Chapter 18.28 — CIVIC, PARK, AND OTHER ZONES

The agricultural production and sales (APS) zoning district is intended to preserve agricultural lands in the city, while permitting compatible uses such as, the processing and packaging of agricultural products, recreation, the sales and marketing of agricultural products, and commercial uses, such as restaurants and bed and breakfast establishments. The APS zone is consistent with the agriculture and open space land use designation in the general plan.

==> picture [336 x 174] intentionally omitted <==

• (Ord. No. 743, § 3, 3-21-2017)

The park (P) zoning district is the primary park and recreation zone in the city allowing for a variety of permitted active and passive outdoor recreational uses. The zone also allows for compatible public facilities that may benefit from proximity to a park such as, community centers and libraries. The P zone is consistent with the park land use designation in the general plan.

==> picture [312 x 236] intentionally omitted <==

(Ord. No. 743, § 3, 3-21-2017)

The open space (OS) zoning district is intended for the preservation and restoration of open space areas for which the primary use is the retention of these lands in their natural state. Secondary or complementary uses may include trails, accessory buildings (such as maintenance structures), and passive power generation, where these do not impinge on the functionality of the open space areas to be preserved. The OS zone is consistent with the agriculture and open space land use designation in the general plan.

==> picture [271 x 204] intentionally omitted <==

• (Ord. No. 743, § 3, 3-21-2017)

The public/quasi-public (PQP) zoning district is intended to accommodate governmental, educational, community service (such as fire or law enforcement), religious, child care, or cultural facilities (galleries, art, and dance schools) that are complementary to community life. The PQP zone is consistent with the civic land use designation in the general plan.

==> picture [270 x 205] intentionally omitted <==

• (Ord. No. 743, § 3, 3-21-2017)

The planned unit development (PUD) permit is designed and intended to provide for the orderly development of land in conformance with the general plan and applicable specific plan. The permit would allow a flexible design approach to the establishment of a community environment equal to or better than that resulting from the application of the minimum standards of this title. The permit is designed and intended to accommodate various types of development such as neighborhood and district shopping centers, professional and administrative office areas, multi-family housing developments, single-family

residential developments, commercial service centers, or light industrial parks, or any other use or combination of uses, which can be made appropriately a part of a planned development. The underlying zoning districts and general plan land use designations will vary.

(Ord. No. 743, § 3, 3-21-2017)

Table 18.28.01, "Densities and Intensities in Civic/Park/Other Zones" shows the minimum and maximum build-out possible in each residential zone.

Table 18.28.01 Densities and Intensities in Civic/Park/Other Zones

Note: Notwithstanding any other provision of this chapter (or code), all development shall be consistent with the adopted current version of the Travis Air Force Base Land Use Compatibility Plan, which as of writing of this document is the one adopted on October 8, 2015 (Resolution 15-17).

(Ord. No. 743, § 3, 3-21-2017)

(Ord. No. 743, § 3, 3-21-2017; Ord. No. 809, § 1, 8-20-2024)

Chapter 18.30 - SPECIAL USE STANDARDS

Footnotes:

--- ( 2 ) ---

Editor's note— Ord. No. 809, § 1, adopted Aug. 20, 2024, amended the title of Ch. 18.30 to read as herein set out. The former Ch. 18.30 title pertained to specific use standards.