Skip to content

Title 17Chapter 17.36 — DESIGN STANDARDS GENERALLY

§ 17.60

Union City Planning Code · 2026-07 edition · updated 2026-07-25 · Union City

§ 17.60.010. Street name signs.

Street name signs shall be installed by the subdivider at all intersections of named streets and paths, and shall be conspicuous to pedestrian and vehicular traffic in all directions. The installation at the intersection of two such ways shall consist of at least one four-way street name sign and post, provided, that where the pavement width of one or both of the streets exceeds forty feet, two such signs shall be installed at such intersection; provided that at least one such street sign shall be installed wherever there shall occur an angular change of direction of a street centerline of sixty degrees or more. In all cases, installation shall be of a type specified and shall be installed in accordance with the specifications.

No sign shall be made up of more than three pairs of name plates. If more than two streets intersect, sufficient signs shall be installed clearly to identify all such streets. (Ord. 143-76 § 2, 1976)

§ 17.60.020. Warning signs.

Determination of necessary warning signs at dead-end streets, not including cul-de-sacs, shall be made by the City Engineer, and such signs shall conform to the current sign chart of the Division of Highways of the State of California, and such warning and regulatory signs shall be installed at the expense of the subdivider.

(Ord. 143-76 § 2, 1976)

Downloaded from https://ecode360.com/UN5025 on 2026-07-06

Union City, CA

SUBDIVISIONS

§ 17.64.010

§ 17.64.030

CHAPTER 17.64 STREET LIGHTING

Get a plain-English answer with a citation back to this text.

Ask AI about this code
Contents — Union City Planning Code

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.