SEC. 202.1. ZONING CONTROL TABLES.

(a) All Districts that are provided for in Section 201 of this Code have a corresponding Zoning Control Table that details basic development standards and use controls. Zoning Control Tables for R, C, PDR, and M Districts are located in Article 2; Zoning Control tables for Neighborhood Commercial Districts are located in Article 7; Zoning Control tables for Chinatown and Mixed Use Districts are located in Article 8; and Zoning Control tables for Mission Bay Districts are located in Article 9. Zoning Control Tables are intended to be used in conjunction with other relevant sections of the Code. Descriptions for Zoning Control Tables in Articles 7, 8, and 9 are located in the corresponding Article. Each of the Zoning Control Tables contains a brief summary of, and reference guide to, the specific rules that appear elsewhere in this Planning Code. To the extent of any inconsistency between a Table and the relevant governing sections, the latter shall control.

(b) Zoning Control Tables in Article 2 are organized as follows:

(1) Building Standards: This section lists basic Code requirements that are specific to that particular Zoning District and apply to all buildings in that District regardless of the proposed use.

(2) Residential Standards and Uses: This section lists basic Code requirements for Residential uses, permitted residential uses, and permitted densities for the subject District.

(3) Non-Residential Standards and Uses: This section lists basic Code requirements for Non-Residential Uses and Non-residential use controls.

(c) The columns in the Zoning Control Tables in Article 2 are organized as follows:

(1) The first column in the Zoning Control Table, titled "Zoning Category," provides either the title of the listed requirement or the Use.

(2) The second column, titled "§ References," contains numbers of other sections in the Planning Code, and other City Codes, in which additional control provisions, including exceptions and definitions where pertinent, are contained. Any requirements in these sections pertinent to the zoning district shall be followed.

(3) In the third and subsequent columns, the controls applicable to the various Districts are indicated either directly, by reference to other Code Sections that contain the controls, or by indicating when a specific requirement is required.

(d) The uses and features listed in the Zoning Control Tables in Articles 2, 7, 8, and 9 are permitted in the Districts as indicated by the following symbols in the respective columns for each district:

(1) Determinations as to the classification of uses not specifically listed shall be made in the manner indicated in Sections 202 and 307(a) of this Code.

(2) References shall be made to Sections 204 through 204.5 for regulations pertaining to accessory uses permitted for principal and conditional uses listed in Sections 206.1 through 206.4.

(3) Reference shall also be made to the other Articles of this Code containing provisions relating to definitions, offstreet parking and loading dimensions, areas and open spaces, nonconforming uses, height and bulk districts, signs, historic preservation, and other factors affecting the development and alteration of properties in these use Districts.

(4) Reference shall be made to Section 249.1 for provisions pertaining to uses in the Folsom and Main Residential/Commercial Special Use District.

(Added by Ord. 22-15, File No. 141253, App. 2/20/2015, Eff. 3/22/2015; amended by Ord. 129-17, File No. 170203, App. 6/30/2017, Eff. 7/30/2017)

AMENDMENT HISTORY

Division (d) amended; Ord. 129-17, Eff. 7/30/2017.