Title 23 — Zoning

Chapter 23.112 — OLD TOWN PLACENTIA REVITALIZATION PLAN DEVELOPMENT STANDARDS

Placentia Zoning Code · 2026-06 edition · ingested 2026-07-06 · Placentia

§ 23.112.010. Purpose and intent.

The following provides detailed regulations for development of land uses within Old Town Placentia (Old Town). The purpose of these standards is to facilitate the enhancement of the city’s historic core, characterized by its small-scaled village atmosphere, shopfront architecture, mix of uses and inviting streetscapes. Specifically, these regulations are aimed at accomplishing the following objectives, complementing the objectives of the TOD Packing House District to the south:

  • (a) Meet the goals, objectives and follow the recommendations for Old Town as detailed in the Old Town Revitalization Plan;

  • (b) Preserve and enhance the distinguishable “village” look and feel of Old Town Placentia;

  • (c) Preserve the original Old Town grid pattern comprised of short, walkable blocks;

  • (d) Preserve the diverse mix of land use types while attracting a more diversified commercial base that creates a shopping destination and contributes to a more pedestrian-friendly environment;

  • (e) Encourage infill development that contributes to creating a compact walkable environment important to a vital town center;

  • (f) Support businesses and attract new investment through enhanced safety and security measures, development incentives, a high level of amenities and adaptive reuse standards;

  • (g) Create fine-grained detail in architectural and urban form that provides interest and complexity at the level of the pedestrian and bicyclist;

  • (h) Enhance public safety by improving street lighting, public services, streetscapes and alleys, and police surveillance;

  • (i) Support multimodal transportation that improves ease of access to a variety of transportation methods such as walking, cycling and public transit;

  • (j) Create a sustainable environment through standards that result in “green” buildings and infrastructure, as well as a safe, healthy and attractive environment;

  • (k) Preserve and highlight historic features that make Old Town Placentia a unique destination; (l) Provide for public gathering spaces and small passive recreation places;

  • (m) Improve connections between Old Town and the region through increased transit ridership and the provision of hubs for various transportation;

  • (n) Maintain an adequate level of parking and access for automobiles;

  • (o) Continue to brand Old Town Placentia through wayfinding, welcome signs, banners, public art, creative public spaces, a focal point (i.e., gazebo), etc.;

  • (p) Create a physical and visual connection with the TOD Packing House District to the south through interconnected plazas on both sides of the rail line; and

  • (q) Ensure high quality architecture (three hundred sixty (360) degree design) that embraces the character of Old Town and its architecture and urban design.

  • (Ord. O-2017-05 § 4, 2017)

§ 23.112.020. Applicability and general provisions.

Old Town Placentia shall apply to lands delineated as such on the city’s official zoning map and shown in Section 23.112.030 Figure 1. All land uses and development within Old Town shall be located and developed in accordance with the following provisions. The standards of Old Town shall not apply to development for which approvals were granted prior to the adoption of these regulations and which entitlements are still valid and for development which has current, valid building permits. (Ord. O-2017-05 § 4, 2017)

§ 23.112.030. Planning subareas and overlay zone.

Old Town Placentia is divided into five (5) subareas and one (1) overlay zone described below:

  • (a) Main Street (MS) (this subarea has two-, three- and four-story areas).

  • (b) Village (V).

  • (c) Mixed-Use (MU).

  • (d) High-Density Residential (HDR).

  • (e) Public Facilities (PF).

  • (f) R-2 Overlay Zone.

==> picture [442 x 294] intentionally omitted <==

Figure 1. Old Town Zoning Map

(Ord. O-2017-05 § 4, 2017)

§ 23.112.040. Land use and permit requirements.

This section identifies the land use types allowed by the city in Old Town Placentia.

  • (a) Allowable Land Uses. A parcel or building within Old Town shall be occupied by only the land uses allowed by Table 1. Each land use in the table is defined in the glossary of the ordinance codified in this chapter or in the Placentia Municipal Code (PMC) (Definitions, Chapter 23.04 ).

    • (1) Multiple Uses. Any one or more land use identified by Table 1 as being allowable within Old Town may be established on any parcel, subject to the planning permit requirement listed in the table, and in compliance with all applicable requirements of this code.

    • (2) Unlisted Uses. The development services director may determine an unlisted use is similar to another allowable permitted or conditionally permitted use and if all of the following findings can be made:

      • (A) The use is no greater in density or intensity than other uses allowed, or conditionally allowed in the planning subarea;

      • (B) The use is compatible with permitted or conditionally permitted uses in the planning subarea;

      • (C) The use will meet the purpose of the planning subarea;

      • (D) The use is consistent with the goals and policies of the general plan; and

      • (E) The use will not be detrimental to the public health, safety or welfare.

Applicants may appeal this decision using the use conformity determination process, outlined in Section 23.39.035 of the PMC.

  • (3) Residential Uses. In the R-2 overlay area as shown on the Old Town Zoning District planning subarea map, existing and residential are permitted pursuant to Chapter 23.15 of the zoning code.

  • (b) Permit Requirements. Table 1 provides for land uses that are:

    • (1) Permitted. These uses are permitted subject to compliance with all applicable provisions of this chapter and may require a development plan review or site plan review in compliance with Chapter 23.75 of the PMC. These uses are shown as “P” uses in Table 1. All new construction projects as defined in this chapter and in this zone must be reviewed by the planning and development ad hoc committee.

    • (2) Conditionally Permitted Uses. These uses are allowed subject to the approval of a use permit and require a public hearing before the planning commission in compliance with Chapter 23.87 of the PMC. These uses are shown as a “UP” in Table 1. All proposed projects in this zone must be reviewed by the planning and development ad hoc committee.

    • (3) Not Permitted. These uses are not permitted, and shown as “NP” in Table 1. A land use that is not listed in Table 1 is not allowed within the district, except as otherwise provided in Section 23.112.030(a )(3). Uses that are expressly listed as not permitted are prohibited.

  • (c) Standards for Specific Land Uses. Where the last column in Table 1 (Specific Use Regulations) includes a section number, the regulations in the referenced section of this chapter and/or the PMC apply to the use. Provisions in other sections of this chapter may also apply.

(click here to view the full table)

Table 1. Allowed Land Uses and Permit Requirements

P – permitted

UP – use permit

NP – not permitted

Table 1. Allowed Land Uses and Permit Requirements Table 1. Allowed Land Uses and Permit Requirements Table 1. Allowed Land Uses and Permit Requirements Table 1. Allowed Land Uses and Permit Requirements
P – permitted
UP – use permit
NP – not permitted
Permit Requirement Planning Subareas Notes And
Special Use
Main
Street
Village Mixed-
Use (1)
High-
Density
Residential
Public
**Facility **
Regulations
Recreation, Education, Public Assembly Uses
1. Commercial Recreation
Facility, Indoor
NP NP NP NP NP
2. Community Recreation
Facility
NP NP NP NP NP
3. Conference/ Convention
Facility
NP NP NP NP NP
4. Health/Fitness Facility,
including stand alone or
roving ftness classes
NP UP UP NP NP
5. Library, Museum NP UP NP NP NP
6. Public Park, Playground
or Plaza
P P P P P
7. School – specialized
education, training
NP NP NP NP NP
8. Studio – art, dance,
martial arts, music,
photography, cooking,
instructional, ftness (such
as yoga, Pilates, spin, etc.)
UP UP UP NP NP Not to exceed
1,500 square
feet
9. Theatre (live performing
arts, live music)
UP UP UP NP NP Movie cinemas
only permitted in
mixed use.
Residential Uses
1. Emergency/Transitional
Shelter
NP NP NP NP NP
2. Home Occupation NP P P P NP Not permitted in
ground foor
units, must
comply with
home
occupation
provisions of
PMC.
3. Live Work NP UP NP NP NP
4. Multifamily Residential,
new construction only,
maximum of 29 du/ac
UP (only
permitted
above
the
UP
(upper
foors
only)
UP
(upper
foors
only)
NP NP See defnition of
“new
construction.”
Permit Requirement Planning Subareas Planning Subareas Planning Subareas Notes And
Special Use
--- --- --- --- --- --- ---
Main
Street
Village Mixed-
Use (1)
High-
Density
Residential
Public
**Facility **
Regulations
second
foor)
5. Multifamily Residential,
new construction only,
minimum of 30 du/ac
NP UP
(upper
foors
only)
UP
(upper
foors
only)
P (by right) NP By right
developments
must meet:
• The purpose
and intent of this
chapter as well
as all standards.
• All zoning code
regulations.
• All city policies.
• Requires
review by the
planning &
development ad
hoc committee.
• All existing and
future design
guidelines.
6. Assisted Living Facility NP NP NP NP NP
7. Single-Family or Duplex
Residential, new
NP NP NP NP NP Only permitted
in the R-2
overlay zone.
Pursuant to Ch.
23.15of the
municipal code.
8. Existing Residential Uses
Fronting on Main and Alta
Streets
P P NP NP NP Only permitted
in the R-2
overlay zone.
Pursuant to Ch.
23.15of the
municipal code.
9. Mixed Use Development UP (only
permitted
above
the
second
foor)
UP UP NP NP
Retail/Commercial Uses (2)
1. New Ground Floor
Residential and Offce Uses
in R-2 Overlay Zone
UP UP NA NA NA 50% of the lot
depth,
measured from
Alta or Main,
must be either
residential or
offce along Alta
and Main. The
Permit Requirement Planning Subareas Planning Subareas Planning Subareas Notes And
Special Use
--- --- --- --- --- --- ---
Main
Street
Village Mixed-
Use (1)
High-
Density
Residential
Public
**Facility **
Regulations
rear 50%, facing
the alley, may
be any other
use permitted in
the subarea.
2. Accessory Retail or
Services
P P P NP NP Only permitted
when primary
commercial use
is established.
Must be
incorporated
into mixed-use;
cannot stand
alone.
3. Adult Entertainment
Facility or Business
NP NP NP NP NP Pursuant to
PMC Ch.23.89
4. Liquor Stores/Alcoholic
Beverage Sales (not
associated with bar,
brewery, distillery,
restaurant, or neighborhood
market or grocery)
NP NP NP NP NP
5. Antique or Collectible
Store
P P P NP NP
6. Artisan/Handcraft Shop P P P NP NP
7. Auto Repair, Auto Sales or
Auto Parts Sales
NP NP NP NP NP
8. Bar, Tavern, Brewery,
Distillery, Tasting Rooms,
Wine Cellar
UP UP UP NP NP
9. Drive-Through (any uses) NP NP NP NP NP
10. General Retail – less
than 5,000 sf
P P P NP NP
11. General Retail –5,000 sf
to 20,000 sf
UP UP UP NP NP
12. General Retail – more
than 20,000 sf (max 60,000
sf)
NP NP NP NP NP
13. Groceries, Specialty
Foods – 10,000 sf or less
P P P NP NP With alcohol
sales, a use
permit is
required.
14. Groceries, Specialty
Foods – more than 10,000 sf
UP UP UP NP NP
Permit Requirement Planning Subareas Planning Subareas Planning Subareas Notes And
Special Use
--- --- --- --- --- --- ---
Main
Street
Village Mixed-
Use (1)
High-
Density
Residential
Public
**Facility **
Regulations
15. Medical Marijuana
Facilities
NP NP NP NP NP Pursuant to
PMC Ch.23.46
16. Neighborhood Market
(without alcohol beverage
sales) – 10,000 sf or less
P P P NP NP With alcohol
sales, a use
permit is
required.
17. Nightclub UP UP UP NP NP
18. Outdoor Dining P P P NP NP Permitted in
public right-of-
way with an
encroachment
permit. Pursuant
to ABC
requirements as
well as the city’s
outdoor dining
permit and
guidelines.
19. Outdoor Display and
Sales
NP NP NP NP NP May not
encroach into
public right-of-
way.
20. Pet Store, Pet Boarding,
Animal Shelter
UP UP UP NP NP Sheltering and
boarding shall
require a use
permit.
21. Restaurant P P P NP NP
Table 1. Allowed Land Uses and Permit Requirements Table 1. Allowed Land Uses and Permit Requirements Table 1. Allowed Land Uses and Permit Requirements Table 1. Allowed Land Uses and Permit Requirements
22. Restaurant with Alcohol
Sales
UP UP UP NP NP
23. Secondhand/Thrift/
Consignment/Pawn/Charity
Store
UP UP UP NP NP
24. Service Station NP NP NP NP NP
25. Tobacco Sales, including
Electronic Smoking Devices
UP UP UP NP NP
Services – Business, Financial, Medical, Professional
1. ATM P P P NP NP Must be
integrated into
building façade.
Stand alone
kiosks not
permitted.
2. Bank (2,000 sf or less) P P P NP NP Banks over
2,000 sf are not
permitted.
Permit Requirement Planning Subareas Planning Subareas Planning Subareas Notes And
Special Use
--- --- --- --- --- --- ---
Main
Street
Village Mixed-
Use (1)
High-
Density
Residential
Public
**Facility **
Regulations
3. Business Support
Services (copying, printing,
offce supplies, etc.)
P P P NP NP
4. Hospital NP NP NP NP NP
5. Medical Offce P P P NP NP See defnition.
Only permitted
on upper foors,
except in R-2
overlay.
6. Offce P P P NP P See defnition.
Only permitted
on upper foors
except in R-2
overlay.
Services – General
1. Adult Daycare NP NP NP NP NP
2. Cigar or Hookah Lounge UP UP UP NP NP
3. Commercial Daycare
Center
UP UP UP NP NP
4. Hostess Bars NP NP NP NP NP
5. Laundromat and Laundry
Services
UP UP UP NP NP
6. Lodging – B&B UP UP NP NP NP
7. Lodging – Hotel UP UP UP NP NP
8. Massage Establishments UP UP UP NP NP Not permitted on
the ground foor
in any subarea.
Pursuant to
PMC
§23.30.030
9. Meeting Halls, Banquet
Centers (Stand alone)
NP NP NP NP NP
10. Personal Services P P P NP NP
11. Public Safety Facility NP NP NP NP P
12. Spa Services (with or
without alcohol)
UP UP UP NP NP
13. Tattoo Parlors/Body
Modifcation
UP UP UP NP NP
Transportation, Communications & Infrastructure
1. Broadcasting or
Recording Studio
UP UP UP NP NP May only be
permitted on
upper foors of
Permit Requirement Planning Subareas Planning Subareas Planning Subareas Notes And
Special Use
--- --- --- --- --- --- ---
Main
Street
Village Mixed-
Use (1)
High-
Density
Residential
Public
**Facility **
Regulations
mixed-use
development.
2. Public Parking Structure
or Surface Parking Lot
UP UP UP UP P
3. Transit Station or Terminal NP NP NP NP NP
4. Telecommunication Cell
Tower/Microcell and Small
Cell Sites
Pursuant to
PMC Ch.23.82
Notes:
(1) See Section 25.112.050, Development standards, for frontage requirements regarding building
located at 102 S. Bradford Ave.
(2) Within the R-2 overlay zone, no retail or commercial uses are permitted on the ground foor.

Notes:

  • (1) See Section 25.112.050, Development standards, for frontage requirements regarding building located at 102 S. Bradford Ave.

  • (2) Within the R-2 overlay zone, no retail or commercial uses are permitted on the ground floor.

  • (Ord. O-2017-05 § 4, 2017)

§ 23.112.050. Development standards.

Table 2 identifies the development standards required for new land uses in new or modified buildings in Old Town Placentia.

(click here to view the full table)

Table 2. Development Standards Table 2. Development Standards Table 2. Development Standards Table 2. Development Standards
Planning Subareas
Development
Standard
Main
Street
Village Mixed-
Use
High-
Density
Residential
Public
Facility
Notes and Additional
Requirements
Residential Density
1. Density (max du/ac) 25 35 55 65 NA Density shall be calculated
using gross lot size, prior
to any required right-of-
way dedications.
**Setbacks.**Minimum setbacks required and, where noted, maximum setbacks established, except where a
frontage type standard allows exceptions or establishes different requirements. Setbacks are measured from
property line after any required dedications. Fire department requirements supersede any setback listed
below.
1. Setback from
Railroad Track
NA NA NA 0 ft. 0 ft. 10′ from rear ROW
preferred by BNSF for
above ground structures.
Applicants should consider
access to rear portion of
new development.
2. Front Yard Setback
(min-max)
0 ft. 0-5 ft. 5-15 ft. 5-15 ft. NA All setback areas facing a
street or alley not devoted
to walkways and driveways
shall be properly
Table 2. Development Standards Table 2. Development Standards Table 2. Development Standards Table 2. Development Standards
--- --- --- --- --- --- ---
Planning Subareas Notes and Additional
Requirements
Development
Standard
Main
Street
Village Mixed-
Use
High-
Density
Residential
Public
Facility
landscaped and
maintained in compliance
with PMC Ch.23.77. In the
R-2 overlay zone, the front
yard setback shall be 15′.
3. Front Yard Setback
for “through lots” and
cross-alley
developments in the R-
2 overlay, fronting Alta
and Main. See
defnitions section.
15 ft. 15 ft. 15 ft. NA NA
4. Side Yard Setback 0 ft. 0 ft. 0 ft. 0 ft. NA
5. Side Yard Setback
for “through lots” and
cross-alley
developments in the R-
2 overlay, fronting Alta
and Main. See
defnitions section.
0-5 ft.* 0-5 ft.* NA 0 ft. NA *Less than 5′ setback
adjoining an R-2 use
requires approval from
adjoining property owner of
said R-2 use.
6. Rear Yard Setback
(min-max)
0-15 ft. 0-15 ft. 0-15 ft. 0 ft. NA
7. Street Side Yard
Setback (minmax)
0 ft. 0-5 ft. 5* ft. 5-15 ft. NA *Refers to Chapman
Avenue setback.
Projections and Encroachments
1. Allowable Setback
Projections
a. Ground Floor:
i. Awnings and canopies over windows: 60″;
ii. Barriers for defning outdoor dining areas such as
fences, railings, planter boxes: as needed to
encompass outdoor dining area;
iii. Sun shade structures: 15′;
iv. Bay windows: 60″ (not wider than 10′);
v. Cornices, belt courses, and similar architectural
features: 12″;
vi. Eaves, roof overhangs: 30″; and
vii. Uncovered porches, decks and landings (may be
covered by arbors or trellises): 10′.
b. Above Ground Floor. Awnings, galleries, balconies,
bay windows: 48″
c. Art, as determined by the approval of the public art
component of the project.
d. For signs, see sign regulations, §23.112.070.
e. All projections must maintain a minimum of 8′
vertical clearance from ground.
2. Public Right-of-Way
Encroachments (all
a. Art, as determined by the approval of the public art
component of the project.
b. For signs, see sign regulations, §23.111.070.
Table 2. Development Standards Table 2. Development Standards Table 2. Development Standards Table 2. Development Standards
--- --- --- --- --- --- ---
Planning Subareas Notes and Additional
Requirements
Development
Standard
Main
Street
Village Mixed-
Use
High-
Density
Residential
Public
Facility
require approval of an
encroachment permit)
c. Outdoor dining is allowed by approval of the director
of development services and director of public works
or their designees and may require Alcoholic Beverage
Control Board (ABC) approval. Approval is pursuant to
the outdoor dining permit and guidelines.
Heights, Rooftop Amenities, Frontages, Lot Sizes
1. Building Height 2-Story
Area: 2
stories,
30′
3-Story
Area: 3
stories,
40′
4-Story
Area: 4
stories,
55′
2 min/3
max
stories,
40′
3 min/4
max
stories,
60′
3 min/4
max
stories, 55′
5
stories,
65′
See “Old Town zoning
map” for height subareas.
New stories built on top of
existing buildings shall be
fully integrated into the
design of the existing
building.
2. Minimum Lot Size
required for a
development at or over
3 stories.
0 8,000
sf*
10,000 sf 10,000 sf 0 *Developments on lots
smaller than 8,000 sf can
be considered if they are
contiguous to parcels with
proposed or approved new
developments and are
developed with a zero lot
line scenario or similar
concept. The development
on the smaller lot must
complement and enhance
the contiguous
development and further
the goals of this chapter.
3. Ground Floor Height
measured from fnished
foor to ceiling (min)
15 ft. 15 ft. 15 ft. NA NA
4. Frontage
Requirements
In order to support the pedestrian environment,
building frontages onto streets and open spaces shall
be maximized. No visible parking is permitted along
frontages. A minimum of 75% of the site frontage shall
be occupied as building frontage. A section of blank
wall shall not exceed 20 linear feet without being
interrupted by a window or entry or other façade
treatment.
Table 2. Development Standards Table 2. Development Standards Table 2. Development Standards Table 2. Development Standards
5. Rooftop Amenities In multifamily residential and mixed-use residential
projects, rooftop amenities, such as and not limited to,
clubhouses, swimming pools, tennis courts, open
space areas, ftness centers, are permitted to project
16′ above the maximum height limit if integrated into
Table 2. Development Standards Table 2. Development Standards Table 2. Development Standards Table 2. Development Standards
--- --- --- --- --- --- ---
Planning Subareas Notes and Additional
Requirements
Development
Standard
Main
Street
Village Mixed-
Use
High-
Density
Residential
Public
Facility
the overall design of the project and the maximum
rooftop building coverage is limited to 30% of the
rooftop foor area. Rooftop amenities shall be set back
from the building edge such that no more than 20% of
the rooftop structure can be visible from the primary
public right-of-way at centerline of the street. Rooftop
amenities are intended for the use of building
residents. Rooftop amenities do not count as a “story”
or “foor.”
6. Height Exceptions Non-habitable building features such as chimneys (up
to 6′ in width), cupolas, fagpoles, monuments,
steeples, roof screens, equipment, and similar
structures, covering no more than 10% of the top foor
roof area to which they are accessory, may exceed
maximum permitted height standards by up to 8′.
7. Building Orientation New commercial or mixed use
construction must orient the
principal façade onto Bradford,
Santa Fe or Chapman Avenue
or Walnut Avenue. In the
mixed use subarea, new
buildings must be oriented
toward Bradford and
Chapman.
NA NA
8. Building Façade for
building located at 102
S. Bradford Avenue (at
Chapman)
The building façade of this building shall be preserved
and integrated into the new design of any new
development proposed on this site. This includes the
façade along Bradford Ave (including the tower and
the front section containing the large round window
opening) and up to and including the façade
(containing
the
stained
glass
windows)
along
Chapman Avenue. The Chapman Avenue façade
preservation can end at the point where the planes of
the two sections of that façade meet (where the
east/west oriented portion of the building meets the
north/south oriented portion of the building). The
preservation does not necessarily have to include the
small vestibule. The proposed architectural design of
any new development shall be reviewed by a
preservation
architect;
the
selection
of
such
preservation expert shall be approved by the city.
Provision of Common Open Space (Residential Only)
1. Amount per
Residential Use
a. 50 sf/unit for residential units;
b. 50 sf/unit for 5 or more live work units.
2. Types of Common
Open Space Permitted
a. Common open space can be active or passive but
must be accessible to all nonresidential tenants (i.e.,
employees and employers) and residential residents.
Table 2. Development Standards Table 2. Development Standards Table 2. Development Standards Table 2. Development Standards
--- --- --- --- --- --- ---
Planning Subareas Notes and Additional
Requirements
Development
Standard
Main
Street
Village Mixed-
Use
High-
Density
Residential
Public
Facility
b. Required setbacks may not be counted as common
open space.
c. Common open space shall be fully landscaped and
requires an approved landscape plan.
d. Examples may include: courtyards, clubhouses with
accompanying landscaped areas, swimming pools,
plazas, greens, parks, playgrounds, picnic areas,
outdoor seating.
3. Rooftop Amenities 1. Rooftop amenities are permitted if they provide
additional recreational or common open space
activities.
2. Amenities, such as and not limited to, clubhouses,
swimming pools, tennis courts, open space areas,
ftness centers, are permitted to project 16′ above the
maximum height limit if integrated into the overall
design of the project and the maximum rooftop
building coverage is limited to 30% of the rooftop foor
area. Roof top amenities shall be set back from the
building edge such that no more than 20% of the
rooftop structure can be visible from the primary public
right-of-way at centerline of the street. Rooftop
amenities are intended for the use of building
residents.
3. 50% of the rooftop amenities (structures and active
recreation amenities) may count towards the square
footage requirement for either private or common open
space.
4. Rooftop buildings supporting recreational activities
may cover a maximum of 30% of the rooftop area and
may project above the maximum height limit by 16′.
4. Courtyard and
Common Open Space
Requirements
1. Courtyards shall be designed as a central courtyard
or as partial, multiple, separated or interconnected
courtyards.
2. Minimum courtyard dimension shall be 40′ when the
long axis of the courtyard is oriented EW and 30′ for a
NS orientation. The courtyard proportion is 1:1
between its width and height for at least 2/3 of the
court’s perimeter. As long as total open space
requirement is met, this ratio could be modifed by up
to 10%.
3. When there are 2 or more courtyards, they shall be
connected to each other.
Provision of Private Open Space (Residential and Live/Work Only)
Table 2. Development Standards Table 2. Development Standards Table 2. Development Standards Table 2. Development Standards
Amount per Residential
Unit
64 sf/unit 6′ min. in any direction; the
total of 64 sf must be
provided as one private
open space area, not
Table 2. Development Standards Table 2. Development Standards Table 2. Development Standards Table 2. Development Standards
--- --- --- --- --- --- ---
Planning Subareas Notes and Additional
Requirements
Development
Standard
Main
Street
Village Mixed-
Use
High-
Density
Residential
Public
Facility
broken up into smaller
sizes.
Shopfronts
The following are specifc guidelines for shopfronts in the Old Town area:
1. 12′ to 16′ tall, as measured from the adjacent sidewalk.
2. The corresponding storefront(s) opening(s) along the primary frontage shall
comprise 65% of the 1st foor wall area facing the street and not have opaque,
stucco or refective glazing.
3. Storefronts may be recessed from the frontage line by up to 10′.
4. “Bulkheads,” which are a segment of wall that transitions between the window
opening(s) and the adjacent grade, are also encouraged. The bulkhead shall be
between 24″ and 36″ tall (aluminum storefront or spandrel panel may not
substitute for a bulkhead).
Architectural Styles
1.Main Street Commercial
Multi-story façades are typically divided into
base, body and top with the ground foor taller
than the shorter upper foor which is fnished
by a signifcant parapet. The ground foor has
recessed entries and any expansive glass is
interrupted
by
structural
columns
with
transoms to allow light to penetrate deep into
the interior. Upper foor windows are smaller
with vertical windows directly relating to the
ground foor openings.
Style of architecture
required in Main Street
subareas
2. Mission Revival
Prominent features of the style include red
clay tile roofs, use of balconies, smooth-
stuccoed exterior walls usually painted white,
arched openings, colorful tile work and
elaborate
landscaping.
The
buildings
frequently have courtyards.
Choices of architecture for
the following:
• Village subarea
• Mixed use subarea
• High density residential
subarea
3. Spanish Colonial
Typical features include a low-pitched roof
with little or no eave overhang, a red-tiled
roof, perhaps a prominent rounded arch over
a door, window or porch, a stucco wall
surface, and usually an asymmetrical façade.
The features elaborate molded ornament
around doors and windows, polychrome tile at
ingresses and wrought iron grilles and
balconies.
This style of architecture
permitted only in high
density residential subarea

(Ord. O-2017-05 § 4, 2017)

§ 23.112.060. Parking standards.

  • (a) Parking Standards. Table 3 identifies the parking requirements for new land uses in new or modified buildings in Old Town Placentia. All subareas shall be subject to the parking requirements listed in Table 3, with the exception of the Main Street subarea as described in subsection (b) . Applicants may also elect to pay an in-lieu fee in exchange for meeting the parking requirement, as described in subsection (c) .

  • (b) In-Lieu Parking Fee. Applicants may also elect to pay an in-lieu fee in exchange for meeting the parking requirements in the Main Street subarea or in the Village subarea. Payment made to the city of Placentia in-lieu of providing some or all of the required off-street parking spaces of a project in Old Town shall be allowed by right.

  • (c) Main Street Subarea Parking Exception. Providing parking in this subarea is optional. However, in the three (3) and four (4) story areas of Main Street subarea, parking shall be required for third and fourth floor uses, according to this section, or by payment of an in-lieu parking fee.

  • (d) Village Subarea Parking Exception. Parking only required for the second and third stories, or by payment of an in-lieu parking fee. Parking for the first (ground) floor of existing and future buildings shall not be required.

  • (e) Un-Listed Uses. On-site parking requirements for unlisted but similar uses shall be based on the parking requirements of similar uses found in this section and shall be at the discretion of the development services director. The development services director may require the preparation of a parking demand study by a qualified, licensed traffic engineer approved by the city to determine the parking requirement for unlisted but similar uses.

  • (f) Parking Reduction. Applicants may apply for a parking reduction before the planning commission for Village, high density residential and mixed use subareas up to a maximum reduction of twenty-five (25) percent through a parking demand study or shared parking analysis. Many different kinds of incentives can be considered such as Zip car program, a shared car plan, or automated stacking system. The list of incentives is varied and the specific option can be considered with the completion of a parking demand study. Parking demand studies shall be reviewed and approved at a noticed public hearing before the planning commission, or by the director if a non-discretionary review.

  • (g) Bicycle Parking—Short-Term.

    • (1) Residential. One (1) resident bicycle parking space for every five (5) residential units, or portion thereof.

    • (2) Nonresidential. One (1) bicycle parking space for every five thousand (5,000) square feet, or portion thereof, of nonresidential floor area.

  • (h) Bicycle Parking—Long-Term.

    • (1) Residential. Two (2) bicycle storage units for every five (5) dwelling units for the first twenty (20) units, and one (1) for every five (5) additional units, or portion thereof;
  • (2) Nonresidential. Any establishment with a parking structure and a minimum of ten thousand (10,000) square feet of nonresidential space shall provide long-term bicycle parking at a minimum ratio of one (1) space per twenty (20) vehicle spaces.

  • (i) Electric Vehicle (EV) Charging Stations. A minimum ten (10) percent of a project’s parking spaces shall provide EV Level 2 charging stations, or five (5) percent of total spaces if installing DC fast charging stations.

  • (j) Surface Parking. Surface parking is permitted as long as it is not visible from a public street and is fully landscaped and screened from public view.

  • (k) Parking Structure. Structured parking is permitted only if integrated into the overall design of the building and “wrapped” with the building, such that the parking area is not visible from any portion of the front, sides, rear or interior courtyards of the project.

  • (l) Podium Parking. Permitted if fully integrated into a development with a “wrapped” parking structure.

  • (m) Underground Parking. Permitted if fully integrated into the design of the development.

Table 3. Parking Standards Table 3. Parking Standards Table 3. Parking Standards
Parking Standards Standards Applicable Land Uses
Nonresidential
Retail – spaces per 1,000 sf 2 min./4 max. Accessory retail, antique, artisan,
bank, business support services,
general retail, grocery, retail complex,
personal services, pet store/boarding.
Eating and Drinking
Establishments – spaces per
1,000 sf
5 min./10 max Bar/tavern, restaurant, brewery, etc.
Outdoor Dining 0 Provided the outdoor dining area
does not exceed the interior dining
area. Any square footage over the
interior dining area shall provide
parking pursuant to the eating and
drinking establishment requirement
above.
Specialty Goods & Foods –
spaces per 1,000 sf
2 min./4 max.
Entertainment & Recreation –
spaces per 1,000 sf
6 min./10 max. Health/ftness, recreation,
playgrounds, studios, theatres cannot
be stand alone.
Commercial Goods – spaces per
1,000 sf
2 min./4 max.
Civic & Cultural, including libraries,
museums – spaces per 1,000 sf
3 min./no max.
Offce Professional – spaces per
1,000 sf
2 min./4 max.
Personal Services 3 min./no max.
Live Work 1 min./1.5 max.
ATM 0
Lodging – Bed & Breakfast 1 per sleeping
room.
No assembly space permitted.
Lodging – Hotel 1 per sleeping
room, plus 1
space for every 75
sf of assembly
area.
Residential
Spaces per studio unit 1 min./1 max.
Spaces per 1 bed unit 1 min./1.5 max.
Table 3. Parking Standards Table 3. Parking Standards Table 3. Parking Standards
--- --- ---
Parking Standards Standards Applicable Land Uses
Spaces per 2 bed unit 1.5 min./2 max.
Spaces per 3 or more bed unit 2 min./2.5 max.
Guest spaces per 10 units 2 min./3 max.
Mixed-Use
Mixed Use Parking shall meet
the requirements
for individual land
uses. Residential
parking shall be
separated from
nonresidential
parking and easily
accessible
through a
controlled
mechanism.
Reduced parking may be permitted
through a parking study.
Other
Transit Station or Terminal As per director of
development
services in
coordination with
transportation
authority.
Telecommunication Facility,
Small/Micro Cell Sites
1 space to service
facility.

(Ord. O-2017-05 § 4, 2017)

§ 23.112.070. Sign regulations purpose and intent.

These sign regulations are intended to appropriately limit the placement, type, size, and number of signs allowed within Old Town Placentia, and to require the proper maintenance of signs.

The purposes of these limitations and requirements are to:

  • (1) Avoid traffic safety hazards to motorists, bicyclists, and pedestrians, caused by visual distractions and obstructions;

  • (2) Promote the aesthetic and environmental values of the community by providing for signs that do not impair the attractiveness of the city as a place to live, work, and shop;

  • (3) Provide for signs as an effective channel of communication, while ensuring that signs are aesthetically proportioned in relation to adjacent structures and the structures to which they are attached;

  • (4) Safeguard and protect the public health, safety, and general welfare; and

  • (5) Promote the pedestrian scale of the district.

    • (a) Applicability.

      • (1) These sign regulations apply to all signs in Old Town Placentia, except that directional/instructional signs and real estate signs shall instead comply with the

requirements of the city’s zoning code (sign regulations).

  • (2) The provisions of this chapter do not regulate the message content of a sign (sign copy), regardless of whether the message content is commercial or noncommercial.

  • (3) Sign installation within the areas subject to this code shall require sign permit approval in compliance with the city’s zoning code (sign regulations), unless exempted from sign permit requirements.

  • (4) Sign variances and historic sign designation. See the zoning code (variances).

  • (5) Definitions of the specialized terms and phrases used in this section are in the zoning code (sign regulations).

  • (b) Prohibited Signs. All sign types and sizes not expressly allowed by this chapter shall be prohibited. Examples of prohibited signs include, but are not limited to, the following: (1) Abandoned signs (includes signs on abandoned or closed businesses);

    • (2) Animated and moving signs, including electronic message display signs, and variable intensity, blinking, or flashing signs, or signs that emit a varying intensity of light or color, except time and temperature displays (which are not considered signs);

    • (3) Exposed cabinet/raceways behind channel letters;

    • (4) Internally illuminated cabinet (can) signs;

    • (5) Off-site signs (e.g., billboards, and signs mounted on vehicles);

    • (6) Obscene signs;

    • (7) Pole signs and other freestanding signs over six feet in height;

    • (8) Roof signs;

    • (9) Signs that simulate in color, size, or design, any traffic control sign or signal, or that make use of words, symbols, or characters in a manner that interferes with, misleads, or confuses pedestrian or vehicular traffic;

    • (10) A sign burned, cut, or otherwise marked on or affixed to a rock, tree, or other natural feature;

    • (11) A sign placed within a public right-of-way, except as provided by Table 3 (Sign Standards by Use);

    • (12) A sign painted directly on a building, unless approved as a creative sign;

  • (13) Permanent signs that advertise continuous sales, special prices, or include phone numbers are prohibited;

    • (14) Temporary signs, including the following:

      • (A) Balloons and other inflatable devices,

      • (B) Flags, except official national, state, or local government, institutional or corporate flags, properly displayed, and

      • (C) Pennants and streamers, except in conjunction with an athletic event, carnival, circus, or fair.

  • (c) General Requirements for All Signs.

  • (1) Sign Area and Height Measurement. The measurement of sign area and height shall occur incompliance with the city’s zoning code (sign regulations).

  • (2) Sign Location Requirements. Each sign shall be located in compliance with the following requirements, and all other applicable provisions of this chapter.

    • (A) On-Premises Signs Required. Each sign shall be located on the same site as the subject of the sign, except as otherwise allowed by this chapter.

    • (B) Setback Requirements. Each sign shall comply with the setback requirements of the applicable subarea, except for an approved projecting sign, and except for an approved freestanding sign, which shall be set back a minimum of five (5) feet from the front and side street property lines.

    • (C) Placement on a Building. No sign shall be placed so as to interfere with the operation of a door or window. Signs should not be located so that they cover prominent architectural features of the building.

    • (D) Signs within a Public Right-of-Way. No sign shall be allowed in the public right-ofway except for the following:

      • (i) A projecting sign in compliance with Table 4 (Sign Standards by Use);

      • (ii) Public signs erected by or on behalf of a governmental agency to convey public information, identify public property, post legal notices, or direct or regulate pedestrian or vehicular traffic;

      • (iii) Bus stop signs installed by a public transit company;

      • (iv) Informational signs of a public utility regarding its lines, pipes, poles, or other facilities; or

      • (v) Emergency warning signs erected by a governmental agency, a public utility company, or a contractor doing authorized within the public right-of-way.

    • (E) Any sign installed or placed within the public right-of-way other than in compliance with this section shall be forfeited to the public and be subject to confiscation.

  • (3) Sign Design. The following design criteria shall be used in reviewing the design of individual signs. Substantial conformance with each of the following design criteria shall be required before a sign permit or building permit can be approved.

    • (A) Color. Colors on signs and structural members should be harmonious with one another and relate to the dominant colors of the buildings on the site. Contrasting colors may be utilized if the overall effect of the sign is still compatible with building colors.

    • (B) Design and Construction.

  • (i) Except where otherwise permitted by elsewhere in this section, each sign shall be constructed of permanent materials and shall be permanently attached to the ground, a building, or another structure by direct attachment to a rigid wall, frame, or structure.

    - (ii) Each permanent sign shall be designed by a professional (e.g., architect, building designer, landscape architect, interior designer, or others whose principal business is the design, manufacture, or sale of signs), or who are capable of producing professional results. 
    
    - (iii) Each permanent sign shall be constructed by persons whose principal business is building construction or a related trade including sign
    

manufacturing and installation, or others capable of producing professional results. The intent is to ensure public safety, achieve signs of careful construction, neat and readable copy, and durability, to reduce maintenance costs and prevent dilapidation.

  • (C) Materials and Structure.

    • (i) Sign materials (including framing and supports) shall be representative of the type and scale of materials used on the site where the sign is located. Sign materials shall match those used on the buildings on the site and any other signs on the site.

    • (ii) No sign shall include reflective material.

    • (iii) Materials for permanent signs shall be durable and capable of withstanding weathering over the life of the sign with reasonable maintenance.

    • (iv) The size of the structural members (e.g., columns, crossbeams, and braces) shall be proportional to the sign panel they are supporting.

    • (v) The use of individual letters incorporated into the building design is encouraged, rather than a sign with background and framing other than the structure wall.

  • (D) Street Address. The review authority may require that a sign include the street address of the site, where it determines that public safety and emergency vehicle response would be more effectively served than if the street address were displayed solely on one (1) or more buildings on the site.

  • (E) Copy Design Guidelines. The city does not regulate the message content (copy) of signs; however, the following are principles of copy design and layout that can enhance the readability and attractiveness of signs. Copy design and layout consistent with these principles is encouraged, but not required.

    • (i) Sign copy should relate only to the name and/or nature of the business or commercial center.

    • (ii) Permanent signs that advertise continuous sales, special prices, or include phone numbers are prohibited.

    • (iii) Information should be conveyed briefly or by logo, symbol, or other graphic manner. The intent should be to increase the readability of the sign and thereby enhance the identity of the business.

    • (iv) The area of letters or symbols should not exceed forty (40) percent of the sign area in commercial uses or sixty (60) percent for residential uses.

    • (v) Freestanding signs should contain the street address of the parcel or the range of addresses for a multi-tenant center.

  • (F) Sign Lighting. Sign lighting shall be designed to minimize light and glare on surrounding rights-of-way and properties.

    • (i) External light sources shall be directed and shielded so that they do not produce glare off the site, on any object other than the sign.

    • (ii) Sign lighting shall not blink, flash, flutter, or change light intensity, brightness, or color.

    • (iii) Colored lights shall not be used at a location or in a manner so as to be confused or construed as traffic control devices.

      - (iv) Neither the direct nor reflected light from primary light sources shall create hazards for pedestrians or operators of motor vehicles. 
      
      - (v) For energy conservation, light sources shall be hard-wired fluorescent or compact fluorescent lamps, or other lighting technology that is of equal or greater energy efficiency. Incandescent lamps are prohibited. 
      
    • (4) Sign Maintenance.

      • (A) Each sign and supporting hardware, including temporary signs and awning signs, shall be maintained in good repair and functioning properly at all times. Any damage to a sign or its illumination, including the failure of illumination shall be repaired within a maximum of fourteen (14) days from the date of damage or failure.

      • (B) A repair to a sign shall be of materials and design of equal or better quality as the original sign.

      • (C) A sign that is not properly maintained and is dilapidated shall be deemed a public nuisance, and may be abated in compliance with the city’s zoning code.

      • (D) When an existing sign is removed or replaced, all brackets, poles, and other supports that are no longer required shall be removed, and any/all damage to the exterior of the building shall be repaired/repainted to the satisfaction of the development services director or designee. When an existing sign is removed, the repairs must match surface type and color of building exactly.

  • (d) Sign Standards by Use. Each sign shall comply with the standards provided by this section and comply with the requirements in the following Table 4, except as permitted by the approval of a creative sign permit described below.

  • (e) Master Sign Program. All mixed use projects shall require a master sign program, which is reviewed and approved by the decision-making body in each case. A “master sign plan” means a coordinated program of signage for new or existing commercial, office or residential which contain more than one business establishment or tenant. The master sign program can permit signs that meet the intent and standards of the Sign Code and ensure that the all signs are integrated thoughtfully into the design of the structures, creating a unified architectural statement. The master sign program provides a means for defining common sign regulations for multi-tenant projects, to encourage maximum incentive and latitude in the design and display of multiple signs, and to achieve, not circumvent, the intent of this chapter.

ign Code and ensure that the all signs are integrated thoughtfully into the design of the structures, creating a unified architectural statement. The master sign program provides a means for defining common sign regulations for multi-tenant projects, to encourage maximum incentive and latitude in the design and display of multiple signs, and to achieve, not circumvent, the intent of this chapter.

  • (1) Application Requirements Revisions to Master Sign Programs. A sign permit application for a master sign program shall include all information and materials required by the department, and the filing fee set by the city’s fee resolution. Revisions to a master sign program may be approved by the director with a standard sign permit if the intent of the original approval is not affected. Revisions that would substantially deviate from the original approval shall require the approval of a new master sign program.

  • (2) Standards. A master sign program shall comply with the following standards:

    • (A) The program shall comply with the purpose of this chapter;

    • (B) The signs shall enhance the overall development, be in harmony with, and relate visually to other signs included in the master sign program, to the structures or developments they identify, and to surrounding development;

    • (C) The program shall accommodate future revisions that may be required because of changes in use or tenants; and

    • (D) The program shall comply with the standards of this chapter, except that flexibility is allowed with regard to sign area, number, location, or height to the extent that the master sign program will enhance the overall development and will more fully accomplish the purposes of this chapter.

  • (f) Creative Sign Permit.

    • (1) Definition Creative Sign Permit. Applicants may apply for a creative sign permit for those signs which are not listed or which exceed the provisions of this chapter. The creative sign permit is intended for signs that meet the intent and standards of the sign code, but may not necessarily meet the standards shown in Table 4. An applicant may request approval of a creative sign permit to authorize on-site signs that employ standards that differ from the other provisions of this chapter but comply with the intent of this chapter.

    • (2) Revisions to a master sign program may be approved by the director with a standard sign permit if the intent of the original approval is not affected. Revisions that would substantially deviate from the original approval shall require the approval of a new master sign program.

    • (3) Purpose. To encourage signs of unique design, and that exhibit a high degree of thoughtfulness, branding, imagination, inventiveness, and spirit; and to provide a process for the application of sign regulations in ways that will allow creatively designed signs that make a positive visual contribution to the overall image of the city, while mitigating the impacts of large or unusually designed signs.

pose. To encourage signs of unique design, and that exhibit a high degree of thoughtfulness, branding, imagination, inventiveness, and spirit; and to provide a process for the application of sign regulations in ways that will allow creatively designed signs that make a positive visual contribution to the overall image of the city, while mitigating the impacts of large or unusually designed signs.

  • (4) Application and Procedure Requirements. A sign permit application for a creative sign shall include all information and materials required by the department, and the filing fee set by the city’s fee resolution. A sign permit application for a creative sign shall be subject to review and approval by the director of development services when the proposed sign is fifty (50) square feet or less, and by the commission when the sign is larger than fifty (50) square feet. Notification for a sign permit for a creative sign shall be given in the same manner specified by this zoning ordinance for director-approved development permits.

  • (5) Design Criteria. In approving an application for a creative sign, the review authority shall ensure that a proposed sign meets the following design criteria.

    • (A) Design Quality Criteria. The sign shall: (i) constitute a substantial aesthetic improvement to the site and shall have a positive visual impact on the surrounding area; (ii) be of unique design, and exhibit a high degree of thoughtfulness, imagination, inventiveness, and spirit; and (iii) provide strong graphic character through the imaginative use of graphics, color, texture, quality materials, scale, and proportion.

    • (B) Contextual Criteria. The sign shall contain at least one of the following elements: (i) classic historic design style; (ii) creative image reflecting current or historic character of the city; (iii) symbols or imagery relating to the citrus packing industry; or (iv) inventive representation of the use, name, or logo of the structure or business.

    • (C) Architectural Criteria. The sign shall: (i) utilize or enhance the architectural elements of the building; and (ii) be placed in a logical location in relation to the overall composition of the building’s façade and not cover any key architectural features and details of the façade.

    • (D) Neighborhood Impacts. The sign shall be located and designed not to cause light and glare impacts on neighboring residential uses.

Table 4. Sign Standards by Use

Multifamily Residential Use

Table 4. Sign Standards by Use Table 4. Sign Standards by Use Table 4. Sign Standards by Use Table 4. Sign Standards by Use
Multifamily Residential Use
Allowed Sign Maximum Sign Height Maximum No. of
Signs Allowed per
Parcel
Maximum Sign Area
Allowed per Parcel
1. Wall or Freestanding Wall signs: below edge
of roof. Placement shall
only be located below
the roof or over the
primary entrance.
Freestanding: 48 in.
1 wall sign or
freestanding sign per
entrance or street
frontage
12 sf each per face
area; 24 sf maximum
total sf for all signs.
1. Awning Shall be entirely on
awning valance;
lettering max 66% of
valance height; valance
height max: 18 in.
50% of the area of the
valance front. 1 sign
max per each separate
awning valance.
1. Awning
2. Marquee To be established
during project review.
Allowed only for the
entrance of a theatre or
playhouse.
To be established
during project review. 1
sign max
2. Marquee
Nonresidential Use/Mixed-Use Nonresidential Use/Mixed-Use
--- --- ---
Allowed Sign Placement Standards Maximum Number and Sign
Area
3. Monument 5 ft. including base structure.
Allowed only on a site with more
than 100 ft. of continuous street
frontage.
36 sf
4. Projecting or
Suspended
16 inches from face of building
and bottom of sign shall be no
closer than 8 ft. above sidewalk
surface below.
6 sf. No dimension greater than 3
ft. Sign shall be redwood
sandblasted, hand carved or
architecturally designed.
5. Wall 2 ft. below parapet or eave.
Individual letters 18 inches.
1 sf. per linear foot primary
business.
Mounting 1-story: above 1st foor
windows.
1 sign allowed per business
frontage with pedestrian entrance.
Mounting multi-story: between
windows.
Side street or rear entrance wall
sign max 50% of the primary sign
area.
6. Window Permanent Within window area 15% of total window area max.
7. Window Temporary Within window area 25% of total window area. Allowed
for display a maximum of 15 days
at 1 time, up to 3 times in a 12-
month period.
8. A-Boards and other
Portable Sidewalk Signs
are permitted
May not impede pedestrian fow. 1 per business. Signs may only be
permitted while the business is
open. Requires an encroachment
permit if in the public right-of-way
and a creative sign permit.
Nonresidential Use/Mixed-Use Nonresidential Use/Mixed-Use
--- --- ---
Allowed Sign Placement Standards Maximum Number and Sign
Area
9. Building Wall Facing
RR ROW
Businesses may have signage
equal to or less than the allowable
projecting or wall sign standards.
Building or parcel must front along
Crowther Avenue and the Railroad
ROW.
10. Directional Signage on
Private Property
Cannot be freestanding and shall
be minimized for basic directional
functions.
Included in sign permit application
approval process.
  • (i) Legal Nonconforming Signs. A legal nonconforming sign is any permanent or temporary sign that was legally established and maintained in compliance with the provisions of all applicable laws in effect at the time of original installation but that does not now comply with the provisions of this chapter.

    • (1) General Requirements. A legal nonconforming sign shall lose its legal nonconforming status as defined herein, and brought into conformance with the provisions of this chapter if any of the following occur:

      • (A) Changes including enlargement, reduction, changes in of the legal nonconforming sign;

      • (B) Structural alteration for any reason;

      • (C) Re-established after a business is discontinued for sixty (60) days or more, subject to the amortization clause below; or

      • (D) Re-established after damage or destruction to fifty (50) percent or more of the value of the sign, or its components, as determined by the building official and subject to the amortization clause below.

    • (2) Maintenance and Changes. Sign copy and face changes, nonstructural modifications, and nonstructural maintenance (e.g., painting, rust removal) are allowed without a sign permit up to a maximum of twentyfive (25) percent of the existing total area of the sign. Face changes not including copy, and any nonstructural modifications exceeding twenty-five (25) percent of the existing total area of the sign, and any structural changes shall comply with all applicable standards of this chapter.

(Ord. O-2017-05 § 4, 2017)

§ 23.112.080. Amortization and existing uses.

  • (a) General Explanation. The proposed amortization clause seeks to preserve private property rights in existence at the time of this zone change. Immediately following adoption of the ordinance codified in this chapter, all legal uses, buildings or structures may continue to exist as a legal nonconforming use, building or structure.

  • (b) Five (5) years after the effective date of the ordinance codified in this chapter, any property that is sold or transferred may continue to operate a legally nonconforming use, building, or structure only in the following circumstances:

    • (1) The business/property is transferred from a parent to his or her child, from a child to his or her parent as defined in Chapter 23.04 of the municipal code.

    • (2) The business/property is transferred from an owner to his or her employee(s) such that the ownership does not change as defined in Chapter 23.04 of the municipal code.

  • (c) Notwithstanding the foregoing, five (5) years after the effective date of the ordinance codified in this chapter, the exception set forth in subsection (b) shall only apply if:

    • (1) The same use in existence as of five (5) years from effective date of the ordinance codified in this chapter will continue to operate. If the primary use of the business/property (not accessory uses), remains unchanged, then the secondary uses may change. Secondary uses are defined in the definitions section of this chapter. Secondary uses may also be “accessory uses” as defined in Chapter 23.04 of the PMC and which means “a use incidental, appropriate, subordinate and devoted exclusively to the main use of the lot or building”; and

    • (2) The building or structure is not modified or expanded; and

    • (3) The use, building or structure is not abandoned or discontinued for twelve (12) months or more.

  • (e) The city shall give notice to all property owners of properties within the Old Town regarding this chapter in the following manner:

    • (1) Within one hundred eighty (180) days of adoption of the ordinance codified in this chapter;

    • (2) Within three (3) years after adoption of the ordinance codified in this chapter; and

    • (3) At least four (4) years after adoption of the ordinance codified in this chapter.

Failure to provide any of the notices above shall not prevent the city from enforcing the requirements of this chapter.

  • (f) This section shall not apply to the property located at 102 S. Bradford, Placentia, CA which is subject to the Chapter 23.06 “Placentia Historic Resources Ordinance” and the California Public Resources Code Section 21000 et seq. “California Environmental Quality Act” as a historic resource. Due to its historical significance, conflict in complying with the historic resource provisions referenced herein, while also bringing the property into compliance with this chapter along with the costs associated with bringing the use, building or structure into compliance with this chapter, the property at 102 S. Bradford is exempt from Section 23.112.080 set forth herein. Additionally, all properties located within the R-2 overlay and/or improved with a single-family residence are exempt from Section 23.112.080 as set forth herein.

  • (Ord. O-2017-05 § 4, 2017)

§ 23.112.090. Public art/public plazas.

Public art and public plazas are encouraged in every development. Public art or plazas may be required as part of a development agreement for those developments that include twenty (20) or more units or which are over ten thousand (10,000) square feet. This includes new construction and remodel/rehabilitation of existing structures. Public art is encouraged to reflect the history of Old Town Placentia and the citrus growing industry.

Generally, the plans for proposed plazas or public art shall be part of the entitlement package submitted. The plazas may be located on the project site or at another location set forth in a development agreement, but must be located within the Old Town boundaries. (Ord. O-2017-05 § 4, 2017)

§ 23.112.100. Old Town development community facilities district fee program.

In addition to city baseline impact fees, Old Town will require additional public realm improvements and projects are subject to an Old Town community facilities district fee that ensures all public sector infrastructure improvements can be provided. In addition to the Old Town community facilities district fee, all projects will be required to install public infrastructure and streetscape elements up to the curb face of the public street immediately adjacent to the project, in accordance with the public realm development standards.

(Ord. O-2017-05 § 4, 2017)