Skip to content

Article IX — INDUSTRIAL DISTRICTS

§ 25.93 INDUSTRIAL LOT STANDARDS.

Red Bluff Zoning Code · 2026-07 edition · updated 2026-07-25 · Red Bluff

The following is a list of industrial lot standards.

The following is a list of industrial lot standards.
Item M—1 M—2 P-I
Item M—1 M—2 P-I
Setbacks (Minimum in feet):
Front yard 5 5 30
Side yard None(6) None(6) 10(4)
Street side yard 5 5 10(4)
Rear yard 5 5 10(4)
Lot area (Minimum in square feet):
Normal lot 6,000 6,000 6,000
Corner lot 7,000 7,000 7,000
Lot dimensions (Minimum in feet):
Normal lot width 60 60 60
Corner lot width 70 70 70
Lot depth 100 100 100
Cul-de-sac frontage 40 40 40
Miscellaneous:
Parking (Minimum) (1) (1) (1)
Building coverage (Maximum) 65% 70% 60%
Surfaced area (Maximum) 85% 90% 85%
Landscaped area (Minimum) (3) (3) (3)
Density (Maximum in acres) (2) (2) (2)
Height (Maximum in feet) 50(5) 60(5) 50(5)
NOTES TO TABLE:
1. See parking and loading requirements and standards for commercial or industrial uses at § 25.217.
2. Residential use requires use permit per § 25.92 or PD use permit per § 25.137.
3. At a minimum, front and street side yards shall be landscaped. Parking areas shall include landscaping and shading per § 25.221.
4. Except setback adjacent to a runway or taxiway is 30 feet minimum.
5. See also § 25.187 for height exceptions.
6. Except as required by the applicable Uniform Building Code.

(`61 Code, § 25.09.40) (Ord. 915, passed 6-20-2000; Am. Ord. 930, passed 7-3-2001)

Get a plain-English answer with a citation back to this text.

Ask AI about this code
▸ Contents — Red Bluff Zoning Code
Red Bluff Zoning Code
  1. Article I — ADOPTION OF PLAN
  2. Article II — DESIGNATION OF DISTRICTS
  3. Article III — ESTABLISHMENT OF DISTRICTS
  4. Article IV — AMENDMENT PROCESS
  5. Article V — PROCEDURES FOR NAMING AND RENAMING STREETS,
  6. Article VI — RESIDENTIAL DISTRICTS
  7. Article VII — RESERVED
  8. Article VIII — COMMERCIAL DISTRICTS
  9. ▸ Article IX — INDUSTRIAL DISTRICTS
    Overview
    1. § 25.82 GENERALLY.
    2. § 25.83 M—1, LIGHT INDUSTRIAL DISTRICTS.
    3. § 25.84 M—2, GENERAL INDUSTRIAL DISTRICTS.
    4. § 25.85 P-I, PLANNED INDUSTRIAL DISTRICTS.
    5. § 25.86 LOT STANDARDS.
    6. § 25.87 PARKING.
    7. § 25.88 SETBACK AND HEIGHT REQUIREMENTS.
    8. § 25.89 LANDSCAPE STANDARDS.
    9. § 25.90 SIGNAGE.
    10. § 25.91 COMPLIANCE WITH DESIGN REVIEW GUIDELINES.
    11. § 25.92 INDUSTRIAL ZONES AND PERMIT REQUIREMENTS.
    12. § 25.93 INDUSTRIAL LOT STANDARDS.
  10. Article X — PUBLIC DISTRICTS
  11. Article XI — COMBINING DISTRICTS
  12. Article XII — USE PERMITS
  13. Article XIII — ADMINISTRATIVE USE PERMITS
  14. Article XIV — PLANNED DEVELOPMENT USE PERMITS
  15. Article XV — VARIANCES
  16. Article XVI — SETBACK ADJUSTMENTS
  17. Article XVII — NONCONFORMING USES
  18. Article XVIII — RESERVED
  19. Article XIX — GENERAL PROVISIONS
  20. Article XX — CERTIFICATES OF OCCUPANCY
  21. Article XXI — RECREATIONAL VEHICLES AND COMMERCIAL COACHES
  22. Article XXII — PROHIBITED USES
  23. Article XXIII — OFF-STREET PARKING AND LOADING
  24. Article XXIV — ENFORCEMENT AND PENALTIES
  25. Article XXV — DEFINITIONS
  26. Article XXVI — ADULT-ORIENTED BUSINESSES
  27. Article XXVII — DEVELOPMENT AGREEMENT PROCEDURES

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.