Skip to content

Earlier editions: 2026-07

Title 8 — Building Regulations›Chapter 2 — BUILDING CODE

San Juan Capistrano Municipal Code § 10.1 Building Code

San Juan Capistrano Municipal Code · 2026-10 edition · updated 2026-10-04 · San Juan Capistrano

Cite as: San Juan Capistrano Municipal Code § 10.1 · Text as of 2026-10-04

10.1.5 All ferrous pipe and joints shall be polyethylene encased per AWWA C150, Method A, B, or C.

All fittings shall be protected with a loose 8-mil polyethylene tube or sheet. The ends of the tube or sheet shall extend past the joint by a minimum of 12 inches and be sealed with 2-inch-wide tape approved for underground use. Galvanizing does not meet the requirements of this section.

Exception: 304 or 316 stainless steel pipe and fittings.

(iv) Section 10.4.1.1, "Coatings," is hereby revised to read as follows:

Get a plain-English answer with a citation back to this text.

Ask AI about this code
▸Contents — San Juan Capistrano Municipal Code

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.