Skip to content

Title 18 — ZONING ORDINANCE›Chapter 18.04 — PURPOSE

Chapter 18.41 — I-2 ZONE—HEAVY INDUSTRIAL

Sutter Creek Zoning Code · 2026-06 edition · updated 2026-09-25 · Sutter Creek

18.41.010 - Regulations designated.

The following regulations apply in the I-2 heavy manufacturing zone unless otherwise provided in this title.

18.41.015 - Purpose.

The I-2 district is designed to accommodate intensive industrial and manufacturing uses, including such uses that require outdoor operations or need to be protected from land use conflicts.

18.41.020 - Permitted uses.

Uses permitted in the I-2 zone shall be:

A.

Any of the following uses:

1.

Canning and processing plants;

2.

Aircraft and automobile factories;

3.

Iron, steel, brass or copper foundries or fabrication plants and heavyweight casting;

4.

Planing mills, lumber mills and similar processes;

5.

Power plants, including co-generation plants;

6.

Tire recapping and retreading plants;

7.

Truck and trailer repairing and overhauling shops;

8.

Manufacture of prefabricated buildings;

9.

Manufacture of batteries.;

Construction material sales yards including the manufacture of material such as concrete and asphalt and the storage of aggregate; and

11.

Warehousing and storage, including construction material and equipment storage, public utilities materials and equipment storage, and public storage of vehicles, RVs, boats, and trailers.

B.

Accessory buildings necessary to such use located on the same lot or parcel of land may be permitted.

C.

Any use conducted within the I-2 zone shall comply with the provisions of chapter 18.50, site plans.

(Ord. 373, §21(a, b), 2023)

18.41.030 - Buildings—Height limitations.

Maximum building height in the I-2 zone shall be limited to four stories and shall not exceed fifty feet.

18.41.040 - Yard—Front.

All buildings shall be located at least twenty-five feet from the front lot line.

18.41.050 - Yard—Side.

Side yard in the I-2 zone shall be ten feet.

18.41.060 - Yard—Rear.

Rear yard in the I-2 zone shall be ten feet.

18.41.070 - Area requirements.

Area requirements for the I-2 zone shall be a minimum lot size of forty thousand square feet.

18.41.080 - Buildings—Required distance between.

Required distance between buildings on the same lot for the I-2 zone shall be ten feet

18.41.090 - Lot coverage.

Building lot coverage shall not exceed ninety percent of the lot area.

Chapter 18.42 - PD COMBINING ZONE—PLANNED DEVELOPMENT COMBINING

18.42.010 - Regulations designated.

The following regulations apply in the PD (planned development) combining zone unless otherwise provided in this title.

Get a plain-English answer with a citation back to this text.

Ask AI about this code
▸Contents — Sutter Creek Zoning Code
Sutter Creek Zoning Code
  1. Title 18 — ZONING ORDINANCE
  2. ▸Title 18 — ZONING ORDINANCE
    Overview
    1. ▸Chapter 18.04 — PURPOSE
      Overview
      1. Chapter 18.06 — PROCEDURES
      2. Chapter 18.10 — General Provisions
      3. Chapter 18.12 — ZONES
      4. Chapter 18.13 — RR ZONE—RESIDENTIAL RANCHETTE ZONING DISTRICT
      5. Chapter 18.14 — RE ZONE—RESIDENTIAL ESTATE
      6. Chapter 18.15 — RL ZONE—RESIDENTIAL LOW DENSITY
      7. Chapter 18.16 — R-1 ZONE—ONE FAMILY DWELLING
      8. Chapter 18.20 — R-2 ZONE—TWO FAMILY DWELLING
      9. Chapter 18.28 — R-3 ZONE—MULTIPLE FAMILY DWELLINGS
      10. Chapter 18.29 — PS ZONE—PUBLIC SERVICE
      11. Chapter 18.30 — MH COMBINING ZONE—MANUFACTURED HOUSING COMBINING
      12. Chapter 18.32 — C-1 ZONE—LIMITED COMMERCIAL
      13. Chapter 18.36 — C-2 ZONE—COMMERCIAL
      14. Chapter 18.38 — DTC ZONE—DOWNTOWN COMMERCIAL
      15. Chapter 18.39 — MU ZONE—MIXED USE
      16. Chapter 18.40 — I-1 ZONE—LIGHT INDUSTRIAL
      17. Chapter 18.41 — I-2 ZONE—HEAVY INDUSTRIAL
      18. Chapter 18.42 — PD COMBINING ZONE—PLANNED DEVELOPMENT COMBINING
      19. Chapter 18.43 — OS ZONE—OPEN SPACE
      20. Chapter 18.44 — R ZONE—RECREATION
      21. Chapter 18.45 — DESIGN STANDARDS
      22. Chapter 18.46 — NONCONFORMING BUILDINGS AND USES
      23. Chapter 18.47 — SPECIAL EVENTS
      24. Chapter 18.48 — OFF-STREET PARKING
      25. Chapter 18.49 — TELECOMMUNICATION AND ELECTRICAL GENERATING TO…
      26. Chapter 18.50 — SITE PLANS
      27. Chapter 18.52 — VARIANCES
      28. Chapter 18.54 — ZONE CHANGES
      29. Chapter 18.56 — ZONING UPON ANNEXATION
      30. Chapter 18.58 — ACCOMMODATIONS OF PERSONS WITH DISABILITIES
      31. Chapter 18.60 — CONDITIONAL USE PERMITS
      32. § 18.060
      33. Chapter 18.61 — ACCESSORY DWELLING UNITS
      34. Chapter 18.62 — DENSITY BONUSES
      35. Chapter 18.66 — SURFACE MINING AND RECLAMATION
      36. Chapter 18.68 — ENFORCEMENT

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.