Section 1. Additional Instructions for Form Printers

.01 If magnetic diskette or electronic media is not used for filing with the SSA, the substitute copies of Forms W-2 (either red-ink or laser-printed) should be assembled in the same order as the official IRS Forms W-2. Copy A should be first, followed sequentially by perforated sets (Copies 1, B, C, 2, and D).

.02 The substitute form to be filed by the employer with the SSA must carry the designation “Copy A.”

Note. Magnetic diskette/electronic filers do not submit either red-ink or laser-printed paper Form W-2 (Copy A) or Form W-3 to the SSA.

.03 Substitute forms (red-ink or laser-printed) do not require a copy to be retained by employers (Copy D of Form W-2). However, employers must be prepared to verify or duplicate the information if it is requested by the IRS or the SSA. Paper filers who do not keep a Form W-2 (Copy D) should be able to generate a facsimile of Form W-2 (Copy A) in case of loss.

.04 Except for copies in the official assembly, no additional copies that may be prepared by employers should be placed ahead of Form W-2 (Copy C) “For EMPLOYEE'S RECORDS.”

.05 Instructions similar to those contained on the back of Copies B and C of the official IRS Form W-2 must be provided to each employee. These instructions may be printed on the back of the substitute Copies B and C or may be provided to employees on a separate statement. Do not print these instructions on the back of Copy 1 or 2 that is to be filed with the employee's state, city, or local income tax return. Any Forms W-2 (Copy A) and W-3 that are filed with the SSA must have no printing on the reverse side. Instructions similar to those provided as part of the IRS official forms must be provided as part of any substitute Form W-2 (Copy A) or Form W-3.