Chapter 17.16 — RESIDENTIAL MEDIUM-DENSITY (R2) ZONE

17.16.010 - Purpose.¶

The residential medium-density (R2) zone is intended to stabilize and protect residential characteristics, and to promote intermediate density residential development.

(Ord. 82-4 §3 (part)).

(Ord. No. 18-03, 9-26-18)

17.16.020 - Principal permitted uses.¶

The following are principal permitted uses in the R2 zone:

2	(a)	Single-family residences;
2	(b)	Two-family residences.
2	(c)	Group Residential;
2	(f)	Supportive housing;
2	(g)	Transitional housing;
2	(j)	Farm worker housing (six or fewer persons);

(l)

Residential care home (six or fewer persons);

(Ord. No. 18-03, 9-26-18; Ord. 82-4 §3 (part)).

17.16.030 - Conditional uses.¶

The following are conditional uses in the R2 zone:

18	(c)	Child day care services;
20	(a)	Private educational or religious institutions;
22	(b)	Outdoor sports or recreational facilities;
36	(b)	Public service facilities;
42	(a)	General agriculture;
46		Interment services;
2	(i)	Single-room occupancy units;
2	(m)	Residential care home (seven or more persons).

(Ord. No. 18-03, 9-26-18; Ord. 82-4 §3 (part)).

17.16.040 - Lot regulations.¶

The following regulations apply to lots in the R2 zone:

The	following regulations apply to lots in the R2 zone:
A.	Minimum lot area	6,000 square feet, but not less than 3,000 square feet per dwelling unit;
B.	Minimum lot width	60 feet;
C.	Maximum ground coverage	50 percent;
D.	Minimum yards:
	1. Front	20 feet;
	2. Rear	20 feet;
	3. Side	6 feet;
E.	Special yards for dwelling	The distance between separate buildings of a dwelling group shall be not less than 12 feet;

F. Maximum building height

35 feet.

(Ord. 82-4 §3 (part)).

Chapter 17.18 - MULTIPLE-RESIDENCE (R3) ZONE

Sections: