building area.
604.2 Application. Level 3 alterations shall comply with the provisions of Chapters 7 and 8 for Level 1 and 2 alterations, respectively, as well as the provisions of Chapter 9.
SECTION 605—CHANGE OF OCCUPANCY
605.1 Scope. Change of occupancy provisions apply where the activity is classified as a change of occupancy as defined in Chapter 2.
605.2 Application. Changes of occupancy shall comply with the provisions of Chapter 10.
SECTION 606—ADDITIONS
606.1 Scope. Provisions for additions shall apply where work is classified as an addition as defined in Chapter 2.
606.2 Application. Additions to existing buildings shall comply with the provisions of Chapter 11.
SECTION 607—HISTORIC BUILDINGS
607.1 Scope. The provisions of the California Historical Building Code (Part 8, Title 24, C.C.R) shall apply to qualified historical buildings or properties.
2025 CALIFORNIA EXISTING BUILDING CODE 6-3
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
6-4 2025 CALIFORNIA EXISTING BUILDING CODE
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
CALIFORNIA EXISTING BUILDING CODE – MATRIX ADOPTION TABLE
CHAPTER 7 – ALTERATIONS—LEVEL 1
(Matrix Adoption Tables are nonregulatory, intended only as an aid to the code user. See Chapter 1 for state agency authority and building applications.)
CEBC § 601.1.1 High relevance — show source text
1|||X|||||||||||||||||||||| |601.1.1|||X|||||||||||||||||||||| |607.1|||X||||||||||||||||||||||
The state agency does not adopt sections identified with the following symbol: The Office of the State Fire Marshal’s adoption of this chapter or individual sections is applicable to structures regulated by other state agencies pursuant to Section 1.11.
2025 CALIFORNIA EXISTING BUILDING CODE 6-1
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
6-2 2025 CALIFORNIA EXISTING BUILDING CODE
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
6 CLASSIFICATION OF WORK
User notes:
About this chapter: Chapter 6 provides an overview of the Work Area Method available as an option for rehabilitation of a building. The chapter defines the different classifications of alterations and provides general requirements for alterations, change of occupancy, additions and historic buildings. Detailed requirements for all of these are given in Chapters 7 through 11.
SECTION 601—GENERAL
601.1 Scope. The provisions of this chapter shall be used in conjunction with Chapters 7 through 11 and shall apply to the alteration, addition and change of occupancy of existing structures, as referenced in Section 301.3.2. The work performed on an existing building shall be classified in accordance with this chapter. Historic buildings and structures shall comply with Part 8, Title 24, C.C.R.
Exceptions: 1. [SFM] Use of Chapters 6-11 is not permitted in H, I and L, R-2.1, R-3.1 occupancies and high-rise buildings. 2. [BSC] Use of Chapters 6-11 is not permitted in occupancies, buildings and applications regulated by Building Standards Commission and listed in Section 1.2.
601.1.1 Compliance with other alternatives. Alterations, additions and changes of occupancy to existing structures shall comply with the provisions of Chapters 7 through 11 or with one of the alternatives provided in Section 301.3.
601.2 Work area. The work area, as defined in Chapter 2, shall be identified on the construction documents.
SECTION 602—ALTERATION—LEVEL 1
602.1 Scope. Level 1 alterations include the removal and replacement or the covering of existing materials, elements, equipment or fixtures using new materials, elements, equipment or fixtures that serve the same purpose.
602.2 Application. Level 1 alterations shall comply with the provisions of Chapter 7.
SECTION 603—ALTERATION—LEVEL 2
603.1 Scope. Level 2 alterations include the addition or elimination of any door or window, the reconfiguration or extension of any system, or the installation of any additional equipment, and shall apply where the work area is equal to or less than 50 percent of the building area.
Exception: The movement or addition of nonfixed and movable fixtures, cases, racks, counters and partitions not over 5 feet 9 inches (1753 mm) in height shall not be considered a Level 2 alteration.
603.2 Application. Level 2 alterations shall comply with the provisions of Chapter 7 for Level 1 alterations as well as the provisions of Chapter 8.
SECTION 604—ALTERATION—LEVEL 3
CEBC § 1.10.1 High relevance — show source text
xii 2025 CALIFORNIA EXISTING BUILDING CODE
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
Chapter 3 Provisions for All Compliance Methods.
Chapter 3 guides the use of the three compliance methods of the CEBC and provides requirements that apply globally. The globally applicable requirement include general requirements related to buildings materials and other applicable codes, storm shelters, structural loads, in-situ load tests, accessibility, smoke alarms, carbon monoxide detection and exterior wall coverings.
Chapter 3A Provisions for All Compliance Methods.
Chapter 3A controls the compliance options for alteration, repair, addition, evaluation and change of occupancy of existing structures regulated by the Department of Health Care Access and Information/Office of Statewide Hospital Planning and Development, which include hospitals and correctional treatment centers (applications listed in Sections 1.10.1 (OSHPD 1).
Chapter 4 Repairs.
Chapter 4, a chapter independent of the three compliance methods, governs the repair of existing buildings. The provisions define conditions under which repairs may be made using materials and methods like those of the original construction or the extent to which repairs must comply with requirements for new buildings.
Chapter 4A Repairs.
Chapter 4A governs the repair of existing buildings regulated by the Department of Health Care Access and Information/Office of State- wide Hospital Planning and Development, which include hospitals and correctional treatment centers (applications listed in Sections 1.10.1 (OSHPD 1).
Chapter 5 Prescriptive Compliance Method.
Chapter 5 provides one of the three main options of compliance available in the CEBC for buildings and structures undergoing alteration, addition or change of occupancy. The base requirements are more administrative in nature. The structural triggers for upgrades are consistent with the Work Area Method.
Chapter 5A Prescriptive Compliance Method.
Chapter 5A provides details for the prescriptive compliance method for alteration, addition and change of occupancy of existing build- ings and structures regulated by the Department of Health Care Access and Information/Office of Statewide Hospital Planning and Development, which include hospitals and correctional treatment centers (applications listed in Sections 1.10.1 (OSHPD 1).
Chapter 6 Classification of Work.
Chapter 6 provides an overview of the Work Area Method and defines the different classifications of work including alterations, change of occupancy, additions and historic buildings. Detailed requirements for all of these are given in subsequent Chapters 7 through 11.
Chapter 7 Alterations—Level 1.
Chapter 7 provides the technical requirements for those existing buildings that undergo Level 1 alterations as described in Section 602, which includes replacement or covering of existing materials, elements, equipment or fixtures using new materials for the same purpose. This chapter is distinguished from Chapters 8 and 9 by only involving replacement of building components with new components with no reconfiguration of space.
Chapter 8 Alterations—Level 2.
A Level 2 alteration is an alteration involving space reconfiguration that could be up to and including 50 percent of the area of the building or addition of a new building system. Level 2 alterations also include the extension or addition of any system or equipment. The purpose of Chapter 8 is to provide detailed requirements and provisions to identify the required improvements in the existing building elements, means of egress, fire protection, structural systems, energy efficiency, and other building systems include electrical, mechanical and plumbing when a building is being altered.
Chapter 9 Alterations—Level 3.
CEBC § 2.1 High relevance — show source text
2.1 Exceptions 4 – 9 and
13-14||||†|†|||||||||||||||||||| |802.3||||†|†|||||||||||||||||||| |803.2|||X|||||||||||||||||||||| |803.2.3||||†|†|||||||||||||||||||| |803.3_Reserved_|||X|||||||||||||||||||||| |803.4|||X|||||||||||||||||||||| |803.4.1|||X|||||||||||||||||||||| |804.3_Reserved_|||X|||||||||||||||||||||| |804.5|||X|||||||||||||||||||||| |804.5.1.2|||X|||||||||||||||||||||| |804.5.1.2.1|||X|||||||||||||||||||||| |804.5.3||||†|†|||||||||||||||||||| |804.6.3|||X|||||||||||||||||||||| |804.6.4||||†|†|||||||||||||||||||| |804.6.4.1|||X|||||||||||||||||||||| |804.7.1|||X|||||||||||||||||||||| |804.7.2|||X|||||||||||||||||||||| |804.8|||X|||||||||||||||||||||| |804.12||||†|†|||||||||||||||||||| |804.13|||X|||||||||||||||||||||| |804.13.1|||X|†|†|||||||||||||||||||| |804.14.2 Exceptions||||†|†|||||||||||||||||||| |806.2|||X|†|†|||||||||||||||||||| |806.3|||X|†|†|||||||||||||||||||| |808_Reserved_|||X||||||||||||||||||||||The state agency does not adopt sections identified with the following symbol: The Office of the State Fire Marshal’s adoption of this chapter or individual sections is applicable to structures regulated by other state agencies pursuant to Section 1.11.
2025 CALIFORNIA EXISTING BUILDING CODE 8-1
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
8-2 2025 CALIFORNIA EXISTING BUILDING CODE
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
8 ALTERATIONS—LEVEL 2
User notes:
About this chapter: Like Chapter 7, the purpose of this chapter is to provide detailed requirements and provisions to identify the required improvements in the existing building elements, building spaces and building structural system when a building is being altered. This chapter is distinguished from Chapters 7 and 9 by involving space reconfiguration that could be up to and including 50 percent of the area of the building. In contrast, Level 1 alterations (Chapter 7) do not involve space reconfiguration, and Level 3 alterations (Chapter 9) involve extensive space reconfiguration that exceeds 50 percent of the building area. Depending on the nature of alteration work, its location within the building, and whether it encompasses one or more tenants, improvements and upgrades could be required for the open floor penetrations, sprinkler system or the installation of additional means of egress such as stairs or fire escapes.
SECTION 801—GENERAL
801.1 Scope. Level 2 alterations as described in Section 603 shall comply with the requirements of this chapter.
CEBC § 7-3 High relevance — show source text
702 Building Elements and Materials . . . . . . . . . . . . . . . . . 7-3
703 Fire Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
704 Means of Egress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
705 Reroofing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
706 Structural. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
707 Reserved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
708 Energy Conservation. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
CHAPTER 8 ALTERATIONS—LEVEL 2 . . . . . . . . . . . . . . . . . .8-3
801 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3
802 Building Elements and Materials . . . . . . . . . . . . . . . . . 8-3
803 Fire Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5
804 Means of Egress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5
805 Structural. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
806 Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10
807 Mechanical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10
808 Reserved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10
809 Energy Conservation. . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10
CHAPTER 9 ALTERATIONS—LEVEL 3 . . . . . . . . . . . . . . . . . .9-3
901 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3
CEBC § 801.2 High relevance — show source text
801.2 Alteration Level 1 compliance. In addition to the requirements of this chapter, all work shall comply with the requirements of Chapter 7.
801.3 System installations. Requirements related to work area are not applicable where the Level 2 alterations are limited solely to one or more of the following:
- Mechanical systems, electrical systems, fire protection systems and abatement of hazardous materials.
- Windows, hardware, operating controls, electrical outlets and signs.
- Alterations undertaken for the primary purpose of increasing the accessibility of a facility.
801.4 Compliance. New construction elements, components, systems and spaces shall comply with the requirements of the Califor- nia Building Code .
Exceptions:
Where windows are added they are not required to comply with the light and ventilation requirements of the California Building Code .
Newly installed electrical equipment shall comply with the requirements of Section 806.
The length of dead-end corridors in newly constructed spaces shall only be required to comply with the provisions of Section 804.8.
The minimum ceiling height of the newly created habitable and occupiable spaces and corridors shall be 7 feet (2134 mm).
Where provided in below-grade transportation stations, existing and new escalators shall be permitted to have a clear width of less than 32 inches (815 mm).
New structural members and connections shall be permitted to comply with alternative design criteria in accordance with Section 302.
SECTION 802—BUILDING ELEMENTS AND MATERIALS
802.1 Scope. The requirements of this section are limited to work areas in which Level 2 alterations are being performed and shall apply beyond the work area where specified.
802.2 Vertical openings. Existing vertical openings shall comply with the provisions of Sections 802.2.1, 802.2.2 and 802.2.3.
802.2.1 Existing vertical openings. Existing interior vertical openings connecting two or more floors shall be enclosed with approved assemblies having a fire-resistance rating of not less than 1 hour with approved opening protectives.
Exceptions:
- Where vertical opening enclosure is not required by the California Building Code or the California Fire Code .
- Interior vertical openings other than stairways may be blocked at the floor and ceiling of the work area by installation of not less than 2 inches (51 mm) of solid wood or equivalent construction.
- The enclosure shall not be required where: 3.1. Connecting the main floor and mezzanines; or 3.2. All of the following conditions are met: 3.2.1. The communicating area has a low-hazard occupancy or has a moderate-hazard occupancy that is protected throughout by an automatic sprinkler system.
3.2.2. The lowest or next-to-the-lowest level is a street floor.
2025 CALIFORNIA EXISTING BUILDING CODE 8-3
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
ALTERATIONS—LEVEL 2
CEBC § 2.2 High relevance — show source text
2.2_|||X|||||||||||||||||||||| |703.3|||X|||||||||||||||||||||| |704.3||||†|†||||||||||||||||||||
The state agency does not adopt sections identified with the following symbol: The Office of the State Fire Marshal’s adoption of this chapter or individual sections is applicable to structures regulated by other state agencies pursuant to Section 1.11.
2025 CALIFORNIA EXISTING BUILDING CODE 7-1
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
7-2 2025 CALIFORNIA EXISTING BUILDING CODE
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
7 ALTERATIONS—LEVEL 1
User notes:
About this chapter: Chapter 7 provides the technical requirements for those existing buildings that undergo Level 1 alterations as described in Section 603, which includes replacement or covering of existing materials, elements, equipment or fixtures using new materials for the same purpose. This chapter, similar to other chapters of this code, covers all building-related subjects, such as structural, mechanical, plumbing, electrical and accessibility as well as the fire and life safety issues when the alterations are classified as Level 1. The purpose of this chapter is to provide detailed requirements and provisions to identify the required improvements in the existing building elements, building spaces and building structural system. This chapter is distinguished from Chapters 8 and 9 by involving only replacement of building components with new components. In contrast, Level 2 alterations involve more space reconfiguration, and Level 3 alterations involve more extensive space reconfiguration, exceeding 50 percent of the building area.
SECTION 701—GENERAL
701.1 Scope. Level 1 alterations as described in Section 602 shall comply with the requirements of this chapter. Alterations to historic buildings and structures shall comply with Part 8, Title 24, C.C.R.
701.2 Conformance. An existing building or portion thereof shall not be altered such that the building becomes less safe than its existing condition.
Exception: Where the current level of safety or sanitation is proposed to be reduced, the portion altered shall conform to the requirements of the California Building Code .
[BS] 701.3 Flood hazard areas. In flood hazard areas, alterations that constitute substantial improvement shall require that the building comply with Section 1612 of the California Building Code, or Section R306 of the California Residential Code, as applicable.
SECTION 702—BUILDING ELEMENTS AND MATERIALS
702.1 Interior finishes. Newly installed interior wall and ceiling finishes shall comply with Chapter 8 of the California Building Code .
702.2 Interior floor finish. New interior floor finish, including new carpeting used as an interior floor finish material, shall comply with Section 804 of the California Building Code .
702.3 Interior trim. Newly installed interior trim materials shall comply with Section 806 of the California Building Code .
702.4 Window fall prevention. In Group R-2 or R-3 buildings containing dwelling units and one- and two-family dwellings and townhouses regulated by the California Residential Code, window opening control devices or other window fall prevention devices complying with ASTM F2090 shall be installed where an existing window is replaced and where all of the following apply to the replacement window:
- The window is operable.
- One of the following applies: 2.1.
CEBC § 8.2.1.2 High relevance — show source text
RESOURCE A-120 2025 CALIFORNIA EXISTING BUILDING CODE
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
Accessibility 1.8.2.1.2, 1.9.1, 104.2.4, 306, 801.1, 901.2, 1101.2, 1508, Appendix B Additions Chapter 11, 101.2, 101.3, 101.4, 104.3, 104.3.1, 104.2.4.1, 106.2.3, 109.3.3, 113.2, 115.5, 202, 301.1, 301.3, 302.2, 302.2.1, 303.2, 304.1, 304.2, 307.1, 308.1, 309, 501.1, 502, 601.1, 606, 1301.1, 1301.1.1, 1302.1, 1302.1.3, 1303.1, 1304.1.1, 1304.1.3, 1501.3, 1505.2 Administration Chapter 1 Alterations Chapter 7, Chapter 8, Chapter 9, 101.2, 101.3, 101.4, 101.6, 104.3, 104.3.1, 104.3.2, 104.2.4.1, 105.1.1, 105.1.2, 105.2.2, 105.2.3, 106.2.3, 106.2.6, 108.5, 110.2, 113.2, 115.5, 202, 301.1, 301.3, 302.2, 302.2.1, 302.4, 304, 307.1, 308.1, 309.1, 501.1, 501.1.1, 502.1, 502.3, 502.4, 503, 504.1, 601.1, 602, 603, 604, 1101.3, 1103.1, 1103.2, 1301.1, 1301.1.1, 1302.1, 1302.1.4, 1302.1.6, 1303.1, 1304.1.1, 1304.1.3, 1307.1.1, 1401.2, 1501.3, 1504.1, 1505.2, A105.2, A304.1.1, A402.1, A403.2 Level 1 Chapter 7, 104.3.2, 602, 603.2, 604.2, 801.2 Level 2 Chapter 8, 106.2.3, 505.2, 603 Level 3 Chapter 9, 106.2.3, 604, 1011.4 Alternative Materials, Design and Methods of Construction 104.2.3 Ambulatory Care Facility 202, 302.2.1, 406.1.2, 408.3, 501.3, 503.15, 503.17,
CEBC § 1.11. Medium relevance — show source text
The state agency does not adopt sections identified with the following symbol: The Office of the State Fire Marshal’s adoption of this chapter or individual sections is applicable to structures regulated by other state agencies pursuant to Section 1.11.
2025 CALIFORNIA EXISTING BUILDING CODE 8-1
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
8-2 2025 CALIFORNIA EXISTING BUILDING CODE
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
8 ALTERATIONS—LEVEL 2
User notes:
About this chapter: Like Chapter 7, the purpose of this chapter is to provide detailed requirements and provisions to identify the required improvements in the existing building elements, building spaces and building structural system when a building is being altered. This chapter is distinguished from Chapters 7 and 9 by involving space reconfiguration that could be up to and including 50 percent of the area of the building. In contrast, Level 1 alterations (Chapter 7) do not involve space reconfiguration, and Level 3 alterations (Chapter 9) involve extensive space reconfiguration that exceeds 50 percent of the building area. Depending on the nature of alteration work, its location within the building, and whether it encompasses one or more tenants, improvements and upgrades could be required for the open floor penetrations, sprinkler system or the installation of additional means of egress such as stairs or fire escapes.
SECTION 801—GENERAL
801.1 Scope. Level 2 alterations as described in Section 603 shall comply with the requirements of this chapter.
Exception: Buildings in which the reconfiguration is exclusively the result of compliance with the accessibility requirements of Section 306.7.1 shall be permitted to comply with Chapter 7.
801.2 Alteration Level 1 compliance. In addition to the requirements of this chapter, all work shall comply with the requirements of Chapter 7.
801.3 System installations. Requirements related to work area are not applicable where the Level 2 alterations are limited solely to one or more of the following:
- Mechanical systems, electrical systems, fire protection systems and abatement of hazardous materials.
- Windows, hardware, operating controls, electrical outlets and signs.
- Alterations undertaken for the primary purpose of increasing the accessibility of a facility.
801.4 Compliance. New construction elements, components, systems and spaces shall comply with the requirements of the Califor- nia Building Code .
Exceptions:
Where windows are added they are not required to comply with the light and ventilation requirements of the California Building Code .
Newly installed electrical equipment shall comply with the requirements of Section 806.
The length of dead-end corridors in newly constructed spaces shall only be required to comply with the provisions of Section 804.8.
The minimum ceiling height of the newly created habitable and occupiable spaces and corridors shall be 7 feet (2134 mm).
Where provided in below-grade transportation stations, existing and new escalators shall be permitted to have a clear width of less than 32 inches (815 mm).
New structural members and connections shall be permitted to comply with alternative design criteria in accordance with Section 302.
SECTION 802—BUILDING ELEMENTS AND MATERIALS
802.1 Scope. The requirements of this section are limited to work areas in which Level 2 alterations are being performed and shall apply beyond the work area where specified.
CEBC § 604.1 Medium relevance — show source text
604.1 Scope. Level 3 alterations apply where the work area exceeds 50 percent of the building area.
604.2 Application. Level 3 alterations shall comply with the provisions of Chapters 7 and 8 for Level 1 and 2 alterations, respectively, as well as the provisions of Chapter 9.
SECTION 605—CHANGE OF OCCUPANCY
605.1 Scope. Change of occupancy provisions apply where the activity is classified as a change of occupancy as defined in Chapter 2.
605.2 Application. Changes of occupancy shall comply with the provisions of Chapter 10.
SECTION 606—ADDITIONS
606.1 Scope. Provisions for additions shall apply where work is classified as an addition as defined in Chapter 2.
606.2 Application. Additions to existing buildings shall comply with the provisions of Chapter 11.
SECTION 607—HISTORIC BUILDINGS
607.1 Scope. The provisions of the California Historical Building Code (Part 8, Title 24, C.C.R) shall apply to qualified historical buildings or properties.
2025 CALIFORNIA EXISTING BUILDING CODE 6-3
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
6-4 2025 CALIFORNIA EXISTING BUILDING CODE
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
CALIFORNIA EXISTING BUILDING CODE – MATRIX ADOPTION TABLE
CHAPTER 7 – ALTERATIONS—LEVEL 1
(Matrix Adoption Tables are nonregulatory, intended only as an aid to the code user. See Chapter 1 for state agency authority and building applications.)
Adopting Agency BSC BSC-
CGSFM HCD Col6 Col7 DSA Col9 Col10 OSHPD Col12 Col13 Col14 Col15 Col16 Col17 BSCC DPH AGR DWR CEC CA SL SLC Adopting Agency BSC BSC-
CGSFM 1 2 1/AC AC SS SS/CC 1 1R 2 3 4 5 6 6 6 6 6 6 6 6 6 Adopt Entire Chapter X X Adopt Entire Chapter as
amended (amended
sections listed below)X Adopt only those sections
that are listed belowChapter / Section 701.1 X 702.7 X 703.2 X 703.2.1 X _703.2.
Frequently asked questions
How do I know whether my project is Level 1, Level 2 or Level 3?
Level is determined by the defined "work area" and the nature of the work. §602.1 defines Level 1 as removal/replacement or covering of existing materials or fixtures; §603.1 defines Level 2 as reconfiguration or system extension where the work area is equal to or less than 50% of the building area; and §604.1 defines Level 3 where the work area exceeds 50% of the building area .
Must Level 2 or 3 projects also comply with Chapter 7?
Yes. Chapter 8 requires compliance with Chapter 7 in addition to its own provisions for Level 2 work, and Chapter 9 requires compliance with Chapters 7 and 8 for Level 3 work (see §603.2 and §604.2) .
What general topics do Chapters 7–9 cover?
Chapters 7–9 address building elements and materials, fire protection, means of egress, structural requirements, energy conservation and—where applicable—electrical, mechanical and plumbing system requirements tied to the scope of work for each level; the chapter table of contents summarizes these sections for quick reference .
More in California Existing Building Code
- Administration and Definitions (Scope, enforcement, code official duties, definitions)
- Provisions for All Compliance Methods (general requirements that apply to all compliance options; Chapter 3 / 3A)
- Seismic retrofit and evaluation (Appendix A and seismic provisions/sections for evaluation and retrofit)
- Referenced Standards and Appendices (Chapter 16 and Appendices A–E, Resource A)
- Repairs (Chapter 4 — repair-specific rules for materials, means of egress, structural, MEP, etc.)
- Alterations — Level 1, Level 2, Level 3 (technical requirements for each alteration level; Chapters 7–9)
- Change of Occupancy and Additions (requirements for occupancy changes and additions; Chapters 10–11)
- Compliance Methods — Prescriptive, Work Area, Performance (Chapters 5, 6–11, 13)
- Relocated Buildings (requirements for buildings moved or relocated; Chapter 14)
- Construction Safeguards (site safety, means of egress and life-safety during construction; Chapter 15)
Ask about the CEBC
Get cited, plain-English answers on the California Existing Building Code for your project — any code section, any scenario.
Start Free TrialRelated in the CEBC
Administration and Definitions (Scope, enforcement, code official duties, definitions)
Provisions for All Compliance Methods (general requirements that apply to all compliance options; Chapter 3 / 3A)
Repairs (Chapter 4 — repair-specific rules for materials, means of egress, structural, MEP, etc.)
Compliance Methods — Prescriptive, Work Area, Performance (Chapters 5, 6–11, 13)
Change of Occupancy and Additions (requirements for occupancy changes and additions; Chapters 10–11)
Construction Safeguards (site safety, means of egress and life-safety during construction; Chapter 15)
Relocated Buildings (requirements for buildings moved or relocated; Chapter 14)
Referenced Standards and Appendices (Chapter 16 and Appendices A–E, Resource A)
California Existing Building Code