San Francisco Planning Code § 932 Method of Measurement
San Francisco Planning Code · 2026-08 edition · updated 2026-09-23 · San Francisco
Cite as: San Francisco Planning Code § 932 · Text as of 2026-09-23
The following rules shall apply in the measuring of height:
The point above which such measurements shall be taken shall be as specified in the definition of "height" in § 102.12.
The upper point to which such measurement shall be taken shall be the highest point on the finished roof in the case of a flat roof, and the average height of the rise in the case of a pitched or stepped roof, or similarly sculptured roof form or any higher point of a feature not exempted by Section 933.
In cases where the height limit is 65 feet or less and a street from which height measurements are made slopes laterally along the lot, or the ground slopes laterally on a lot that also slopes upward from the street, there shall be a maximum width for the portion of the building or structure that may be measured from a single point at curb or ground level, according to the definition of "height" in § 102.12, as specified in the following table: TABLE 932
HEIGHT MEASUREMENT
ON LATERAL SLOPES
| Average Slope of Curb or Ground From Which Height is Measured | Maximum Width for Portion of Building that May Be Measured from a Single Point |
|---|---|
| 5 percent or less | No requirement |
| More than 5percent but no more than 15percent | 65 feet |
More than 15 percent
55 feet
(Added by Ord. 63-91, App. 2/27/91)
Get a plain-English answer with a citation back to this text.
Ask AI about this code