If you selected “B” for a replacement file, select one of the following:

“A” Replacement Files For This System

This option is to replace an original/correction file that was submitted electronically on this system but was bad and needs to be replaced. Select the file to be replaced. “B” Magnetic media replacement files

Enter the alpha character from Form 9267, Media Tracking Slip, that was sent with the request for replacement file.

Press ENTER to continue or “e” to exit.

Enter your 10 digit PIN and press ENTER .

Choose one of the following protocols (Hyperterminal is normally set to Zmodem by default):

X - Xmodem Y - Ymodem Z - Zmodem (Zmodem will normally give you the fastest transfer rate.)

At this point, you must start the upload from your PC. To send a file:

Go to the hyperterminal menu bar. Click on Transfer . Click on Send file . (Be sure the protocol selected matches the protocol selected earlier. If Zmodem was selected, set to Zmodem not Zmodem with crash recovery.) A box will appear titled “Send File” .

Enter the drive/path/filename or click on Browse to locate your file. Click on Send .